[Qemu-devel] [PULL for-2.9 5/5] configure: split c and cxx extra flags

[Stefan Hajnoczi]

From: Bruno Dominguez <address@hidden>

There was no possibility to add specific cxx flags using the configure
file. So A new entrance has been created to support it.

Duplication of information in configure and rules.mak. Taking
QEMU_CFLAGS and add them to QEMU_CXXFLAGS, now the value of
QEMU_CXXFLAGS is stored in config-host.mak, so there is no need for
it.

The makefile for libvixl was adding flags for QEMU_CXXFLAGS in
QEMU_CFLAGS because of the addition in rules.mak. That was removed, so
adding them where it should be.

Signed-off-by: Bruno Dominguez <address@hidden>
Reviewed-by: Stefan Hajnoczi <address@hidden>
Message-id: address@hidden
Signed-off-by: Stefan Hajnoczi <address@hidden>
---
 configure                   | 74 +++++++++++++++++++++++++--------------------
 disas/libvixl/Makefile.objs |  4 +--
 rules.mak                   |  3 --
 3 files changed, 44 insertions(+), 37 deletions(-)

diff --git a/configure b/configure
index 2203b98..98012ab 100755
--- a/configure
+++ b/configure
@@ -91,7 +91,8 @@ update_cxxflags() {
     # Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
     # options which some versions of GCC's C++ compiler complain about
     # because they only make sense for C programs.
-    QEMU_CXXFLAGS=
+    QEMU_CXXFLAGS="$QEMU_CXXFLAGS -D__STDC_LIMIT_MACROS"
+
     for arg in $QEMU_CFLAGS; do
         case $arg in
             -Wstrict-prototypes|-Wmissing-prototypes|-Wnested-externs|\
@@ -345,6 +346,9 @@ for opt do
   --extra-cflags=*) QEMU_CFLAGS="$QEMU_CFLAGS $optarg"
                     EXTRA_CFLAGS="$optarg"
   ;;
+  --extra-cxxflags=*) QEMU_CXXFLAGS="$QEMU_CXXFLAGS $optarg"
+                      EXTRA_CXXFLAGS="$optarg"
+  ;;
   --extra-ldflags=*) LDFLAGS="$LDFLAGS $optarg"
                      EXTRA_LDFLAGS="$optarg"
   ;;
@@ -788,6 +792,8 @@ for opt do
   ;;
   --extra-cflags=*)
   ;;
+  --extra-cxxflags=*)
+  ;;
   --extra-ldflags=*)
   ;;
   --enable-debug-info)
@@ -1305,6 +1311,7 @@ Advanced options (experts only):
   --cxx=CXX                use C++ compiler CXX [$cxx]
   --objcc=OBJCC            use Objective-C compiler OBJCC [$objcc]
   --extra-cflags=CFLAGS    append extra C compiler flags QEMU_CFLAGS
+  --extra-cxxflags=CXXFLAGS append extra C++ compiler flags QEMU_CXXFLAGS
   --extra-ldflags=LDFLAGS  append extra linker flags LDFLAGS
   --make=MAKE              use specified make [$make]
   --install=INSTALL        use specified install [$install]
@@ -1490,37 +1497,6 @@ if test "$bogus_os" = "yes"; then
     error_exit "Unrecognized host OS $targetos"
 fi
 
-# Check that the C++ compiler exists and works with the C compiler
-if has $cxx; then
-    cat > $TMPC <<EOF
-int c_function(void);
-int main(void) { return c_function(); }
-EOF
-
-    compile_object
-
-    cat > $TMPCXX <<EOF
-extern "C" {
-   int c_function(void);
-}
-int c_function(void) { return 42; }
-EOF
-
-    update_cxxflags
-
-    if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
-        # C++ compiler $cxx works ok with C compiler $cc
-        :
-    else
-        echo "C++ compiler $cxx does not work with C compiler $cc"
-        echo "Disabling C++ specific optional code"
-        cxx=
-    fi
-else
-    echo "No C++ compiler available; disabling C++ specific optional code"
-    cxx=
-fi
-
 gcc_flags="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
 gcc_flags="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers 
$gcc_flags"
 gcc_flags="-Wno-missing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
@@ -5064,6 +5040,38 @@ EOF
   fi
 fi
 
