qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 3/3] ahci: split public and private interface


From: John Snow
Subject: [Qemu-devel] [PATCH 3/3] ahci: split public and private interface
Date: Fri, 23 Jun 2017 18:09:26 -0400

Complete the split by renaming ahci_public.h --> ahci.h and
moving the current ahci.h to hw/ide/ahci_internal.h.

Adjust ahci_internal.h to now load ahci.h instead of ahci_public.h.

Finalize the split by switching external users to the new header.

Signed-off-by: John Snow <address@hidden>
---
 hw/ide/ahci.c                |   2 +-
 hw/ide/ahci_internal.h       | 359 +++++++++++++++++++++++++++++++++++++++++
 hw/ide/ich.c                 |   2 +-
 include/hw/ide/ahci.h        | 368 ++++++-------------------------------------
 include/hw/ide/ahci_public.h |  91 -----------
 5 files changed, 411 insertions(+), 411 deletions(-)
 create mode 100644 hw/ide/ahci_internal.h
 delete mode 100644 include/hw/ide/ahci_public.h

diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 1ab3245..fdb1b11 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -32,7 +32,7 @@
 #include "sysemu/dma.h"
 #include "hw/ide/internal.h"
 #include "hw/ide/pci.h"
-#include "hw/ide/ahci.h"
+#include "hw/ide/ahci_internal.h"
 
