[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 3/5] migration/rdma: Allow cancelling while w
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH v2 3/5] migration/rdma: Allow cancelling while waiting for wrid |
Date: |
Fri, 14 Jul 2017 12:13:11 +0100 |
User-agent: |
Mutt/1.8.3 (2017-05-23) |
* Peter Xu (address@hidden) wrote:
> On Thu, Jul 13, 2017 at 12:56:47PM +0100, Dr. David Alan Gilbert (git) wrote:
> > From: "Dr. David Alan Gilbert" <address@hidden>
> >
> > When waiting for a WRID, if the other side dies we end up waiting
> > for ever with no way to cancel the migration.
> > Cure this by poll()ing the fd first with a timeout and checking
> > error flags and migration state.
> >
> > Signed-off-by: Dr. David Alan Gilbert <address@hidden>
> > ---
> > migration/rdma.c | 52 ++++++++++++++++++++++++++++++++++++++++++++++------
> > 1 file changed, 46 insertions(+), 6 deletions(-)
> >
> > diff --git a/migration/rdma.c b/migration/rdma.c
> > index 6111e10c70..30f5542b49 100644
> > --- a/migration/rdma.c
> > +++ b/migration/rdma.c
> > @@ -1466,6 +1466,50 @@ static uint64_t qemu_rdma_poll(RDMAContext *rdma,
> > uint64_t *wr_id_out,
> > return 0;
> > }
> >
> > +/* Wait for activity on the completion channel.
> > + * Returns 0 on success, none-0 on error.
> > + */
> > +static int qemu_rdma_wait_comp_channel(RDMAContext *rdma)
> > +{
> > + /*
> > + * Coroutine doesn't start until migration_fd_process_incoming()
> > + * so don't yield unless we know we're running inside of a coroutine.
> > + */
> > + if (rdma->migration_started_on_destination) {
> > + yield_until_fd_readable(rdma->comp_channel->fd);
> > + } else {
> > + /* This is the source side, we're in a separate thread
> > + * or destination prior to migration_fd_process_incoming()
> > + * we can't yield; so we have to poll the fd.
> > + * But we need to be able to handle 'cancel' or an error
> > + * without hanging forever.
> > + */
> > + while (!rdma->error_state && !rdma->received_error) {
> > + GPollFD pfds[1];
> > + pfds[0].fd = rdma->comp_channel->fd;
> > + pfds[0].events = G_IO_IN | G_IO_HUP | G_IO_ERR;
> > + /* 0.1s timeout, should be fine for a 'cancel' */
> > + switch (qemu_poll_ns(pfds, 1, 100 * 1000 * 1000)) {
> > + case 1: /* fd active */
> > + return 0;
> > +
> > + case 0: /* Timeout, go around again */
> > + break;
> > +
> > + default: /* Error of some type */
> > + return -1;
> > + }
> > +
> > + if (migrate_get_current()->state ==
> > MIGRATION_STATUS_CANCELLING) {
> > + /* Bail out and let the cancellation happen */
> > + return -EPIPE;
> > + }
> > + }
> > + }
> > +
> > + return rdma->error_state || rdma->received_error;
>
> Just to note that this operation will return either 0 or 1, but not
> anything <0 (most RDMA codes are using <0 as error, and error_state
> should be <= 0 always iiuc).
>
> But as the comment for this function, it's fine.
It's interesting in that 'error_state' is a -ve error code, where as
received_error is just a boolean; I've changed this to:
if (rdma->received->error) {
return -EPIPE;
}
return rdma->error_state;
to make it a bit more consistent.
> > +}
> > +
> > /*
> > * Block until the next work request has completed.
> > *
> > @@ -1513,12 +1557,8 @@ static int qemu_rdma_block_for_wrid(RDMAContext
> > *rdma, int wrid_requested,
> > }
> >
> > while (1) {
> > - /*
> > - * Coroutine doesn't start until migration_fd_process_incoming()
> > - * so don't yield unless we know we're running inside of a
> > coroutine.
> > - */
> > - if (rdma->migration_started_on_destination) {
> > - yield_until_fd_readable(rdma->comp_channel->fd);
> > + if (qemu_rdma_wait_comp_channel(rdma)) {
>
> Do we want something like:
>
> ret = -EIO;
>
> Here? Or capture the return code of qemu_rdma_wait_comp_channel() (but
> then we need to make sure its return code is <0)?
>
> I guess "ret" is still zero, and it means this function will return
> with zero as well even timed out?
But rdma->error_state is set if wait_comp_channel fails;
(actually it wasn't in one case, where the poll fails, I've just fixed
that and will repost).
Dave
> Thanks,
>
> --
> Peter Xu
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [Qemu-devel] [PATCH v2 0/5] A bunch of RDMA fixes, Dr. David Alan Gilbert (git), 2017/07/13
- [Qemu-devel] [PATCH v2 1/5] migration/rdma: Fix race on source, Dr. David Alan Gilbert (git), 2017/07/13
- [Qemu-devel] [PATCH v2 2/5] migration: Close file on failed migration load, Dr. David Alan Gilbert (git), 2017/07/13
- [Qemu-devel] [PATCH v2 3/5] migration/rdma: Allow cancelling while waiting for wrid, Dr. David Alan Gilbert (git), 2017/07/13
- [Qemu-devel] [PATCH v2 4/5] migration/rdma: Safely convert control types, Dr. David Alan Gilbert (git), 2017/07/13
- [Qemu-devel] [PATCH v2 5/5] migration/rdma: Send error during cancelling, Dr. David Alan Gilbert (git), 2017/07/13