[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.0.101-80-default (address@hidden) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Fri Jul 15 14:30:41 UTC 2016 (eb2ba81) [ 0.000000] Command line: root=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part7 instmode=cd resume=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 splash=silent nmi_watchdog=0 audit=1 vga=0x318 address@hidden tsc=reliable elevator=noop [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffdf000 (usable) [ 0.000000] BIOS-e820: 000000007ffdf000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000b0000000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved) [ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000380000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.8 present. [ 0.000000] DMI: FUJITSU PRIMERGY RX300 S8/D2939-B1, BIOS V4.6.5.4 R1.14.0 for D2939-B1x 10/13/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x380000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 00C0000000 mask FFC0000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] last_pfn = 0x7ffdf max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f6af0] f6af0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ffdf000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ffdf000 page 4k [ 0.000000] kernel direct mapping tables up to 0x7ffdefff @ [mem 0x1fffc000-0x1fffffff] [ 0.000000] init_memory_mapping: 0000000100000000-0000000380000000 [ 0.000000] 0100000000 - 0380000000 page 2M [ 0.000000] kernel direct mapping tables up to 0x37fffffff @ [mem 0x7ffd4000-0x7ffdefff] [ 0.000000] nmi ring buffer: 262144 [ 0.000000] RAMDISK: 37a3d000 - 37ff0000 [ 0.000000] Reserving 128MB of memory at 64MB for crashkernel (System RAM: 14336MB) [ 0.000000] ACPI: RSDP 00000000000f6aa0 00014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 000000007ffe1f09 00034 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 000000007ffe1da1 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 000000007ffdfc00 021A1 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 000000007ffdfbc0 00040 [ 0.000000] ACPI: APIC 000000007ffe1e15 00080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 000000007ffe1e95 00038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: MCFG 000000007ffe1ecd 0003C (v01 BOCHS BXPCMCFG 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000380000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000380000000 [ 0.000000] NODE_DATA [000000037ff99000 - 000000037ffbffff] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1bef801, boot clock [ 0.000000] [ffffea0000000000-ffffea000c3fffff] PMD -> [ffff880373600000-ffff88037ddfffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00380000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ffdf [ 0.000000] 0: 0x00100000 -> 0x00380000 [ 0.000000] On node 0 totalpages: 3145582 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3922 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 505879 pages, LIFO batch:31 [ 0.000000] Normal zone: 35840 pages used for memmap [ 0.000000] Normal zone: 2585600 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007ffdf000 - 0000000080000000 [ 0.000000] PM: Registered nosave memory: 0000000080000000 - 00000000b0000000 [ 0.000000] PM: Registered nosave memory: 00000000b0000000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feffc000 [ 0.000000] PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000 [ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000 [ 0.000000] PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ed1c000) [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages/cpu @ffff88037fc00000 s71680 r8192 d22528 u1048576 [ 0.000000] pcpu-alloc: s71680 r8192 d22528 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] kvm-clock: cpu 0, msr 3:7fc10801, primary cpu clock [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3095401 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part7 instmode=cd resume=/dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 splash=silent nmi_watchdog=0 audit=1 vga=0x318 address@hidden tsc=reliable elevator=noop [ 0.000000] bootsplash: silent mode. [ 0.000000] audit: enabled (after initialization) [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Memory: 12190096k/14680064k available (4566k kernel code, 2097736k absent, 392232k reserved, 7581k data, 1360k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:262400 nr_irqs:512 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 100663296 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Detected 2593.990 MHz processor. [ 0.008000] Calibrating delay loop (skipped) preset value.. 5187.98 BogoMIPS (lpj=10375960) [ 0.008000] pid_max: default: 32768 minimum: 301 [ 0.008000] kdb version 4.4 by Keith Owens, Scott Lurndal. Copyright SGI, All Rights Reserved [ 0.008000] Security Framework initialized [ 0.008000] AppArmor: AppArmor initialized [ 0.008000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.008465] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.009761] Mount-cache hash table entries: 256 [ 0.009837] Initializing cgroup subsys cpuacct [ 0.009839] Initializing cgroup subsys memory [ 0.009847] Initializing cgroup subsys devices [ 0.009849] Initializing cgroup subsys freezer [ 0.009850] Initializing cgroup subsys net_cls [ 0.009852] Initializing cgroup subsys blkio [ 0.009855] Initializing cgroup subsys perf_event [ 0.009914] mce: CPU supports 10 MCE banks [ 0.011421] ACPI: Core revision 20110413 [ 0.012406] Enabling x2apic [ 0.012412] Enabled x2apic [ 0.012576] Switched APIC routing to physical x2apic. [ 0.013319] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.013321] CPU0: Intel QEMU Virtual CPU version 2.5+ stepping 03 [ 0.016000] Performance Events: Broken PMU hardware detected, using software events only. [ 0.016000] Failed to access perfctr msr (MSR c1 is 0) [ 0.016000] Booting Node 0, Processors #1 Ok. [ 0.024008] kvm-clock: cpu 1, msr 3:7fd10801, secondary cpu clock [ 0.024016] Brought up 2 CPUs [ 0.024019] Total of 2 processors activated (10375.96 BogoMIPS). [ 0.024014] KVM setup async PF for cpu 1 [ 0.024298] devtmpfs: initialized [ 0.029725] print_constraints: dummy: [ 0.029725] Time: 11:10:12 Date: 12/21/16 [ 0.029725] NET: Registered protocol family 16 [ 0.029725] ACPI: bus type pci registered [ 0.029725] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xb0000000-0xbfffffff] (base 0xb0000000) [ 0.029725] PCI: MMCONFIG at [mem 0xb0000000-0xbfffffff] reserved in E820 [ 0.029870] PCI: Using configuration type 1 for base access [ 0.032099] bio: create slab at 0 [ 0.032508] ACPI: EC: Look up EC in DSDT [ 0.034762] ACPI: Interpreter enabled [ 0.034766] ACPI: (supports S0 S3 S4 S5) [ 0.034779] ACPI: Using IOAPIC for interrupt routing [ 0.037021] ACPI: No dock devices found. [ 0.037025] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.037082] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.037112] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.037114] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.037116] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.037118] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.037148] pci 0000:00:00.0: [8086:29c0] type 0 class 0x000600 [ 0.037354] pci 0000:00:01.0: [8086:3420] type 1 class 0x000604 [ 0.044292] pci 0000:00:02.0: [8086:3420] type 1 class 0x000604 [ 0.053551] pci 0000:00:03.0: [8086:3420] type 1 class 0x000604 [ 0.062069] pci 0000:00:04.0: [8086:100f] type 0 class 0x000200 [ 0.064026] pci 0000:00:04.0: reg 10: [mem 0xfe980000-0xfe99ffff] [ 0.068029] pci 0000:00:04.0: reg 14: [io 0xb100-0xb13f] [ 0.094132] pci 0000:00:04.0: reg 30: [mem 0xfe800000-0xfe83ffff pref] [ 0.096084] pci 0000:00:05.0: [8086:3420] type 1 class 0x000604 [ 0.106446] pci 0000:00:06.0: [1000:0079] type 0 class 0x000104 [ 0.108026] pci 0000:00:06.0: reg 10: [io 0xb000-0xb0ff] [ 0.116050] pci 0000:00:06.0: reg 14: [mem 0xfea30000-0xfea33fff 64bit] [ 0.123417] pci 0000:00:06.0: reg 1c: [mem 0xfe840000-0xfe87ffff 64bit] [ 0.140312] pci 0000:00:0b.0: [1af4:1050] type 0 class 0x000300 [ 0.144030] pci 0000:00:0b.0: reg 10: [mem 0xfa800000-0xfaffffff pref] [ 0.157862] pci 0000:00:0b.0: reg 18: [mem 0xfb000000-0xfb7fffff 64bit pref] [ 0.164034] pci 0000:00:0b.0: reg 20: [mem 0xfea34000-0xfea34fff] [ 0.176037] pci 0000:00:0b.0: reg 30: [mem 0xfea20000-0xfea2ffff pref] [ 0.180358] pci 0000:00:10.0: [8086:100f] type 0 class 0x000200 [ 0.185686] pci 0000:00:10.0: reg 10: [mem 0xfe9a0000-0xfe9bffff] [ 0.188031] pci 0000:00:10.0: reg 14: [io 0xb140-0xb17f] [ 0.212037] pci 0000:00:10.0: reg 30: [mem 0xfe880000-0xfe8bffff pref] [ 0.214177] pci 0000:00:11.0: [8086:100f] type 0 class 0x000200 [ 0.216034] pci 0000:00:11.0: reg 10: [mem 0xfe9c0000-0xfe9dffff] [ 0.221781] pci 0000:00:11.0: reg 14: [io 0xb180-0xb1bf] [ 0.246338] pci 0000:00:11.0: reg 30: [mem 0xfe8c0000-0xfe8fffff pref] [ 0.252580] pci 0000:00:12.0: [8086:100f] type 0 class 0x000200 [ 0.256048] pci 0000:00:12.0: reg 10: [mem 0xfe9e0000-0xfe9fffff] [ 0.265462] pci 0000:00:12.0: reg 14: [io 0xb1c0-0xb1ff] [ 0.289423] pci 0000:00:12.0: reg 30: [mem 0xfe900000-0xfe93ffff pref] [ 0.292084] pci 0000:00:13.0: [8086:100f] type 0 class 0x000200 [ 0.294136] pci 0000:00:13.0: reg 10: [mem 0xfea00000-0xfea1ffff] [ 0.297957] pci 0000:00:13.0: reg 14: [io 0xb200-0xb23f] [ 0.322076] pci 0000:00:13.0: reg 30: [mem 0xfe940000-0xfe97ffff pref] [ 0.324137] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 0.332157] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601 [ 0.332442] pci 0000:00:1f.2: [8086:2922] type 0 class 0x000106 [ 0.354133] pci 0000:00:1f.2: reg 20: [io 0xb280-0xb29f] [ 0.358005] pci 0000:00:1f.2: reg 24: [mem 0xfea35000-0xfea35fff] [ 0.365807] pci 0000:00:1f.3: [8086:2930] type 0 class 0x000c05 [ 0.376043] pci 0000:00:1f.3: reg 20: [io 0x0700-0x073f] [ 0.384176] pci 0000:01:00.0: [1af4:1004] type 0 class 0x000100 [ 0.386060] pci 0000:01:00.0: reg 10: [io 0xa000-0xa03f] [ 0.391544] pci 0000:01:00.0: reg 14: [mem 0xfe600000-0xfe600fff] [ 0.416186] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.416213] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.416223] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.416241] pci 0000:00:01.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.419044] pci 0000:02:00.0: [1000:0012] type 0 class 0x000100 [ 0.420052] pci 0000:02:00.0: reg 10: [io 0x9000-0x90ff] [ 0.430007] pci 0000:02:00.0: reg 14: [mem 0xfe402000-0xfe4023ff] [ 0.436053] pci 0000:02:00.0: reg 18: [mem 0xfe400000-0xfe401fff] [ 0.468093] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.468107] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff] [ 0.468116] pci 0000:00:02.0: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.468133] pci 0000:00:02.0: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.472178] pci 0000:03:00.0: [1af4:1003] type 0 class 0x000780 [ 0.474328] pci 0000:03:00.0: reg 10: [io 0x8000-0x801f] [ 0.477960] pci 0000:03:00.0: reg 14: [mem 0xfe200000-0xfe200fff] [ 0.504169] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.504183] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff] [ 0.504192] pci 0000:00:03.0: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.504209] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.506344] pci 0000:04:00.0: [1af4:1002] type 0 class 0x0000ff [ 0.508033] pci 0000:04:00.0: reg 10: [io 0x7000-0x701f] [ 0.523862] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 0.523878] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff] [ 0.523889] pci 0000:00:05.0: bridge window [mem 0xfe000000-0xfe1fffff] [ 0.523908] pci 0000:00:05.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.528182] pci 0000:05:00.0: [1b36:0001] type 1 class 0x000604 [ 0.530682] pci 0000:05:00.0: reg 10: [mem 0xfde00000-0xfde000ff 64bit] [ 0.537733] pci 0000:05:01.0: [1b36:0001] type 1 class 0x000604 [ 0.540075] pci 0000:05:01.0: reg 10: [mem 0xfde01000-0xfde010ff 64bit] [ 0.548319] pci 0000:05:02.0: [1b36:0001] type 1 class 0x000604 [ 0.551890] pci 0000:05:02.0: reg 10: [mem 0xfde02000-0xfde020ff 64bit] [ 0.556321] pci 0000:05:03.0: [1b36:0001] type 1 class 0x000604 [ 0.560075] pci 0000:05:03.0: reg 10: [mem 0xfde03000-0xfde030ff 64bit] [ 0.568281] pci 0000:05:04.0: [1b36:0001] type 1 class 0x000604 [ 0.570183] pci 0000:05:04.0: reg 10: [mem 0xfde04000-0xfde040ff 64bit] [ 0.577590] pci 0000:05:05.0: [1b36:0001] type 1 class 0x000604 [ 0.579812] pci 0000:05:05.0: reg 10: [mem 0xfde05000-0xfde050ff 64bit] [ 0.584355] pci 0000:00:1e.0: PCI bridge to [bus 05-0b] (subtractive decode) [ 0.584368] pci 0000:00:1e.0: bridge window [io 0x1000-0x6fff] [ 0.584377] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfdffffff] [ 0.584394] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfc3fffff 64bit pref] [ 0.584396] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.584397] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.584399] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.584400] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.585720] pci 0000:05:00.0: PCI bridge to [bus 06-06] [ 0.585731] pci 0000:05:00.0: bridge window [io 0x6000-0x6fff] [ 0.585740] pci 0000:05:00.0: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.585764] pci 0000:05:00.