 #define DEBUG_AHCI 0
 
diff --git a/hw/ide/ahci_internal.h b/hw/ide/ahci_internal.h
new file mode 100644
index 0000000..1e21169
--- /dev/null
+++ b/hw/ide/ahci_internal.h
@@ -0,0 +1,359 @@
+/*
+ * QEMU AHCI Emulation
+ *
+ * Copyright (c) 2010 address@hidden
+ * Copyright (c) 2010 Roland Elek <address@hidden>
+ * Copyright (c) 2010 Sebastian Herbszt <address@hidden>
+ * Copyright (c) 2010 Alexander Graf <address@hidden>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef HW_IDE_AHCI_INTERNAL_H
+#define HW_IDE_AHCI_INTERNAL_H
+
+#include "hw/ide/ahci.h"
+#include "hw/sysbus.h"
+
+#define AHCI_MEM_BAR_SIZE         0x1000
+#define AHCI_MAX_PORTS            32
+#define AHCI_MAX_SG               168 /* hardware max is 64K */
+#define AHCI_DMA_BOUNDARY         0xffffffff
+#define AHCI_USE_CLUSTERING       0
+#define AHCI_MAX_CMDS             32
+#define AHCI_CMD_SZ               32
+#define AHCI_CMD_SLOT_SZ          (AHCI_MAX_CMDS * AHCI_CMD_SZ)
+#define AHCI_RX_FIS_SZ            256
+#define AHCI_CMD_TBL_CDB          0x40
+#define AHCI_CMD_TBL_HDR_SZ       0x80
+#define AHCI_CMD_TBL_SZ           (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
+#define AHCI_CMD_TBL_AR_SZ        (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
+#define AHCI_PORT_PRIV_DMA_SZ     (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
+                                   AHCI_RX_FIS_SZ)
+
+#define AHCI_IRQ_ON_SG            (1U << 31)
+#define AHCI_CMD_ATAPI            (1 << 5)
+#define AHCI_CMD_WRITE            (1 << 6)
+#define AHCI_CMD_PREFETCH         (1 << 7)
+#define AHCI_CMD_RESET            (1 << 8)
+#define AHCI_CMD_CLR_BUSY         (1 << 10)
+
+#define RX_FIS_D2H_REG            0x40 /* offset of D2H Register FIS data */
+#define RX_FIS_SDB                0x58 /* offset of SDB FIS data */
+#define RX_FIS_UNK                0x60 /* offset of Unknown FIS data */
+
+/* global controller registers */
+#define HOST_CAP                  0x00 /* host capabilities */
+#define HOST_CTL                  0x04 /* global host control */
+#define HOST_IRQ_STAT             0x08 /* interrupt status */
+#define HOST_PORTS_IMPL           0x0c /* bitmap of implemented ports */
+#define HOST_VERSION              0x10 /* AHCI spec. version compliancy */
+
+/* HOST_CTL bits */
+#define HOST_CTL_RESET            (1 << 0)  /* reset controller; self-clear */
+#define HOST_CTL_IRQ_EN           (1 << 1)  /* global IRQ enable */
+#define HOST_CTL_AHCI_EN          (1U << 31) /* AHCI enabled */
+
+/* HOST_CAP bits */
+#define HOST_CAP_SSC              (1 << 14) /* Slumber capable */
+#define HOST_CAP_AHCI             (1 << 18) /* AHCI only */
+#define HOST_CAP_CLO              (1 << 24) /* Command List Override support */
+#define HOST_CAP_SSS              (1 << 27) /* Staggered Spin-up */
+#define HOST_CAP_NCQ              (1 << 30) /* Native Command Queueing */
+#define HOST_CAP_64               (1U << 31) /* PCI DAC (64-bit DMA) support */
+
+/* registers for each SATA port */
+#define PORT_LST_ADDR             0x00 /* command list DMA addr */
+#define PORT_LST_ADDR_HI          0x04 /* command list DMA addr hi */
+#define PORT_FIS_ADDR             0x08 /* FIS rx buf addr */
+#define PORT_FIS_ADDR_HI          0x0c /* FIS rx buf addr hi */
+#define PORT_IRQ_STAT             0x10 /* interrupt status */
+#define PORT_IRQ_MASK             0x14 /* interrupt enable/disable mask */
+#define PORT_CMD                  0x18 /* port command */
+#define PORT_TFDATA               0x20 /* taskfile data */
+#define PORT_SIG                  0x24 /* device TF signature */
+#define PORT_SCR_STAT             0x28 /* SATA phy register: SStatus */
+#define PORT_SCR_CTL              0x2c /* SATA phy register: SControl */
+#define PORT_SCR_ERR              0x30 /* SATA phy register: SError */
+#define PORT_SCR_ACT              0x34 /* SATA phy register: SActive */
+#define PORT_CMD_ISSUE            0x38 /* command issue */
+#define PORT_RESERVED             0x3c /* reserved */
+
+/* PORT_IRQ_{STAT,MASK} bits */
+#define PORT_IRQ_COLD_PRES        (1U << 31) /* cold presence detect */
+#define PORT_IRQ_TF_ERR           (1 << 30) /* task file error */
+#define PORT_IRQ_HBUS_ERR         (1 << 29) /* host bus fatal error */
+#define PORT_IRQ_HBUS_DATA_ERR    (1 << 28) /* host bus data error */
+#define PORT_IRQ_IF_ERR           (1 << 27) /* interface fatal error */
+#define PORT_IRQ_IF_NONFATAL      (1 << 26) /* interface non-fatal error */
+#define PORT_IRQ_OVERFLOW         (1 << 24) /* xfer exhausted available S/G */
+#define PORT_IRQ_BAD_PMP          (1 << 23) /* incorrect port multiplier */
+
