Re: [Qemu-devel] [RFC] Proposed qcow2 extension: subcluster allocation

[Stefan Hajnoczi]

On Thu, Apr 06, 2017 at 06:01:48PM +0300, Alberto Garcia wrote:
> Here are the results (subcluster size in brackets):
> 
> |-----------------+----------------+-----------------+-------------------|
> |  cluster size   | subclusters=on | subclusters=off | Max L2 cache size |
> |-----------------+----------------+-----------------+-------------------|
> |   2 MB (256 KB) |   440 IOPS     |  100 IOPS       | 160 KB (*)        |
> | 512 KB  (64 KB) |  1000 IOPS     |  300 IOPS       | 640 KB            |
> |  64 KB   (8 KB) |  3000 IOPS     | 1000 IOPS       |   5 MB            |
> |  32 KB   (4 KB) | 12000 IOPS     | 1300 IOPS       |  10 MB            |
> |   4 KB  (512 B) |   100 IOPS     |  100 IOPS       |  80 MB            |
> |-----------------+----------------+-----------------+-------------------|
> 
>                 (*) The L2 cache must be a multiple of the cluster
>                     size, so in this case it must be 2MB. On the table
>                     I chose to show how much of those 2MB are actually
>                     used so you can compare it with the other cases.
> 
> Some comments about the results:
> 
> - For the 64KB, 512KB and 2MB cases, having subclusters increases
>   write performance roughly by three. This happens because for each
>   cluster allocation there's less data to copy from the backing
>   image. For the same reason, the smaller the cluster, the better the
>   performance. As expected, 64KB clusters with no subclusters perform
>   roughly the same as 512KB clusters with 64KB subclusters.
> 
> - The 32KB case is the most interesting one. Without subclusters it's
>   not very different from the 64KB case, but having a subcluster with
>   the same size of the I/O block eliminates the need for COW entirely
>   and the performance skyrockets (10 times faster!).
> 
> - 4KB is however very slow. I attribute this to the fact that the
>   cluster size is so small that a new cluster needs to be allocated
>   for every single write and its refcount updated accordingly. The L2
>   and refcount tables are also so small that they are too inefficient
>   and need to grow all the time.
> 
> Here are the results when writing to an empty 40GB qcow2 image with no
> backing file. The numbers are of course different but as you can see
> the patterns are similar:
> 
> |-----------------+----------------+-----------------+-------------------|
> |  cluster size   | subclusters=on | subclusters=off | Max L2 cache size |
> |-----------------+----------------+-----------------+-------------------|
> |   2 MB (256 KB) |  1200 IOPS     |  255 IOPS       | 160 KB            |
> | 512 KB  (64 KB) |  3000 IOPS     |  700 IOPS       | 640 KB            |
> |  64 KB   (8 KB) |  7200 IOPS     | 3300 IOPS       |   5 MB            |
> |  32 KB   (4 KB) | 12300 IOPS     | 4200 IOPS       |  10 MB            |
> |   4 KB  (512 B) |   100 IOPS     |  100 IOPS       |  80 MB            |
> |-----------------+----------------+-----------------+-------------------|

I don't understand why subclusters=on performs so much better when
there's no backing file.  Is qcow2 zeroing out the 64 KB cluster with
subclusters=off?

It ought to just write the 4 KB data when a new cluster is touched.
Therefore the performance should be very similar to subclusters=on.

Stefan

signature.asc
Description: PGP signature