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.590832] pci 0000:05:01.0: PCI bridge to [bus 07-07] [ 0.590844] pci 0000:05:01.0: bridge window [io 0x5000-0x5fff] [ 0.590853] pci 0000:05:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.590870] pci 0000:05:01.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.593201] pci 0000:08:01.0: [8086:100f] type 0 class 0x000200 [ 0.595130] pci 0000:08:01.0: reg 10: [mem 0xfd840000-0xfd85ffff] [ 0.598008] pci 0000:08:01.0: reg 14: [io 0x4000-0x403f] [ 0.624064] pci 0000:08:01.0: reg 30: [mem 0xfd800000-0xfd83ffff pref] [ 0.626125] pci 0000:05:02.0: PCI bridge to [bus 08-08] [ 0.626138] pci 0000:05:02.0: bridge window [io 0x4000-0x4fff] [ 0.626164] pci 0000:05:02.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.626183] pci 0000:05:02.0: bridge window [mem 0xfbe00000-0xfbffffff 64bit pref] [ 0.628330] pci 0000:05:03.0: PCI bridge to [bus 09-09] [ 0.628342] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff] [ 0.628352] pci 0000:05:03.0: bridge window [mem 0xfd600000-0xfd7fffff] [ 0.628370] pci 0000:05:03.0: bridge window [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.632310] pci 0000:0a:01.0: [8086:100f] type 0 class 0x000200 [ 0.634256] pci 0000:0a:01.0: reg 10: [mem 0xfd440000-0xfd45ffff] [ 0.637899] pci 0000:0a:01.0: reg 14: [io 0x2000-0x203f] [ 0.664070] pci 0000:0a:01.0: reg 30: [mem 0xfd400000-0xfd43ffff pref] [ 0.669690] pci 0000:05:04.0: PCI bridge to [bus 0a-0a] [ 0.669706] pci 0000:05:04.0: bridge window [io 0x2000-0x2fff] [ 0.669718] pci 0000:05:04.0: bridge window [mem 0xfd400000-0xfd5fffff] [ 0.669738] pci 0000:05:04.0: bridge window [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.672248] pci 0000:0b:01.0: [8086:100f] type 0 class 0x000200 [ 0.674690] pci 0000:0b:01.0: reg 10: [mem 0xfd240000-0xfd25ffff] [ 0.680063] pci 0000:0b:01.0: reg 14: [io 0x1000-0x103f] [ 0.708054] pci 0000:0b:01.0: reg 30: [mem 0xfd200000-0xfd23ffff pref] [ 0.710569] pci 0000:05:05.0: PCI bridge to [bus 0b-0b] [ 0.710583] pci 0000:05:05.0: bridge window [io 0x1000-0x1fff] [ 0.710593] pci 0000:05:05.0: bridge window [mem 0xfd200000-0xfd3fffff] [ 0.710612] pci 0000:05:05.0: bridge window [mem 0xfb800000-0xfb9fffff 64bit pref] [ 0.742533] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.744178] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.744265] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.747392] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.747510] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.747595] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.747695] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.747783] ACPI: PCI Interrupt Link [LNKE] (IRQs 5 *10 11) [ 0.747874] ACPI: PCI Interrupt Link [LNKF] (IRQs 5 *10 11) [ 0.747954] ACPI: PCI Interrupt Link [LNKG] (IRQs 5 10 *11) [ 0.748065] ACPI: PCI Interrupt Link [LNKH] (IRQs 5 10 *11) [ 0.748125] ACPI: PCI Interrupt Link [GSIA] (IRQs *16) [ 0.748144] ACPI: PCI Interrupt Link [GSIB] (IRQs *17) [ 0.748155] ACPI: PCI Interrupt Link [GSIC] (IRQs *18) [ 0.748184] ACPI: PCI Interrupt Link [GSID] (IRQs *19) [ 0.748202] ACPI: PCI Interrupt Link [GSIE] (IRQs *20) [ 0.748212] ACPI: PCI Interrupt Link [GSIF] (IRQs *21) [ 0.748226] ACPI: PCI Interrupt Link [GSIG] (IRQs *22) [ 0.748236] ACPI: PCI Interrupt Link [GSIH] (IRQs *23) [ 0.748344] vgaarb: device added: PCI:0000:00:0b.0,decodes=io+mem,owns=io+mem,locks=none [ 0.748353] vgaarb: loaded [ 0.748486] PCI: Using ACPI for IRQ routing [ 0.788738] PCI: pci_cache_line_size set to 64 bytes [ 0.788997] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 0.788999] reserve RAM buffer: 000000007ffdf000 - 000000007fffffff [ 0.789064] NetLabel: Initializing [ 0.789066] NetLabel: domain hash size = 128 [ 0.789067] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.789074] NetLabel: unlabeled traffic allowed by default [ 0.789091] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.789101] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.789105] hpet0: 3 comparators, 64-bit 100.000000 MHz counter [ 0.792064] Switching to clocksource kvm-clock [ 0.792861] AppArmor: AppArmor Filesystem Enabled [ 0.792877] pnp: PnP ACPI init [ 0.792886] ACPI: bus type pnp registered [ 0.792904] pnp 00:00: [bus 00-ff] [ 0.792905] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.792907] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.792908] pnp 00:00: [io 0x0d00-0xffff window] [ 0.792909] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.792910] pnp 00:00: [mem 0xc0000000-0xfebfffff window] [ 0.792939] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.792946] pnp 00:01: [io 0x0070-0x0071] [ 0.792967] pnp 00:01: [irq 8] [ 0.792968] pnp 00:01: [io 0x0072-0x0077] [ 0.792983] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.792999] pnp 00:02: [io 0x0060] [ 0.793000] pnp 00:02: [io 0x0064] [ 0.793010] pnp 00:02: [irq 1] [ 0.793025] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.793044] pnp 00:03: [irq 12] [ 0.793057] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.793107] pnp 00:04: [io 0x03f8-0x03ff] [ 0.793129] pnp 00:04: [irq 4] [ 0.793144] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.793175] pnp 00:05: [io 0x0620-0x062f] [ 0.793188] pnp 00:05: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.793195] pnp 00:06: [io 0x0cd8-0x0cf7] [ 0.793207] pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active) [ 0.793258] pnp 00:07: [mem 0xfed00000-0xfed003ff] [ 0.793274] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.793405] pnp: PnP ACPI: found 8 devices [ 0.793407] ACPI: ACPI bus type pnp unregistered [ 0.798596] PCI: max bus depth: 2 pci_try_num: 3 [ 0.830503] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.830516] pci 0000:00:01.0: bridge window [io 0xa000-0xafff] [ 0.834909] pci 0000:00:01.0: bridge window [mem 0xfe600000-0xfe7fffff] [ 0.838155] pci 0000:00:01.0: bridge window [mem 0xfca00000-0xfcbfffff 64bit pref] [ 0.844453] pci 0000:00:02.0: PCI bridge to [bus 02-02] [ 0.844466] pci 0000:00:02.0: bridge window [io 0x9000-0x9fff] [ 0.847820] pci 0000:00:02.0: bridge window [mem 