+#define PORT_IRQ_PHYRDY           (1 << 22) /* PhyRdy changed */
+#define PORT_IRQ_DEV_ILCK         (1 << 7) /* device interlock */
+#define PORT_IRQ_CONNECT          (1 << 6) /* port connect change status */
+#define PORT_IRQ_SG_DONE          (1 << 5) /* descriptor processed */
+#define PORT_IRQ_UNK_FIS          (1 << 4) /* unknown FIS rx'd */
+#define PORT_IRQ_SDB_FIS          (1 << 3) /* Set Device Bits FIS rx'd */
+#define PORT_IRQ_DMAS_FIS         (1 << 2) /* DMA Setup FIS rx'd */
+#define PORT_IRQ_PIOS_FIS         (1 << 1) /* PIO Setup FIS rx'd */
+#define PORT_IRQ_D2H_REG_FIS      (1 << 0) /* D2H Register FIS rx'd */
+
+#define PORT_IRQ_FREEZE           (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR |   \
+                                   PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY |    \
+                                   PORT_IRQ_UNK_FIS)
+#define PORT_IRQ_ERROR            (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR |     \
+                                   PORT_IRQ_HBUS_DATA_ERR)
+#define DEF_PORT_IRQ              (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |     \
+                                   PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |  \
+                                   PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
+
+/* PORT_CMD bits */
+#define PORT_CMD_ATAPI            (1 << 24) /* Device is ATAPI */
+#define PORT_CMD_LIST_ON          (1 << 15) /* cmd list DMA engine running */
+#define PORT_CMD_FIS_ON           (1 << 14) /* FIS DMA engine running */
+#define PORT_CMD_FIS_RX           (1 << 4) /* Enable FIS receive DMA engine */
+#define PORT_CMD_CLO              (1 << 3) /* Command list override */
+#define PORT_CMD_POWER_ON         (1 << 2) /* Power up device */
+#define PORT_CMD_SPIN_UP          (1 << 1) /* Spin up device */
+#define PORT_CMD_START            (1 << 0) /* Enable port DMA engine */
+
+#define PORT_CMD_ICC_MASK        (0xfU << 28) /* i/f ICC state mask */
+#define PORT_CMD_ICC_ACTIVE       (0x1 << 28) /* Put i/f in active state */
+#define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
+#define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */
+
+#define PORT_CMD_RO_MASK          0x007dffe0 /* Which CMD bits are read only? 
*/
+
+/* ap->flags bits */
+#define AHCI_FLAG_NO_NCQ                  (1 << 24)
+#define AHCI_FLAG_IGN_IRQ_IF_ERR          (1 << 25) /* ignore IRQ_IF_ERR */
+#define AHCI_FLAG_HONOR_PI                (1 << 26) /* honor PORTS_IMPL */
+#define AHCI_FLAG_IGN_SERR_INTERNAL       (1 << 27) /* ignore SERR_INTERNAL */
+#define AHCI_FLAG_32BIT_ONLY              (1 << 28) /* force 32bit */
+
+#define ATA_SRST                          (1 << 2)  /* software reset */
+
+#define STATE_RUN                         0
+#define STATE_RESET                       1
+
+#define SATA_SCR_SSTATUS_DET_NODEV        0x0
+#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
+
+#define SATA_SCR_SSTATUS_SPD_NODEV        0x00
+#define SATA_SCR_SSTATUS_SPD_GEN1         0x10
+
+#define SATA_SCR_SSTATUS_IPM_NODEV        0x000
+#define SATA_SCR_SSTATUS_IPM_ACTIVE       0X100
+
+#define AHCI_SCR_SCTL_DET                 0xf
+
+#define SATA_FIS_TYPE_REGISTER_H2D        0x27
+#define   SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
+#define SATA_FIS_TYPE_REGISTER_D2H        0x34
+#define SATA_FIS_TYPE_PIO_SETUP           0x5f
+#define SATA_FIS_TYPE_SDB                 0xA1
+
+#define AHCI_CMD_HDR_CMD_FIS_LEN           0x1f
+#define AHCI_CMD_HDR_PRDT_LEN              16
+
+#define SATA_SIGNATURE_CDROM               0xeb140101
+#define SATA_SIGNATURE_DISK                0x00000101
+
+#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
+                                            /* Shouldn't this be 0x2c? */
+
+#define AHCI_PORT_REGS_START_ADDR          0x100
+#define AHCI_PORT_ADDR_OFFSET_MASK         0x7f
+#define AHCI_PORT_ADDR_OFFSET_LEN          0x80
+
+#define AHCI_NUM_COMMAND_SLOTS             31
+#define AHCI_SUPPORTED_SPEED               20
+#define AHCI_SUPPORTED_SPEED_GEN1          1
+#define AHCI_VERSION_1_0                   0x10000
+
+#define AHCI_PROGMODE_MAJOR_REV_1          1
+
+#define AHCI_COMMAND_TABLE_ACMD            0x40
+
+#define AHCI_PRDT_SIZE_MASK                0x3fffff
+
+#define IDE_FEATURE_DMA                    1
+
+#define READ_FPDMA_QUEUED                  0x60
+#define WRITE_FPDMA_QUEUED                 0x61
+#define NCQ_NON_DATA                       0x63
+#define RECEIVE_FPDMA_QUEUED               0x65
+#define SEND_FPDMA_QUEUED                  0x64
+
+#define NCQ_FIS_FUA_MASK                   0x80
+#define NCQ_FIS_RARC_MASK                  0x01
