qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH] hw/s390x/ipl: Fix crash with virtio-scsi-pci de


From: Cornelia Huck
Subject: Re: [Qemu-devel] [PATCH] hw/s390x/ipl: Fix crash with virtio-scsi-pci device
Date: Wed, 26 Apr 2017 12:34:27 +0200

On Tue, 25 Apr 2017 15:18:47 +0200
Thomas Huth <address@hidden> wrote:

> qemu-system-s390x currently crashes when it is started with a
> virtio-scsi-pci device, e.g.:
> 
>  qemu-system-s390x -nographic -enable-kvm -device virtio-scsi-pci \
>                    -drive file=/tmp/disk.dat,if=none,id=d1,format=raw \
>                    -device scsi-cd,drive=d1,bootindex=1
> 
> The problem is that the code in s390_gen_initial_iplb() currently assumes
> that all SCSI devices are also CCW devices, which is not the case for
> virtio-scsi-pci of course. Fix it by adding an appropriate check for
> TYPE_CCW_DEVICE here.
> 
> Signed-off-by: Thomas Huth <address@hidden>
> ---
>  hw/s390x/ipl.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/s390x/ipl.c b/hw/s390x/ipl.c
> index 7978c7d..f674d50 100644
> --- a/hw/s390x/ipl.c
> +++ b/hw/s390x/ipl.c
> @@ -248,7 +248,13 @@ static bool s390_gen_initial_iplb(S390IPLState *ipl)
>              SCSIBus *bus = scsi_bus_from_device(sd);
>              VirtIOSCSI *vdev = container_of(bus, VirtIOSCSI, bus);
>              VirtIOSCSICcw *scsi_ccw = container_of(vdev, VirtIOSCSICcw, 
> vdev);
> -            CcwDevice *ccw_dev = CCW_DEVICE(scsi_ccw);
> +            CcwDevice *ccw_dev;
> +
> +            ccw_dev = (CcwDevice *)object_dynamic_cast(OBJECT(scsi_ccw),
> +                                                       TYPE_CCW_DEVICE);
> +            if (!ccw_dev) {       /* It might be a PCI device instead */
> +                return false;
> +            }
> 
>              ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_QEMU_SCSI_LEN);
>              ipl->iplb.blk0_len =

This patch made me look at what we do if we have a non-ccw virtio-net
device for ipl. We'll set ->netboot (which implies that we load the
netboot fw later), but leave the iplb as invalid (so setting the start
address in the iplb won't have any effect as we ignore an invalid iplb
later on). The s390-ccw bios cannot deal with non-ccw boot devices
anyway.

In the end, it's just a bit odd, but no harm is done.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]