0xfe400000-0xfe5fffff] [ 0.850032] pci 0000:00:02.0: bridge window [mem 0xfc800000-0xfc9fffff 64bit pref] [ 0.855521] pci 0000:00:03.0: PCI bridge to [bus 03-03] [ 0.855535] pci 0000:00:03.0: bridge window [io 0x8000-0x8fff] [ 0.858729] pci 0000:00:03.0: bridge window [mem 0xfe200000-0xfe3fffff] [ 0.861119] pci 0000:00:03.0: bridge window [mem 0xfc600000-0xfc7fffff 64bit pref] [ 0.866598] pci 0000:00:05.0: PCI bridge to [bus 04-04] [ 0.868770] pci 0000:00:05.0: bridge window [io 0x7000-0x7fff] [ 0.872222] pci 0000:00:05.0: bridge window [mem 0xfe000000-0xfe1fffff] [ 0.874420] pci 0000:00:05.0: bridge window [mem 0xfc400000-0xfc5fffff 64bit pref] [ 0.878957] pci 0000:05:00.0: PCI bridge to [bus 06-06] [ 0.880159] pci 0000:05:00.0: bridge window [io 0x6000-0x6fff] [ 0.883457] pci 0000:05:00.0: bridge window [mem 0xfdc00000-0xfddfffff] [ 0.885602] pci 0000:05:00.0: bridge window [mem 0xfc200000-0xfc3fffff 64bit pref] [ 0.889921] pci 0000:05:01.0: PCI bridge to [bus 07-07] [ 0.889932] pci 0000:05:01.0: bridge window [io 0x5000-0x5fff] [ 0.894641] pci 0000:05:01.0: bridge window [mem 0xfda00000-0xfdbfffff] [ 0.896820] pci 0000:05:01.0: bridge window [mem 0xfc000000-0xfc1fffff 64bit pref] [ 0.901200] pci 0000:05:02.0: PCI bridge to [bus 08-08] [ 0.902238] pci 0000:05:02.0: bridge window [io 0x4000-0x4fff] [ 0.905483] pci 0000:05:02.0: bridge window [mem 0xfd800000-0xfd9fffff] [ 0.907563] pci 0000:05:02.0: bridge window [mem 0xfbe00000-0xfbffffff 64bit pref] [ 0.911984] pci 0000:05:03.0: PCI bridge to [bus 09-09] [ 0.912094] pci 0000:05:03.0: bridge window [io 0x3000-0x3fff] [ 0.915520] pci 0000:05:03.0: bridge window [mem 0xfd600000-0xfd7fffff] [ 0.918135] pci 0000:05:03.0: bridge window [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 0.924476] pci 0000:05:04.0: PCI bridge to [bus 0a-0a] [ 0.925505] pci 0000:05:04.0: bridge window [io 0x2000-0x2fff] [ 0.929230] pci 0000:05:04.0: bridge window [mem 0xfd400000-0xfd5fffff] [ 0.931443] pci 0000:05:04.0: bridge window [mem 0xfba00000-0xfbbfffff 64bit pref] [ 0.935712] pci 0000:05:05.0: PCI bridge to [bus 0b-0b] [ 0.935725] pci 0000:05:05.0: bridge window [io 0x1000-0x1fff] [ 0.939153] pci 0000:05:05.0: bridge window [mem 0xfd200000-0xfd3fffff] [ 0.943067] pci 0000:05:05.0: bridge window [mem 0xfb800000-0xfb9fffff 64bit pref] [ 0.947390] pci 0000:00:1e.0: PCI bridge to [bus 05-0b] [ 0.947403] pci 0000:00:1e.0: bridge window [io 0x1000-0x6fff] [ 0.950524] pci 0000:00:1e.0: bridge window [mem 0xfd200000-0xfdffffff] [ 0.952767] pci 0000:00:1e.0: bridge window [mem 0xfb800000-0xfc3fffff 64bit pref] [ 0.962573] pci 0000:00:01.0: setting latency timer to 64 [ 0.965259] pci 0000:00:02.0: setting latency timer to 64 [ 0.968218] pci 0000:00:03.0: setting latency timer to 64 [ 0.972594] pci 0000:00:05.0: setting latency timer to 64 [ 0.976335] pci 0000:00:1e.0: setting latency timer to 64 [ 0.976375] ACPI: PCI Interrupt Link [GSIE] enabled at IRQ 20 [ 0.976402] pci 0000:05:00.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20 [ 0.979964] pci 0000:05:00.0: setting latency timer to 64 [ 0.979991] ACPI: PCI Interrupt Link [GSIF] enabled at IRQ 21 [ 0.980024] pci 0000:05:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21 [ 0.985441] pci 0000:05:01.0: setting latency timer to 64 [ 0.985685] ACPI: PCI Interrupt Link [GSIG] enabled at IRQ 22 [ 0.985704] pci 0000:05:02.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22 [ 0.989866] pci 0000:05:02.0: setting latency timer to 64 [ 0.989891] ACPI: PCI Interrupt Link [GSIH] enabled at IRQ 23 [ 0.989909] pci 0000:05:03.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23 [ 0.994178] pci 0000:05:03.0: setting latency timer to 64 [ 0.994193] pci 0000:05:04.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20 [ 0.999002] pci 0000:05:04.0: setting latency timer to 64 [ 1.000885] pci 0000:05:05.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21 [ 1.007087] pci 0000:05:05.0: setting latency timer to 64 [ 1.007098] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.007101] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.007103] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.007105] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff] [ 1.007107] pci_bus 0000:01: resource 0 [io 0xa000-0xafff] [ 1.007109] pci_bus 0000:01: resource 1 [mem 0xfe600000-0xfe7fffff] [ 1.007111] pci_bus 0000:01: resource 2 [mem 0xfca00000-0xfcbfffff 64bit pref] [ 1.007114] pci_bus 0000:02: resource 0 [io 0x9000-0x9fff] [ 1.007116] pci_bus 0000:02: resource 1 [mem 0xfe400000-0xfe5fffff] [ 1.007118] pci_bus 0000:02: resource 2 [mem 0xfc800000-0xfc9fffff 64bit pref] [ 1.007120] pci_bus 0000:03: resource 0 [io 0x8000-0x8fff] [ 1.007122] pci_bus 0000:03: resource 1 [mem 0xfe200000-0xfe3fffff] [ 1.007124] pci_bus 0000:03: resource 2 [mem 0xfc600000-0xfc7fffff 64bit pref] [ 1.007127] pci_bus 0000:04: resource 0 [io 0x7000-0x7fff] [ 1.007129] pci_bus 0000:04: resource 1 [mem 0xfe000000-0xfe1fffff] [ 1.007131] pci_bus 0000:04: resource 2 [mem 0xfc400000-0xfc5fffff 64bit pref] [ 1.007133] pci_bus 0000:05: resource 0 [io 0x1000-0x6fff] [ 1.007135] pci_bus 0000:05: resource 1 [mem 0xfd200000-0xfdffffff] [ 1.007137] pci_bus 0000:05: resource 2 [mem 0xfb800000-0xfc3fffff 64bit pref] [ 1.007139] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7] [ 1.007141] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff] [ 1.007143] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff] [ 1.007145] pci_bus 0000:05: resource 7 [mem 0xc0000000-0xfebfffff] [ 1.007147] pci_bus 0000:06: resource 0 [io 0x6000-0x6fff] [ 1.007149] pci_bus 0000:06: resource 1 [mem 0xfdc00000-0xfddfffff] [ 1.007151] pci_bus 0000:06: resource 2 [mem 0xfc200000-0xfc3fffff 64bit pref] [ 1.007154] pci_bus 0000:07: resource 0 [io 0x5000-0x5fff] [ 1.007155] pci_bus 0000:07: resource 1 [mem 0xfda00000-0xfdbfffff] [ 1.007157] pci_bus 0000:07: resource 2 [mem 0xfc000000-0xfc1fffff 64bit pref] [ 1.007160] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff] [ 1.007162] pci_bus 0000:08: resource 1 [mem 0xfd800000-0xfd9fffff] [ 1.007164] pci_bus 0000:08: resource 2 [mem 0xfbe00000-0xfbffffff 64bit pref] [ 1.007166] pci_bus 0000:09: resource 0 [io 0x3000-0x3fff] [ 1.007168] pci_bus 0000:09: resource 1 [mem 0xfd600000-0xfd7fffff] [ 1.007170] pci_bus 0000:09: resource 2 [mem 0xfbc00000-0xfbdfffff 64bit pref] [ 1.007172] pci_bus 0000:0a: resource 0 [io 0x2000-0x2fff] [ 1.007174] pci_bus 0000:0a: resource 1 [mem 0xfd400000-0xfd5fffff] [ 