[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC 07/29] migration: better error handling with QEMUF
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [RFC 07/29] migration: better error handling with QEMUFile |
Date: |
Mon, 31 Jul 2017 19:39:24 +0100 |
User-agent: |
Mutt/1.8.3 (2017-05-23) |
* Peter Xu (address@hidden) wrote:
> If the postcopy down due to some reason, we can always see this on dst:
>
> qemu-system-x86_64: RP: Received invalid message 0x0000 length 0x0000
>
> However in most cases that's not the real issue. The problem is that
> qemu_get_be16() has no way to show whether the returned data is valid or
> not, and we are _always_ assuming it is valid. That's possibly not wise.
>
> The best approach to solve this would be: refactoring QEMUFile interface
> to allow the APIs to return error if there is. However it needs quite a
> bit of work and testing. For now, let's explicitly check the validity
> first before using the data in all places for qemu_get_*().
>
> This patch tries to fix most of the cases I can see. Only if we are with
> this, can we make sure we are processing the valid data, and also can we
> make sure we can capture the channel down events correctly.
>
> Signed-off-by: Peter Xu <address@hidden>
> ---
> migration/migration.c | 5 +++++
> migration/ram.c | 22 ++++++++++++++++++----
> migration/savevm.c | 29 +++++++++++++++++++++++++++--
> 3 files changed, 50 insertions(+), 6 deletions(-)
>
> diff --git a/migration/migration.c b/migration/migration.c
> index bdc4445..5b2602e 100644
> --- a/migration/migration.c
> +++ b/migration/migration.c
> @@ -1543,6 +1543,11 @@ static void *source_return_path_thread(void *opaque)
> header_type = qemu_get_be16(rp);
> header_len = qemu_get_be16(rp);
>
> + if (qemu_file_get_error(rp)) {
> + mark_source_rp_bad(ms);
> + goto out;
> + }
> +
> if (header_type >= MIG_RP_MSG_MAX ||
> header_type == MIG_RP_MSG_INVALID) {
> error_report("RP: Received invalid message 0x%04x length 0x%04x",
> diff --git a/migration/ram.c b/migration/ram.c
> index c12358d..7f4cb0f 100644
> --- a/migration/ram.c
> +++ b/migration/ram.c
> @@ -2416,7 +2416,7 @@ static int ram_load_postcopy(QEMUFile *f)
> void *last_host = NULL;
> bool all_zero = false;
>
> - while (!ret && !(flags & RAM_SAVE_FLAG_EOS)) {
> + while (!(flags & RAM_SAVE_FLAG_EOS)) {
> ram_addr_t addr;
> void *host = NULL;
> void *page_buffer = NULL;
> @@ -2425,6 +2425,16 @@ static int ram_load_postcopy(QEMUFile *f)
> uint8_t ch;
>
> addr = qemu_get_be64(f);
> +
> + /*
> + * If qemu file error, we should stop here, and then "addr"
> + * may be invalid
> + */
> + if (qemu_file_get_error(f)) {
> + ret = qemu_file_get_error(f);
> + break;
> + }
I'd prefer:
ret = qemu_file_get_error(f);
if (ret) {
break;
}
> +
> flags = addr & ~TARGET_PAGE_MASK;
> addr &= TARGET_PAGE_MASK;
>
> @@ -2505,6 +2515,13 @@ static int ram_load_postcopy(QEMUFile *f)
> error_report("Unknown combination of migration flags: %#x"
> " (postcopy mode)", flags);
> ret = -EINVAL;
> + break;
> + }
> +
> + /* Detect for any possible file errors */
> + if (qemu_file_get_error(f)) {
> + ret = qemu_file_get_error(f);
> + break;
> }
>
> if (place_needed) {
> @@ -2519,9 +2536,6 @@ static int ram_load_postcopy(QEMUFile *f)
> place_source, block);
> }
> }
> - if (!ret) {
> - ret = qemu_file_get_error(f);
> - }
I think we've lost an error check here; the code before this does:
ret = postcopy_place_page.....
and if that failed it used to be detected by the !ret check in the
while condition, but with that gone, we need to add a check for ret
after the place page.