+
+#define RES_FIS_DSFIS                      0x00
+#define RES_FIS_PSFIS                      0x20
+#define RES_FIS_RFIS                       0x40
+#define RES_FIS_SDBFIS                     0x58
+#define RES_FIS_UFIS                       0x60
+
+#define SATA_CAP_SIZE           0x8
+#define SATA_CAP_REV            0x2
+#define SATA_CAP_BAR            0x4
+
+typedef struct AHCIPortRegs {
+    uint32_t    lst_addr;
+    uint32_t    lst_addr_hi;
+    uint32_t    fis_addr;
+    uint32_t    fis_addr_hi;
+    uint32_t    irq_stat;
+    uint32_t    irq_mask;
+    uint32_t    cmd;
+    uint32_t    unused0;
+    uint32_t    tfdata;
+    uint32_t    sig;
+    uint32_t    scr_stat;
+    uint32_t    scr_ctl;
+    uint32_t    scr_err;
+    uint32_t    scr_act;
+    uint32_t    cmd_issue;
+    uint32_t    reserved;
+} AHCIPortRegs;
+
+typedef struct AHCICmdHdr {
+    uint16_t    opts;
+    uint16_t    prdtl;
+    uint32_t    status;
+    uint64_t    tbl_addr;
+    uint32_t    reserved[4];
+} QEMU_PACKED AHCICmdHdr;
+
+typedef struct AHCI_SG {
+    uint64_t    addr;
+    uint32_t    reserved;
+    uint32_t    flags_size;
+} QEMU_PACKED AHCI_SG;
+
+typedef struct NCQTransferState {
+    AHCIDevice *drive;
+    BlockAIOCB *aiocb;
+    AHCICmdHdr *cmdh;
+    QEMUSGList sglist;
+    BlockAcctCookie acct;
+    uint32_t sector_count;
+    uint64_t lba;
+    uint8_t tag;
+    uint8_t cmd;
+    uint8_t slot;
+    bool used;
+    bool halt;
+} NCQTransferState;
+
+struct AHCIDevice {
+    IDEDMA dma;
+    IDEBus port;
+    int port_no;
+    uint32_t port_state;
+    uint32_t finished;
+    AHCIPortRegs port_regs;
+    struct AHCIState *hba;
+    QEMUBH *check_bh;
+    uint8_t *lst;
+    uint8_t *res_fis;
+    bool done_atapi_packet;
+    int32_t busy_slot;
+    bool init_d2h_sent;
+    AHCICmdHdr *cur_cmd;
+    NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
+};
+
+struct AHCIPCIState {
+    /*< private >*/
+    PCIDevice parent_obj;
+    /*< public >*/
+
+    AHCIState ahci;
+};
+
+#define TYPE_ICH9_AHCI "ich9-ahci"
+
+#define ICH_AHCI(obj) \
+    OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
+
+extern const VMStateDescription vmstate_ahci;
+
+#define VMSTATE_AHCI(_field, _state) {                               \
+    .name       = (stringify(_field)),                               \
+    .size       = sizeof(AHCIState),                                 \
+    .vmsd       = &vmstate_ahci,                                     \
+    .flags      = VMS_STRUCT,                                        \
+    .offset     = vmstate_offset_value(_state, _field, AHCIState),   \
+}
+
+/**
+ * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
+ * but some fields have been re-mapped and re-purposed, as seen in
+ * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
+ *
+ * cmd_fis[3], feature 7:0, becomes sector count 7:0.
+ * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
+ * cmd_fis[11], feature 15:8, becomes sector count 15:8.
+ * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
+ * cmd_fis[13], count 15:8, becomes the priority value (7:6)
+ * bytes 16-19 become an le32 "auxiliary" field.
+ */
+typedef struct NCQFrame {
+    uint8_t fis_type;
+    uint8_t c;
+    uint8_t command;
+    uint8_t sector_count_low;  /* (feature 7:0) */
+    uint8_t lba0;
+    uint8_t lba1;
+    uint8_t lba2;
+    uint8_t fua;               /* (device 7:0) */
+    uint8_t lba3;
+    uint8_t lba4;
+    uint8_t lba5;
+    uint8_t sector_count_high; /* (feature 15:8) */
+    uint8_t tag;               /* (count 0:7) */
+    uint8_t prio;              /* (count 15:8) */
+    uint8_t icc;
+    uint8_t control;
+    uint8_t aux0;
+    uint8_t aux1;
+    uint8_t aux2;
+    uint8_t aux3;
+} QEMU_PACKED NCQFrame;
+
+typedef struct SDBFIS {
+    uint8_t type;
+    uint8_t flags;
+    uint8_t status;
+    uint8_t error;
+    uint32_t payload;
+} QEMU_PACKED SDBFIS;
+
+void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int 
ports);
+void ahci_init(AHCIState *s, DeviceState *qdev);
+void ahci_uninit(AHCIState *s);
+
+void ahci_reset(AHCIState *s);
+
+#define TYPE_SYSBUS_AHCI "sysbus-ahci"
+#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
+
+#define TYPE_ALLWINNER_AHCI "allwinner-ahci"
+#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
+                       TYPE_ALLWINNER_AHCI)
+
+#endif /* HW_IDE_AHCI_H */
diff --git a/hw/ide/ich.c b/hw/ide/ich.c
index 4599169..8266345 100644
--- a/hw/ide/ich.c
+++ b/hw/ide/ich.c
@@ -69,7 +69,7 @@
 #include "sysemu/block-backend.h"
 #include "sysemu/dma.h"
 #include "hw/ide/pci.h"
-#include "hw/ide/ahci.h"
+#include "hw/ide/ahci_internal.h"
 