1.007176] pci_bus 0000:0a: resource 2 [mem 0xfba00000-0xfbbfffff 64bit pref] [ 1.007178] pci_bus 0000:0b: resource 0 [io 0x1000-0x1fff] [ 1.007180] pci_bus 0000:0b: resource 1 [mem 0xfd200000-0xfd3fffff] [ 1.007182] pci_bus 0000:0b: resource 2 [mem 0xfb800000-0xfb9fffff 64bit pref] [ 1.007463] NET: Registered protocol family 2 [ 1.007971] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.009183] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.010512] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.010597] TCP: Hash tables configured (established 524288 bind 65536) [ 1.010601] TCP reno registered [ 1.010621] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.010838] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.010963] NET: Registered protocol family 1 [ 1.012125] pci 0000:00:0b.0: Boot video device [ 1.012297] PCI: CLS 0 bytes, default 64 [ 1.012333] Unpacking initramfs... [ 1.097704] Freeing initrd memory: 5836k freed [ 1.098224] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.098228] Placing 64MB software IO TLB between ffff88007bfd4000 - ffff88007ffd4000 [ 1.098230] software IO TLB at phys 0x7bfd4000 - 0x7ffd4000 [ 1.098507] futex hash table entries: 512 (order: 4, 65536 bytes) [ 1.098515] Initialise module verification [ 1.098580] audit: initializing netlink socket (enabled) [ 1.098588] type=2000 audit(1482315013.092:1): initialized [ 1.114263] bounce pool size: 64 pages [ 1.114270] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.115177] VFS: Disk quotas dquot_6.5.2 [ 1.115206] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.115456] msgmni has been set to 5955 [ 1.115590] alg: No test for stdrng (krng) [ 1.115597] Asymmetric key parser 'x509' registered [ 1.115619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 1.115636] io scheduler noop registered (default) [ 1.115638] io scheduler deadline registered [ 1.115658] io scheduler cfq registered [ 1.115815] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.115980] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 1.119118] pcieport 0000:00:02.0: setting latency timer to 64 [ 1.119282] pcieport 0000:00:02.0: irq 41 for MSI/MSI-X [ 1.122249] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.122405] pcieport 0000:00:03.0: irq 42 for MSI/MSI-X [ 1.125292] pcieport 0000:00:05.0: setting latency timer to 64 [ 1.125460] pcieport 0000:00:05.0: irq 43 for MSI/MSI-X [ 1.130351] aer 0000:00:01.0:pcie02: service driver aer loaded [ 1.130438] aer 0000:00:02.0:pcie02: service driver aer loaded [ 1.130522] aer 0000:00:03.0:pcie02: service driver aer loaded [ 1.130605] aer 0000:00:05.0:pcie02: service driver aer loaded [ 1.130633] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 1.130636] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 1.130647] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 1.130670] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 1.130672] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 1.130683] pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded [ 1.130704] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 1.130706] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 1.130717] pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded [ 1.130739] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt [ 1.130741] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt [ 1.130752] pcie_pme 0000:00:05.0:pcie01: service driver pcie_pme loaded [ 1.130800] vesafb: mode is 1024x768x24, linelength=3072, pages=2 [ 1.130802] vesafb: scrolling: redraw [ 1.130804] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0 [ 1.130843] vesafb: framebuffer at 0xfa800000, mapped to 0xffffc90012680000, using 4608k, total 8192k [ 1.130928] bootsplash 3.2.0-2010/03/31: looking for picture... [ 1.130929] bootsplash: silentjpeg size 59221 bytes [ 1.136811] bootsplash: ...found (1024x768, 31358 bytes, v3). [ 1.136860] bootsplash: silentjpeg size 62784 bytes [ 1.151964] Console: switching to colour frame buffer device 124x44 [ 1.162357] fb0: VESA VGA frame buffer device [ 1.162391] GHES: HEST is not enabled! [ 1.162434] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 1.162606] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.392267] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.428233] Non-volatile memory driver v1.3 [ 1.428236] Linux agpgart interface v0.103 [ 1.428281] Fixed MDIO Bus: probed [ 1.428310] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 1.428763] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.428769] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.428803] mousedev: PS/2 mouse device common for all mice [ 1.428949] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.429239] cpuidle: using governor ladder [ 1.429241] cpuidle: using governor menu [ 1.429270] EFI Variables Facility v0.08 2004-May-17 [ 1.429403] TCP cubic registered [ 1.429433] Registering the dns_resolver key type [ 1.429502] Loading module verification certificates [ 1.429540] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7' [ 1.429572] MODSIGN: Loaded cert 'SUSE Linux Enterprise Secure Boot Signkey: 3fb077b6cebc6ff2522e1c148c57c777c788e3e7' [ 1.429596] PM: Checking hibernation image partition /dev/disk/by-id/scsi-0FTS_PRAID_EP420i_SDA-part5 [ 1.429598] PM: Hibernation image not present or could not be loaded. [ 1.429606] registered taskstats version 1 [ 1.430607] Magic number: 12:397:176 [ 1.430656] acpi device:0c: hash matches [ 1.431880] Freeing unused kernel memory: 1360k freed [ 1.432039] Write protecting the kernel read-only data: 10240k [ 1.434365] Freeing unused kernel memory: 1560k freed [ 1.435933] Freeing unused kernel memory: 900k freed [ 1.463108] SCSI subsystem initialized [ 1.463624] megasas: 06.806.08.00-rc1 Thu. Sep. 4 17:00:00 PDT 2014 [ 1.463660] megasas: 0x1000:0x0079:0x1000:0x9261: bus 0:slot 6:func 0 [ 1.463717] megaraid_sas 0000:00:06.