+# Check that the C++ compiler exists and works with the C compiler.
+# All the QEMU_CXXFLAGS are based on QEMU_CFLAGS. Keep this at the end to 
don't miss any other that could be added.
+if has $cxx; then
+    cat > $TMPC <<EOF
+int c_function(void);
+int main(void) { return c_function(); }
+EOF
+
+    compile_object
+
+    cat > $TMPCXX <<EOF
+extern "C" {
+   int c_function(void);
+}
+int c_function(void) { return 42; }
+EOF
+
+    update_cxxflags
+
+    if do_cxx $QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
+        # C++ compiler $cxx works ok with C compiler $cc
+        :
+    else
+        echo "C++ compiler $cxx does not work with C compiler $cc"
+        echo "Disabling C++ specific optional code"
+        cxx=
+    fi
+else
+    echo "No C++ compiler available; disabling C++ specific optional code"
+    cxx=
+fi
+
 echo_version() {
     if test "$1" = "yes" ; then
         echo "($2)"
@@ -5269,6 +5277,7 @@ if test "$mingw32" = "no" ; then
 fi
 echo "qemu_helperdir=$libexecdir" >> $config_host_mak
 echo "extra_cflags=$EXTRA_CFLAGS" >> $config_host_mak
+echo "extra_cxxflags=$EXTRA_CXXFLAGS" >> $config_host_mak
 echo "extra_ldflags=$EXTRA_LDFLAGS" >> $config_host_mak
 echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
 echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
@@ -5911,6 +5920,7 @@ echo "WINDRES=$windres" >> $config_host_mak
 echo "CFLAGS=$CFLAGS" >> $config_host_mak
 echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
+echo "QEMU_CXXFLAGS=$QEMU_CXXFLAGS" >> $config_host_mak
 echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
 if test "$sparse" = "yes" ; then
   echo "CC           := REAL_CC=\"\$(CC)\" cgcc"       >> $config_host_mak
diff --git a/disas/libvixl/Makefile.objs b/disas/libvixl/Makefile.objs
index 860fb7f..27183b7 100644
--- a/disas/libvixl/Makefile.objs
+++ b/disas/libvixl/Makefile.objs
@@ -6,9 +6,9 @@ libvixl_OBJS = vixl/utils.o \
 
 # The -Wno-sign-compare is needed only for gcc 4.6, which complains about
 # some signed-unsigned equality comparisons which later gcc versions do not.
-$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS := 
-I$(SRC_PATH)/disas/libvixl $(QEMU_CFLAGS) -Wno-sign-compare
+$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CXXFLAGS := 
-I$(SRC_PATH)/disas/libvixl $(QEMU_CXXFLAGS) -Wno-sign-compare
 # Ensure that C99 macros are defined regardless of the inclusion order of
 # headers in vixl. This is required at least on NetBSD.
-$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CFLAGS += -D__STDC_CONSTANT_MACROS 
-D__STDC_LIMIT_MACROS -D__STDC_FORMAT_MACROS
+$(addprefix $(obj)/,$(libvixl_OBJS)): QEMU_CXXFLAGS += 
-D__STDC_CONSTANT_MACROS -D__STDC_FORMAT_MACROS
 
 common-obj-$(CONFIG_ARM_A64_DIS) += $(libvixl_OBJS)
diff --git a/rules.mak b/rules.mak
index 1c0eabb..2a2fb72 100644
--- a/rules.mak
+++ b/rules.mak
@@ -20,9 +20,6 @@ MAKEFLAGS += -rR
 %.mak:
 clean-target:
 
-# Flags for C++ compilation
-QEMU_CXXFLAGS = -D__STDC_LIMIT_MACROS $(filter-out -Wstrict-prototypes 
-Wmissing-prototypes -Wnested-externs -Wold-style-declaration 
-Wold-style-definition -Wredundant-decls, $(QEMU_CFLAGS))
-
 # Flags for dependency generation
 QEMU_DGFLAGS += -MMD -MP -MT $@ -MF $(@D)/$(*F).d
 
-- 
2.9.4