 #define ICH9_MSI_CAP_OFFSET     0x80
 #define ICH9_SATA_CAP_OFFSET    0xA8
diff --git a/include/hw/ide/ahci.h b/include/hw/ide/ahci.h
index 70a0140..5a06537 100644
--- a/include/hw/ide/ahci.h
+++ b/include/hw/ide/ahci.h
@@ -21,339 +21,71 @@
  *
  */
 
-#ifndef HW_IDE_AHCI_INTERNAL_H
-#define HW_IDE_AHCI_INTERNAL_H
+#ifndef HW_IDE_AHCI_H
+#define HW_IDE_AHCI_H
 
-#include "hw/ide/ahci_public.h"
 #include "hw/sysbus.h"
 
-#define AHCI_MEM_BAR_SIZE         0x1000
-#define AHCI_MAX_PORTS            32
-#define AHCI_MAX_SG               168 /* hardware max is 64K */
-#define AHCI_DMA_BOUNDARY         0xffffffff
-#define AHCI_USE_CLUSTERING       0
-#define AHCI_MAX_CMDS             32
-#define AHCI_CMD_SZ               32
-#define AHCI_CMD_SLOT_SZ          (AHCI_MAX_CMDS * AHCI_CMD_SZ)
-#define AHCI_RX_FIS_SZ            256
-#define AHCI_CMD_TBL_CDB          0x40
-#define AHCI_CMD_TBL_HDR_SZ       0x80
-#define AHCI_CMD_TBL_SZ           (AHCI_CMD_TBL_HDR_SZ + (AHCI_MAX_SG * 16))
-#define AHCI_CMD_TBL_AR_SZ        (AHCI_CMD_TBL_SZ * AHCI_MAX_CMDS)
-#define AHCI_PORT_PRIV_DMA_SZ     (AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + \
-                                   AHCI_RX_FIS_SZ)
-
-#define AHCI_IRQ_ON_SG            (1U << 31)
-#define AHCI_CMD_ATAPI            (1 << 5)
-#define AHCI_CMD_WRITE            (1 << 6)
-#define AHCI_CMD_PREFETCH         (1 << 7)
-#define AHCI_CMD_RESET            (1 << 8)
-#define AHCI_CMD_CLR_BUSY         (1 << 10)
-
-#define RX_FIS_D2H_REG            0x40 /* offset of D2H Register FIS data */
-#define RX_FIS_SDB                0x58 /* offset of SDB FIS data */
-#define RX_FIS_UNK                0x60 /* offset of Unknown FIS data */
-
-/* global controller registers */
-#define HOST_CAP                  0x00 /* host capabilities */
-#define HOST_CTL                  0x04 /* global host control */
-#define HOST_IRQ_STAT             0x08 /* interrupt status */
-#define HOST_PORTS_IMPL           0x0c /* bitmap of implemented ports */
-#define HOST_VERSION              0x10 /* AHCI spec. version compliancy */
-
-/* HOST_CTL bits */
-#define HOST_CTL_RESET            (1 << 0)  /* reset controller; self-clear */
-#define HOST_CTL_IRQ_EN           (1 << 1)  /* global IRQ enable */
-#define HOST_CTL_AHCI_EN          (1U << 31) /* AHCI enabled */
-
-/* HOST_CAP bits */
-#define HOST_CAP_SSC              (1 << 14) /* Slumber capable */
-#define HOST_CAP_AHCI             (1 << 18) /* AHCI only */
-#define HOST_CAP_CLO              (1 << 24) /* Command List Override support */
-#define HOST_CAP_SSS              (1 << 27) /* Staggered Spin-up */
-#define HOST_CAP_NCQ              (1 << 30) /* Native Command Queueing */
-#define HOST_CAP_64               (1U << 31) /* PCI DAC (64-bit DMA) support */
-
-/* registers for each SATA port */
-#define PORT_LST_ADDR             0x00 /* command list DMA addr */
-#define PORT_LST_ADDR_HI          0x04 /* command list DMA addr hi */
-#define PORT_FIS_ADDR             0x08 /* FIS rx buf addr */
-#define PORT_FIS_ADDR_HI          0x0c /* FIS rx buf addr hi */
-#define PORT_IRQ_STAT             0x10 /* interrupt status */
-#define PORT_IRQ_MASK             0x14 /* interrupt enable/disable mask */
-#define PORT_CMD                  0x18 /* port command */
-#define PORT_TFDATA               0x20 /* taskfile data */
-#define PORT_SIG                  0x24 /* device TF signature */
-#define PORT_SCR_STAT             0x28 /* SATA phy register: SStatus */
-#define PORT_SCR_CTL              0x2c /* SATA phy register: SControl */
-#define PORT_SCR_ERR              0x30 /* SATA phy register: SError */
-#define PORT_SCR_ACT              0x34 /* SATA phy register: SActive */
-#define PORT_CMD_ISSUE            0x38 /* command issue */
-#define PORT_RESERVED             0x3c /* reserved */
-
-/* PORT_IRQ_{STAT,MASK} bits */
-#define PORT_IRQ_COLD_PRES        (1U << 31) /* cold presence detect */
-#define PORT_IRQ_TF_ERR           (1 << 30) /* task file error */
-#define PORT_IRQ_HBUS_ERR         (1 << 29) /* host bus fatal error */
-#define PORT_IRQ_HBUS_DATA_ERR    (1 << 28) /* host bus data error */
-#define PORT_IRQ_IF_ERR           (1 << 27) /* interface fatal error */
-#define PORT_IRQ_IF_NONFATAL      (1 << 26) /* interface non-fatal error */
-#define PORT_IRQ_OVERFLOW         (1 << 24) /* xfer exhausted available S/G */
-#define PORT_IRQ_BAD_PMP          (1 << 23) /* incorrect port multiplier */
-
-#define PORT_IRQ_PHYRDY           (1 << 22) /* PhyRdy changed */
-#define PORT_IRQ_DEV_ILCK         (1 << 7) /* device interlock */
-#define PORT_IRQ_CONNECT          (1 << 6) /* port connect change status */
-#define PORT_IRQ_SG_DONE          (1 << 5) /* descriptor processed */
-#define PORT_IRQ_UNK_FIS          (1 << 4) /* unknown FIS rx'd */
-#define PORT_IRQ_SDB_FIS          (1 << 3) /* Set Device Bits FIS rx'd */
-#define PORT_IRQ_DMAS_FIS         (1 << 2) /* DMA Setup FIS rx'd */
-#define PORT_IRQ_PIOS_FIS         (1 << 1) /* PIO Setup FIS rx'd */
-#define PORT_IRQ_D2H_REG_FIS      (1 << 0) /* D2H Register FIS rx'd */
-
-#define PORT_IRQ_FREEZE           (PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR |   \
-                                   PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY |    \
-                                   PORT_IRQ_UNK_FIS)
-#define PORT_IRQ_ERROR            (PORT_IRQ_FREEZE | PORT_IRQ_TF_ERR |     \
-                                   PORT_IRQ_HBUS_DATA_ERR)
-#define DEF_PORT_IRQ              (PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |     \
-                                   PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |  \
-                                   PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
-
-/* PORT_CMD bits */
-#define PORT_CMD_ATAPI            (1 << 24) /* Device is ATAPI */
-#define PORT_CMD_LIST_ON          (1 << 15) /* cmd list DMA engine running */