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22 [ 1.463754] megaraid_sas 0000:00:06.0: setting latency timer to 64 [ 1.464054] megasas: FW now in Ready state [ 1.464204] megaraid_sas 0000:00:06.0: irq 44 for MSI/MSI-X [ 1.464239] megaraid_sas 0000:00:06.0: [scsi0]: FW supports<0> MSIX vector,Online CPUs: <2>,Current MSIX <1> [ 1.464735] megasas_init_mfi: fw_support_ieee=67108864 [ 1.464738] megasas: INIT adapter done [ 1.464826] megaraid_sas 0000:00:06.0: Controller type: MR,Memory size is: 512MB [ 1.464885] scsi0 : LSI SAS based MegaRAID driver [ 1.466549] scsi 0:2:0:0: Direct-Access FTS PRAID EP420i 4.25 PQ: 0 ANSI: 5 [ 1.475523] libata version 3.00 loaded. [ 1.475942] ahci 0000:00:1f.2: version 3.0 [ 1.475984] ACPI: PCI Interrupt Link [GSIA] enabled at IRQ 16 [ 1.476034] ahci 0000:00:1f.2: PCI INT A -> Link[GSIA] -> GSI 16 (level, high) -> IRQ 16 [ 1.476154] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X [ 1.476385] ahci 0000:00:1f.2: AHCI 0001.0000 32 slots 6 ports 1.5 Gbps 0x3f impl SATA mode [ 1.476414] ahci 0000:00:1f.2: flags: ncq only [ 1.476463] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.476990] scsi1 : ahci [ 1.477072] scsi2 : ahci [ 1.477135] scsi3 : ahci [ 1.477196] scsi4 : ahci [ 1.477256] scsi5 : ahci [ 1.477312] scsi6 : ahci [ 1.477367] ata2: SATA max UDMA/133 abar address@hidden port 0xfea35100 irq 45 [ 1.477398] ata3: SATA max UDMA/133 abar address@hidden port 0xfea35180 irq 45 [ 1.477429] ata4: SATA max UDMA/133 abar address@hidden port 0xfea35200 irq 45 [ 1.477458] ata5: SATA max UDMA/133 abar address@hidden port 0xfea35280 irq 45 [ 1.477488] ata6: SATA max UDMA/133 abar address@hidden port 0xfea35300 irq 45 [ 1.477517] ata7: SATA max UDMA/133 abar address@hidden port 0xfea35380 irq 45 [ 1.796097] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.796260] ata6: SATA link down (SStatus 0 SControl 300) [ 1.796363] ata5: SATA link down (SStatus 0 SControl 300) [ 1.796461] ata2: SATA link down (SStatus 0 SControl 300) [ 1.796567] ata7: SATA link down (SStatus 0 SControl 300) [ 1.796616] ata4.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100 [ 1.796645] ata4.00: applying bridge limits [ 1.796814] ata3: SATA link down (SStatus 0 SControl 300) [ 1.796933] ata4.00: configured for UDMA/100 [ 1.797100] scsi 3:0:0:0: CD-ROM QEMU QEMU DVD-ROM 2.5+ PQ: 0 ANSI: 5 [ 1.801016] sym53c8xx 0000:02:00.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22 [ 1.801996] sym0: <895a> rev 0x0 at pci 0000:02:00.0 irq 22 [ 1.804128] sym0: No NVRAM, ID 7, Fast-40, LVD, parity checking [ 1.808004] sym0: SCSI BUS has been reset. [ 1.812118] scsi7 : sym-2.2.3 [ 2.068643] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input1 [ 2.112101] Refined TSC clocksource calibration: 2594.052 MHz. [ 4.817405] virtio-pci 0000:01:00.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21 [ 4.817478] virtio-pci 0000:01:00.0: setting latency timer to 64 [ 4.817661] virtio-pci 0000:03:00.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23 [ 4.821655] virtio-pci 0000:03:00.0: setting latency timer to 64 [ 4.821759] virtio-pci 0000:04:00.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21 [ 4.825775] virtio-pci 0000:04:00.0: setting latency timer to 64 [ 4.829969] alua: device handler registered [ 4.833339] rdac: device handler registered [ 4.836626] emc: device handler registered [ 4.839934] hp_sw: device handler registered [ 4.842360] udev: starting version 147 [ 4.873682] ACPI: acpi_idle registered with cpuidle [ 4.880289] sd 0:2:0:0: [sda] 629145600 512-byte logical blocks: (322 GB/300 GiB) [ 4.880418] sd 0:2:0:0: [sda] Write Protect is off [ 4.880447] sd 0:2:0:0: [sda] Mode Sense: 63 00 00 08 [ 4.880481] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.910195] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 4.910559] sd 0:2:0:0: [sda] Attached SCSI disk [ 6.920272] kjournald starting. Commit interval 15 seconds [ 6.920385] EXT3-fs (sda7): using internal journal [ 6.920418] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 15.584838] udev: starting version 147 [ 16.806942] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 16.807001] ACPI: Power Button [PWRF] [ 17.086736] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 17.177774] iTCO_vendor_support: vendor-support=0 [ 17.215722] rtc_cmos 00:01: RTC can wake from S4 [ 17.215878] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 17.216069] rtc0: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 17.217618] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 17.219668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 17.220924] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 17.221083] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0660) [ 17.221159] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.445163] virtio-pci 0000:03:00.0: irq 46 for MSI/MSI-X [ 17.445175] virtio-pci 0000:03:00.0: irq 47 for MSI/MSI-X [ 17.505757] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 17.505789] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 17.505848] e1000 0000:00:04.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20 [ 17.509079] e1000 0000:00:04.0: setting latency timer to 64 [ 17.523187] virtio-pci 0000:01:00.0: irq 48 for MSI/MSI-X [ 17.523199] virtio-pci 0000:01:00.0: irq 49 for MSI/MSI-X [ 17.523209] virtio-pci 0000:01:00.0: irq 50 for MSI/MSI-X [ 17.523219] virtio-pci 0000:01:00.0: irq 51 for MSI/MSI-X [ 17.523626] scsi8 : Virtio SCSI HBA [ 17.524618] scsi 8:0:2:5: Sequential-Access HP Ultrium 6-SCSI 23AB PQ: 0 ANSI: 5 [ 17.524913] scsi 8:0:2:4: Sequential-Access HP Ultrium 6-SCSI 23AB PQ: 0 ANSI: 5 [ 17.525190] scsi 8:0:2:3: Sequential-Access HP Ultrium 5-SCSI 0001 PQ: 0 ANSI: 5 [ 17.525448] scsi 8:0:2:2: Sequential-Access HP Ultrium 5-SCSI 0001 PQ: 0 ANSI: 5 [ 17.525707] scsi 8:0:2:1: Sequential-Access HP Ultrium 5-SCSI 0001 PQ: 0 ANSI: 5 [ 17.694117] sr0: scsi3-mmc drive: 4x/4x cd/rw xa/form2 tray [ 17.694150] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 17.694246] sr 3:0:0:0: Attached scsi CD-ROM sr0 [ 17.696178] sd 0:2:0:0: Attached scsi generic sg0 type 0 [ 17.696223] sr 3:0:0:0: Attached scsi generic sg1 type 5 [ 17.696264] scsi 8:0:2:5: Attached scsi generic sg2 type 1 [ 17.696303] scsi 8:0:2:4: Attached scsi generic sg3 type 1 [ 17.696341] scsi 8:0:2:3: Attached scsi generic sg4 type 1 [ 17.696386] scsi 8:0:2:2: Attached scsi generic sg5 type 1 [ 17.696424] scsi 8:0:2:1: Attached scsi generic sg6 type 1 [ 17.825189] e1000 0000:00:04.0: eth0: (PCI:33MHz:32-bit) 00:82:67:84:01:01 [ 17.825251] e1000 0000:00:04.0: eth0: Intel(R) PRO/1000 Network Connection [ 17.825339] e1000 0000:00:10.0: PCI INT A -> Link[GSIE] -> GSI 20 (level, high) -> IRQ 20 [ 17.829441] e1000 0000:00:10.0: setting latency timer to 64 [ 18.013995] osst :I: Tape driver with OnStream support version 0.99.4 [ 18.013996] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 18.143843] e1000 0000:00:10.0: eth1: (PCI:33MHz:32-bit) 00:82:67:84:01:02 [ 18.143872] e1000 0000:00:10.0: eth1: Intel(R) PRO/1000 Network Connection [ 18.143938] e1000 0000:00:11.