> }
>
> return ret;
> diff --git a/migration/savevm.c b/migration/savevm.c
> index fdd15fa..13ae9d6 100644
> --- a/migration/savevm.c
> +++ b/migration/savevm.c
> @@ -1720,6 +1720,11 @@ static int loadvm_process_command(QEMUFile *f)
> cmd = qemu_get_be16(f);
> len = qemu_get_be16(f);
>
> + /* Check validity before continue processing of cmds */
> + if (qemu_file_get_error(f)) {
> + return qemu_file_get_error(f);
> + }
> +
> trace_loadvm_process_command(cmd, len);
> if (cmd >= MIG_CMD_MAX || cmd == MIG_CMD_INVALID) {
> error_report("MIG_CMD 0x%x unknown (len 0x%x)", cmd, len);
> @@ -1855,6 +1860,11 @@ qemu_loadvm_section_start_full(QEMUFile *f,
> MigrationIncomingState *mis)
> return -EINVAL;
> }
>
> + /* Check validity before load the vmstate */
> + if (qemu_file_get_error(f)) {
> + return qemu_file_get_error(f);
> + }
> +
Do you need a check after the instance_id/version_id read and in
check_section_footer?
> ret = vmstate_load(f, se);
> if (ret < 0) {
> error_report("error while loading state for instance 0x%x of"
> @@ -1888,6 +1898,11 @@ qemu_loadvm_section_part_end(QEMUFile *f,
> MigrationIncomingState *mis)
> return -EINVAL;
> }
>
> + /* Check validity before load the vmstate */
> + if (qemu_file_get_error(f)) {
> + return qemu_file_get_error(f);
> + }
> +
Similar question; do you need the check after the section_id = read ?
> ret = vmstate_load(f, se);
> if (ret < 0) {
> error_report("error while loading state section id %d(%s)",
> @@ -1944,8 +1959,14 @@ static int qemu_loadvm_state_main(QEMUFile *f,
> MigrationIncomingState *mis)
> uint8_t section_type;
> int ret = 0;
>
> - while ((section_type = qemu_get_byte(f)) != QEMU_VM_EOF) {
> - ret = 0;
> + while (true) {
> + section_type = qemu_get_byte(f);
> +
> + if (qemu_file_get_error(f)) {
> + ret = qemu_file_get_error(f);
> + break;
> + }
> +
> trace_qemu_loadvm_state_section(section_type);
> switch (section_type) {
> case QEMU_VM_SECTION_START:
> @@ -1969,6 +1990,10 @@ static int qemu_loadvm_state_main(QEMUFile *f,
> MigrationIncomingState *mis)
> goto out;
> }
> break;
> + case QEMU_VM_EOF:
> + /* This is the end of migration */
> + goto out;
> + break;
Just the goto is sufficient there.
> default:
> error_report("Unknown savevm section type %d", section_type);
> ret = -EINVAL;
> --
> 2.7.4
Dave
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [Qemu-devel] [RFC 04/29] bitmap: introduce bitmap_invert(), (continued)
- [Qemu-devel] [RFC 04/29] bitmap: introduce bitmap_invert(), Peter Xu, 2017/07/28
- [Qemu-devel] [RFC 05/29] bitmap: introduce bitmap_count_one(), Peter Xu, 2017/07/28
- [Qemu-devel] [RFC 06/29] migration: dump str in migrate_set_state trace, Peter Xu, 2017/07/28
- [Qemu-devel] [RFC 08/29] migration: reuse mis->userfault_quit_fd, Peter Xu, 2017/07/28
- [Qemu-devel] [RFC 07/29] migration: better error handling with QEMUFile, Peter Xu, 2017/07/28
- Re: [Qemu-devel] [RFC 07/29] migration: better error handling with QEMUFile,
Dr. David Alan Gilbert <=
- [Qemu-devel] [RFC 09/29] migration: provide postcopy_fault_thread_notify(), Peter Xu, 2017/07/28
- [Qemu-devel] [RFC 10/29] migration: new property "x-postcopy-fast", Peter Xu, 2017/07/28
- [Qemu-devel] [RFC 11/29] migration: new postcopy-pause state, Peter Xu, 2017/07/28