-#define PORT_CMD_FIS_ON           (1 << 14) /* FIS DMA engine running */
-#define PORT_CMD_FIS_RX           (1 << 4) /* Enable FIS receive DMA engine */
-#define PORT_CMD_CLO              (1 << 3) /* Command list override */
-#define PORT_CMD_POWER_ON         (1 << 2) /* Power up device */
-#define PORT_CMD_SPIN_UP          (1 << 1) /* Spin up device */
-#define PORT_CMD_START            (1 << 0) /* Enable port DMA engine */
-
-#define PORT_CMD_ICC_MASK        (0xfU << 28) /* i/f ICC state mask */
-#define PORT_CMD_ICC_ACTIVE       (0x1 << 28) /* Put i/f in active state */
-#define PORT_CMD_ICC_PARTIAL      (0x2 << 28) /* Put i/f in partial state */
-#define PORT_CMD_ICC_SLUMBER      (0x6 << 28) /* Put i/f in slumber state */
-
-#define PORT_CMD_RO_MASK          0x007dffe0 /* Which CMD bits are read only? 
*/
-
-/* ap->flags bits */
-#define AHCI_FLAG_NO_NCQ                  (1 << 24)
-#define AHCI_FLAG_IGN_IRQ_IF_ERR          (1 << 25) /* ignore IRQ_IF_ERR */
-#define AHCI_FLAG_HONOR_PI                (1 << 26) /* honor PORTS_IMPL */
-#define AHCI_FLAG_IGN_SERR_INTERNAL       (1 << 27) /* ignore SERR_INTERNAL */
-#define AHCI_FLAG_32BIT_ONLY              (1 << 28) /* force 32bit */
-
-#define ATA_SRST                          (1 << 2)  /* software reset */
-
-#define STATE_RUN                         0
-#define STATE_RESET                       1
-
-#define SATA_SCR_SSTATUS_DET_NODEV        0x0
-#define SATA_SCR_SSTATUS_DET_DEV_PRESENT_PHY_UP 0x3
-
-#define SATA_SCR_SSTATUS_SPD_NODEV        0x00
-#define SATA_SCR_SSTATUS_SPD_GEN1         0x10
-
-#define SATA_SCR_SSTATUS_IPM_NODEV        0x000
-#define SATA_SCR_SSTATUS_IPM_ACTIVE       0X100
-
-#define AHCI_SCR_SCTL_DET                 0xf
-
-#define SATA_FIS_TYPE_REGISTER_H2D        0x27
-#define   SATA_FIS_REG_H2D_UPDATE_COMMAND_REGISTER 0x80
-#define SATA_FIS_TYPE_REGISTER_D2H        0x34
-#define SATA_FIS_TYPE_PIO_SETUP           0x5f
-#define SATA_FIS_TYPE_SDB                 0xA1
-
-#define AHCI_CMD_HDR_CMD_FIS_LEN           0x1f
-#define AHCI_CMD_HDR_PRDT_LEN              16
-
-#define SATA_SIGNATURE_CDROM               0xeb140101
-#define SATA_SIGNATURE_DISK                0x00000101
-
-#define AHCI_GENERIC_HOST_CONTROL_REGS_MAX_ADDR 0x20
-                                            /* Shouldn't this be 0x2c? */
-
-#define AHCI_PORT_REGS_START_ADDR          0x100
-#define AHCI_PORT_ADDR_OFFSET_MASK         0x7f
-#define AHCI_PORT_ADDR_OFFSET_LEN          0x80
-
-#define AHCI_NUM_COMMAND_SLOTS             31
-#define AHCI_SUPPORTED_SPEED               20
-#define AHCI_SUPPORTED_SPEED_GEN1          1
-#define AHCI_VERSION_1_0                   0x10000
-
-#define AHCI_PROGMODE_MAJOR_REV_1          1
-
-#define AHCI_COMMAND_TABLE_ACMD            0x40
-
-#define AHCI_PRDT_SIZE_MASK                0x3fffff
-
-#define IDE_FEATURE_DMA                    1
-
-#define READ_FPDMA_QUEUED                  0x60
-#define WRITE_FPDMA_QUEUED                 0x61
-#define NCQ_NON_DATA                       0x63
-#define RECEIVE_FPDMA_QUEUED               0x65
-#define SEND_FPDMA_QUEUED                  0x64
-
-#define NCQ_FIS_FUA_MASK                   0x80
-#define NCQ_FIS_RARC_MASK                  0x01
-
-#define RES_FIS_DSFIS                      0x00
-#define RES_FIS_PSFIS                      0x20
-#define RES_FIS_RFIS                       0x40
-#define RES_FIS_SDBFIS                     0x58
-#define RES_FIS_UFIS                       0x60
-
-#define SATA_CAP_SIZE           0x8
-#define SATA_CAP_REV            0x2
-#define SATA_CAP_BAR            0x4
-
-typedef struct AHCIPortRegs {
-    uint32_t    lst_addr;
-    uint32_t    lst_addr_hi;
-    uint32_t    fis_addr;
-    uint32_t    fis_addr_hi;
-    uint32_t    irq_stat;
-    uint32_t    irq_mask;
-    uint32_t    cmd;
-    uint32_t    unused0;
-    uint32_t    tfdata;
-    uint32_t    sig;
-    uint32_t    scr_stat;
-    uint32_t    scr_ctl;
-    uint32_t    scr_err;
-    uint32_t    scr_act;
-    uint32_t    cmd_issue;
-    uint32_t    reserved;
-} AHCIPortRegs;
-
-typedef struct AHCICmdHdr {
-    uint16_t    opts;
-    uint16_t    prdtl;
-    uint32_t    status;
-    uint64_t    tbl_addr;
-    uint32_t    reserved[4];
-} QEMU_PACKED AHCICmdHdr;
-
-typedef struct AHCI_SG {
-    uint64_t    addr;
-    uint32_t    reserved;
-    uint32_t    flags_size;
-} QEMU_PACKED AHCI_SG;
-
-typedef struct NCQTransferState {
-    AHCIDevice *drive;
-    BlockAIOCB *aiocb;
-    AHCICmdHdr *cmdh;
-    QEMUSGList sglist;
-    BlockAcctCookie acct;
-    uint32_t sector_count;
-    uint64_t lba;
-    uint8_t tag;
-    uint8_t cmd;
-    uint8_t slot;
-    bool used;
-    bool halt;
-} NCQTransferState;
-
-struct AHCIDevice {
-    IDEDMA dma;
-    IDEBus port;
-    int port_no;
-    uint32_t port_state;
-    uint32_t finished;
-    AHCIPortRegs port_regs;
-    struct AHCIState *hba;
-    QEMUBH *check_bh;
-    uint8_t *lst;
-    uint8_t *res_fis;
-    bool done_atapi_packet;
-    int32_t busy_slot;
-    bool init_d2h_sent;
-    AHCICmdHdr *cur_cmd;
-    NCQTransferState ncq_tfs[AHCI_MAX_CMDS];
-};
-
-struct AHCIPCIState {
-    /*< private >*/
-    PCIDevice parent_obj;
-    /*< public >*/
-
-    AHCIState ahci;
-};
+typedef struct AHCIDevice AHCIDevice;
+
+typedef struct AHCIControlRegs {
+    uint32_t    cap;
+    uint32_t    ghc;
+    uint32_t    irqstatus;
+    uint32_t    impl;
+    uint32_t    version;
+} AHCIControlRegs;
+
+typedef struct AHCIState {
+    DeviceState *container;
+
+    AHCIDevice *dev;
+    AHCIControlRegs control_regs;
+    MemoryRegion mem;
+    MemoryRegion idp;       /* Index-Data Pair I/O port space */
+    unsigned idp_offset;    /* Offset of index in I/O port space */
+    uint32_t idp_index;     /* Current IDP index */
+    int32_t ports;
+    qemu_irq irq;
+    AddressSpace *as;
+} AHCIState;
+
+typedef struct AHCIPCIState AHCIPCIState;
 