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21 [ 18.147050] e1000 0000:00:11.0: setting latency timer to 64 [ 18.462674] e1000 0000:00:11.0: eth2: (PCI:33MHz:32-bit) 00:fc:61:69:00:01 [ 18.462707] e1000 0000:00:11.0: eth2: Intel(R) PRO/1000 Network Connection [ 18.462771] e1000 0000:00:12.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22 [ 18.465913] e1000 0000:00:12.0: setting latency timer to 64 [ 18.511555] Disabling lock debugging due to kernel taint [ 18.511825] st: Version 20110511, fixed bufsize 32768, s/g segs 256 [ 18.511966] st 8:0:2:5: Attached scsi tape st0 [ 18.512014] st 8:0:2:5: st0: try direct i/o: yes (alignment 4 B) [ 18.512121] st 8:0:2:4: Attached scsi tape st1 [ 18.512146] st 8:0:2:4: st1: try direct i/o: yes (alignment 4 B) [ 18.512248] st 8:0:2:3: Attached scsi tape st2 [ 18.512273] st 8:0:2:3: st2: try direct i/o: yes (alignment 4 B) [ 18.512375] st 8:0:2:2: Attached scsi tape st3 [ 18.512400] st 8:0:2:2: st3: try direct i/o: yes (alignment 4 B) [ 18.512504] st 8:0:2:1: Attached scsi tape st4 [ 18.512529] st 8:0:2:1: st4: try direct i/o: yes (alignment 4 B) [ 18.776302] e1000 0000:00:12.0: eth3: (PCI:33MHz:32-bit) 00:fc:61:69:00:02 [ 18.776337] e1000 0000:00:12.0: eth3: Intel(R) PRO/1000 Network Connection [ 18.776405] e1000 0000:00:13.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23 [ 18.780058] e1000 0000:00:13.0: setting latency timer to 64 [ 19.095319] e1000 0000:00:13.0: eth4: (PCI:33MHz:32-bit) 00:fc:61:69:00:05 [ 19.095366] e1000 0000:00:13.0: eth4: Intel(R) PRO/1000 Network Connection [ 19.095453] e1000 0000:08:01.0: PCI INT A -> Link[GSIH] -> GSI 23 (level, high) -> IRQ 23 [ 19.095463] i801_smbus 0000:00:1f.3: PCI INT A -> Link[GSIA] -> GSI 16 (level, high) -> IRQ 16 [ 19.099313] e1000 0000:08:01.0: setting latency timer to 64 [ 19.411991] e1000 0000:08:01.0: eth5: (PCI:33MHz:32-bit) 00:86:67:84:01:06 [ 19.412049] e1000 0000:08:01.0: eth5: Intel(R) PRO/1000 Network Connection [ 19.412109] e1000 0000:0a:01.0: PCI INT A -> Link[GSIF] -> GSI 21 (level, high) -> IRQ 21 [ 19.415932] e1000 0000:0a:01.0: setting latency timer to 64 [ 19.728016] e1000 0000:0a:01.0: eth6: (PCI:33MHz:32-bit) 00:82:67:84:01:04 [ 19.728054] e1000 0000:0a:01.0: eth6: Intel(R) PRO/1000 Network Connection [ 19.728111] e1000 0000:0b:01.0: PCI INT A -> Link[GSIG] -> GSI 22 (level, high) -> IRQ 22 [ 19.732396] e1000 0000:0b:01.0: setting latency timer to 64 [ 20.043914] e1000 0000:0b:01.0: eth7: (PCI:33MHz:32-bit) 00:82:67:84:01:05 [ 20.043945] e1000 0000:0b:01.0: eth7: Intel(R) PRO/1000 Network Connection [ 20.133906] Adding 12585980k swap on /dev/sda5. Priority:-1 extents:1 across:12585980k [ 20.483489] type=1111 audit(1482315032.480:2): user pid=1029 uid=0 auid=4294967295 ses=4294967295 msg='changing system time: exe="/sbin/hwclock" (hostname=?, addr=?, terminal=console res=success)' [ 20.512821] device-mapper: uevent: version 1.0.3 [ 20.512909] device-mapper: ioctl: 4.25.0-ioctl (2012-07-25) initialised: address@hidden [ 20.573217] pps_core: LinuxPPS API ver. 1 registered [ 20.573250] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 20.573671] PTP clock support registered [ 22.173232] loop: module loaded [ 22.567651] kjournald starting. Commit interval 15 seconds [ 22.567799] EXT3-fs (sda6): using internal journal [ 22.567831] EXT3-fs (sda6): mounted filesystem with ordered data mode [ 25.707938] fuse init (API version 7.16) [ 28.470827] ipmi message handler version 39.2 [ 28.478390] ipmi device interface [ 28.480175] IPMI System Interface driver. [ 28.480196] ipmi_si: probing via SMBIOS [ 28.480198] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 28.480200] ipmi_si: Adding SMBIOS-specified kcs state machine [ 28.480203] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 28.480216] ipmi_si: Interface detection failed [ 50.826472] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 51.208985] ip_tables: (C) 2000-2006 Netfilter Core Team [ 51.214329] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 51.239140] type=1325 audit(1482315063.236:3): table=filter family=2 entries=0 [ 51.239344] type=1300 audit(1482315063.236:3): arch=c000003e syscall=175 success=yes exit=0 a0=7fc2e7110000 a1=1ea7 a2=61e440 a3=7fffd86f1450 items=0 ppid=1838 pid=1839 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null) [ 51.266801] type=1325 audit(1482315063.260:4): table=raw family=2 entries=0 [ 51.267095] type=1300 audit(1482315063.260:4): arch=c000003e syscall=175 success=yes exit=0 a0=7efc422a1000 a1=1a1f a2=61e440 a3=7fff6ce4cdb0 items=0 ppid=1844 pid=1845 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="modprobe" exe="/sbin/modprobe" key=(null) [ 51.293522] type=1325 audit(1482315063.288:5): table=filter family=2 entries=4 [ 51.293532] type=1300 audit(1482315063.288:5): arch=c000003e syscall=54 success=yes exit=0 a0=5 a1=0 a2=40 a3=60fa90 items=0 ppid=1810 pid=1837 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-batch" exe="/usr/sbin/iptables-batch" key=(null) [ 51.294670] type=1325 audit(1482315063.288:6): table=raw family=2 entries=3 [ 51.294680] type=1300 audit(1482315063.288:6): arch=c000003e syscall=54 success=yes exit=0 a0=7 a1=0 a2=40 a3=60b320 items=0 ppid=1810 pid=1837 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="iptables-batch" exe="/usr/sbin/iptables-batch" key=(null) [ 75.445434] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 75.648765] device eth2 entered promiscuous mode [ 75.648771] type=1700 audit(1482315087.640:7): dev=eth2 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295 [ 75.650085] e1000: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 75.651762] type=1300 audit(1482315087.640:7): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffe0dee6da0 a2=0 a3=7ffe0dee6b10 items=0 ppid=3782 pid=3960 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null) [ 75.821745] device eth3 entered promiscuous mode [ 75.821750] type=1700 audit(1482315087.812:8): dev=eth3 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295 [ 75.823481] type=1300 audit(1482315087.812:8): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffdcda3c8a0 a2=0 a3=7ffdcda3c610 items=0 ppid=4013 pid=4191 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null) [ 75.825441] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 75.983641] device eth4 entered promiscuous mode [ 75.983647] type=1700 audit(1482315087.976:9): dev=eth4 prom=256 