 #define TYPE_ICH9_AHCI "ich9-ahci"
 
 #define ICH_AHCI(obj) \
     OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
 
-extern const VMStateDescription vmstate_ahci;
-
-#define VMSTATE_AHCI(_field, _state) {                               \
-    .name       = (stringify(_field)),                               \
-    .size       = sizeof(AHCIState),                                 \
-    .vmsd       = &vmstate_ahci,                                     \
-    .flags      = VMS_STRUCT,                                        \
-    .offset     = vmstate_offset_value(_state, _field, AHCIState),   \
-}
-
-/**
- * NCQFrame is the same as a Register H2D FIS (described in SATA 3.2),
- * but some fields have been re-mapped and re-purposed, as seen in
- * SATA 3.2 section 13.6.4.1 ("READ FPDMA QUEUED")
- *
- * cmd_fis[3], feature 7:0, becomes sector count 7:0.
- * cmd_fis[7], device 7:0, uses bit 7 as the Force Unit Access bit.
- * cmd_fis[11], feature 15:8, becomes sector count 15:8.
- * cmd_fis[12], count 7:0, becomes the NCQ TAG (7:3) and RARC bit (0)
- * cmd_fis[13], count 15:8, becomes the priority value (7:6)
- * bytes 16-19 become an le32 "auxiliary" field.
- */
-typedef struct NCQFrame {
-    uint8_t fis_type;
-    uint8_t c;
-    uint8_t command;
-    uint8_t sector_count_low;  /* (feature 7:0) */
-    uint8_t lba0;
-    uint8_t lba1;
-    uint8_t lba2;
-    uint8_t fua;               /* (device 7:0) */
-    uint8_t lba3;
-    uint8_t lba4;
-    uint8_t lba5;
-    uint8_t sector_count_high; /* (feature 15:8) */
-    uint8_t tag;               /* (count 0:7) */
-    uint8_t prio;              /* (count 15:8) */
-    uint8_t icc;
-    uint8_t control;
-    uint8_t aux0;
-    uint8_t aux1;
-    uint8_t aux2;
-    uint8_t aux3;
-} QEMU_PACKED NCQFrame;
-
-typedef struct SDBFIS {
-    uint8_t type;
-    uint8_t flags;
-    uint8_t status;
-    uint8_t error;
-    uint32_t payload;
-} QEMU_PACKED SDBFIS;
-
-void ahci_realize(AHCIState *s, DeviceState *qdev, AddressSpace *as, int 
ports);
-void ahci_init(AHCIState *s, DeviceState *qdev);
-void ahci_uninit(AHCIState *s);
-
-void ahci_reset(AHCIState *s);
+int32_t ahci_get_num_ports(PCIDevice *dev);
+void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
 
 #define TYPE_SYSBUS_AHCI "sysbus-ahci"
 #define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
 
+typedef struct SysbusAHCIState {
+    /*< private >*/
+    SysBusDevice parent_obj;
+    /*< public >*/
+
+    AHCIState ahci;
+    uint32_t num_ports;
+} SysbusAHCIState;
+
 #define TYPE_ALLWINNER_AHCI "allwinner-ahci"
 #define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
                        TYPE_ALLWINNER_AHCI)
 
+#define ALLWINNER_AHCI_MMIO_OFF  0x80
+#define ALLWINNER_AHCI_MMIO_SIZE 0x80
+
+struct AllwinnerAHCIState {
+    /*< private >*/
+    SysbusAHCIState parent_obj;
+    /*< public >*/
+
+    MemoryRegion mmio;
+    uint32_t regs[ALLWINNER_AHCI_MMIO_SIZE/4];
+};
+
 #endif /* HW_IDE_AHCI_H */
diff --git a/include/hw/ide/ahci_public.h b/include/hw/ide/ahci_public.h
deleted file mode 100644
index 5a06537..0000000
--- a/include/hw/ide/ahci_public.h
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * QEMU AHCI Emulation
- *
- * Copyright (c) 2010 address@hidden
- * Copyright (c) 2010 Roland Elek <address@hidden>
- * Copyright (c) 2010 Sebastian Herbszt <address@hidden>
- * Copyright (c) 2010 Alexander Graf <address@hidden>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#ifndef HW_IDE_AHCI_H
-#define HW_IDE_AHCI_H
-
-#include "hw/sysbus.h"
-
-typedef struct AHCIDevice AHCIDevice;
-
-typedef struct AHCIControlRegs {
-    uint32_t    cap;
-    uint32_t    ghc;
-    uint32_t    irqstatus;
-    uint32_t    impl;
-    uint32_t    version;
-} AHCIControlRegs;
-
-typedef struct AHCIState {
-    DeviceState *container;
-
-    AHCIDevice *dev;
-    AHCIControlRegs control_regs;
-    MemoryRegion mem;
-    MemoryRegion idp;       /* Index-Data Pair I/O port space */
-    unsigned idp_offset;    /* Offset of index in I/O port space */
-    uint32_t idp_index;     /* Current IDP index */
-    int32_t ports;
-    qemu_irq irq;
-    AddressSpace *as;
-} AHCIState;
-
-typedef struct AHCIPCIState AHCIPCIState;
-
-#define TYPE_ICH9_AHCI "ich9-ahci"
-
-#define ICH_AHCI(obj) \
-    OBJECT_CHECK(AHCIPCIState, (obj), TYPE_ICH9_AHCI)
-
-int32_t ahci_get_num_ports(PCIDevice *dev);
-void ahci_ide_create_devs(PCIDevice *dev, DriveInfo **hd);
-
-#define TYPE_SYSBUS_AHCI "sysbus-ahci"
-#define SYSBUS_AHCI(obj) OBJECT_CHECK(SysbusAHCIState, (obj), TYPE_SYSBUS_AHCI)
-
-typedef struct SysbusAHCIState {
-    /*< private >*/
-    SysBusDevice parent_obj;
-    /*< public >*/
-
-    AHCIState ahci;
-    uint32_t num_ports;
-} SysbusAHCIState;
-
-#define TYPE_ALLWINNER_AHCI "allwinner-ahci"
-#define ALLWINNER_AHCI(obj) OBJECT_CHECK(AllwinnerAHCIState, (obj), \
-                       TYPE_ALLWINNER_AHCI)
-
-#define ALLWINNER_AHCI_MMIO_OFF  0x80
-#define ALLWINNER_AHCI_MMIO_SIZE 0x80
-
-struct AllwinnerAHCIState {
-    /*< private >*/
-    SysbusAHCIState parent_obj;
-    /*< public >*/
-
-    MemoryRegion mmio;
-    uint32_t regs[ALLWINNER_AHCI_MMIO_SIZE/4];
-};
-
-#endif /* HW_IDE_AHCI_H */
-- 
2.9.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]