old_prom=0 auid=4294967295 uid=0 gid=0 ses=4294967295 [ 75.985424] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 75.986851] type=1300 audit(1482315087.976:9): arch=c000003e syscall=46 success=yes exit=32 a0=3 a1=7ffcea7f6a70 a2=0 a3=7ffcea7f67e0 items=0 ppid=4244 pid=4422 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=4294967295 comm="ip" exe="/sbin/ip" key=(null) [ 77.328187] 802.1Q VLAN Support v1.8 [ 77.328200] 8021q: adding VLAN 0 to HW filter on device eth0 [ 77.328276] 8021q: adding VLAN 0 to HW filter on device eth2 [ 77.328349] 8021q: adding VLAN 0 to HW filter on device eth3 [ 77.328384] 8021q: adding VLAN 0 to HW filter on device eth4 [ 77.330204] NET: Registered protocol family 17 [ 77.532547] scsi9 : FCoE Driver [ 77.532688] fcoe: No FDMI support. [ 77.532818] host9: libfc: Link up on port (000000) [ 77.534158] scsi10 : FCoE Driver [ 77.534296] fcoe: No FDMI support. [ 77.534375] host10: libfc: Link up on port (000000) [ 77.535633] scsi11 : FCoE Driver [ 77.535772] fcoe: No FDMI support. [ 77.535852] host11: libfc: Link up on port (000000) [ 78.052601] host11: Assigned Port ID 000002 [ 78.080543] host10: Assigned Port ID 000001 [ 78.112603] host9: Assigned Port ID 000005 [ 81.132045] scsi 10:0:0:0: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.132156] sd 10:0:0:0: Attached scsi generic sg7 type 0 [ 81.133259] sd 10:0:0:0: [sdb] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.133403] scsi 10:0:0:7: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.133478] sd 10:0:0:7: Attached scsi generic sg8 type 0 [ 81.134151] sd 10:0:0:7: [sdc] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.134279] scsi 10:0:0:6: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.134396] sd 10:0:0:6: Attached scsi generic sg9 type 0 [ 81.134871] sd 10:0:0:0: [sdb] Write Protect is off [ 81.134875] sd 10:0:0:0: [sdb] Mode Sense: 69 00 00 08 [ 81.135425] sd 10:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.135562] sd 10:0:0:7: [sdc] Write Protect is off [ 81.135566] sd 10:0:0:7: [sdc] Mode Sense: 69 00 00 08 [ 81.135586] sd 10:0:0:6: [sdd] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.136114] scsi 10:0:0:5: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.136125] sd 10:0:0:7: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.136228] sd 10:0:0:5: Attached scsi generic sg10 type 0 [ 81.136966] sd 10:0:0:6: [sdd] Write Protect is off [ 81.136970] sd 10:0:0:6: [sdd] Mode Sense: 69 00 00 08 [ 81.137139] scsi 10:0:0:4: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.137237] sd 10:0:0:4: Attached scsi generic sg11 type 0 [ 81.137409] sd 10:0:0:5: [sde] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.137723] sd 10:0:0:6: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.139115] scsi 10:0:0:3: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.139214] sd 10:0:0:3: Attached scsi generic sg12 type 0 [ 81.139961] sd 10:0:0:5: [sde] Write Protect is off [ 81.139966] sd 10:0:0:5: [sde] Mode Sense: 69 00 00 08 [ 81.140040] scsi 10:0:0:2: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.140140] sd 10:0:0:2: Attached scsi generic sg13 type 0 [ 81.141186] sd 10:0:0:5: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.141377] scsi 10:0:0:15: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 81.141476] sd 10:0:0:15: Attached scsi generic sg14 type 0 [ 81.142989] sd 10:0:0:4: [sdf] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.143224] sdb: sdb1 [ 81.144462] sdc: sdc1 [ 81.145161] sd 10:0:0:4: [sdf] Write Protect is off [ 81.145165] sd 10:0:0:4: [sdf] Mode Sense: 69 00 00 08 [ 81.145604] sdd: sdd1 [ 81.146596] sd 10:0:0:4: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.146747] sd 10:0:0:3: [sdg] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.146775] sd 10:0:0:0: [sdb] Attached SCSI disk [ 81.147745] sd 10:0:0:7: [sdc] Attached SCSI disk [ 81.148132] sd 10:0:0:2: [sdh] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 81.148451] sd 10:0:0:3: [sdg] Write Protect is off [ 81.148455] sd 10:0:0:3: [sdg] Mode Sense: 69 00 00 08 [ 81.148671] sd 10:0:0:15: [sdi] 268435456 512-byte logical blocks: (137 GB/128 GiB) [ 81.149135] sd 10:0:0:3: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.149535] sd 10:0:0:2: [sdh] Write Protect is off [ 81.149539] sd 10:0:0:2: [sdh] Mode Sense: 69 00 00 08 [ 81.149557] sd 10:0:0:6: [sdd] Attached SCSI disk [ 81.149823] sd 10:0:0:15: [sdi] Write Protect is off [ 81.149827] sd 10:0:0:15: [sdi] Mode Sense: 69 00 00 08 [ 81.150220] sde: sde1 [ 81.150397] sd 10:0:0:2: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.150543] sd 10:0:0:15: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 81.152696] sd 10:0:0:5: [sde] Attached SCSI disk [ 81.153696] sdi: sdi1 sdi2 [ 81.155018] sdf: sdf1 [ 81.156046] sdg: sdg1 [ 81.156625] sd 10:0:0:15: [sdi] Attached SCSI disk [ 81.157323] sdh: sdh1 [ 81.157476] sd 10:0:0:4: [sdf] Attached SCSI disk [ 81.159273] sd 10:0:0:3: [sdg] Attached SCSI disk [ 81.160147] sd 10:0:0:2: [sdh] Attached SCSI disk [ 93.185554] scsi 11:0:1:0: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.185690] sd 11:0:1:0: Attached scsi generic sg15 type 0 [ 93.186866] scsi 11:0:1:7: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.186958] sd 11:0:1:7: Attached scsi generic sg16 type 0 [ 93.187029] sd 11:0:1:0: [sdj] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.187513] scsi 11:0:1:6: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.187594] sd 11:0:1:6: Attached scsi generic sg17 type 0 [ 93.187797] sd 11:0:1:7: [sdk] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.188254] scsi 11:0:1:5: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.188335] sd 11:0:1:5: Attached scsi generic sg18 type 0 [ 93.188559] sd 11:0:1:0: [sdj] Write Protect is off [ 93.188563] sd 11:0:1:0: [sdj] Mode Sense: 69 00 00 08 [ 93.188575] sd 11:0:1:6: [sdl] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.189030] scsi 11:0:1:4: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.189158] sd 11:0:1:4: Attached scsi generic sg19 type 0 [ 93.189559] sd 11:0:1:7: [sdk] Write Protect is off [ 93.189563] sd 11:0:1:7: [sdk] Mode Sense: 69 00 00 08 [ 93.189778] sd 11:0:1:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.190242] sd 11:0:1:7: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.190581] sd 11:0:1:5: [sdm] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.190593] scsi 11:0:1:3: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.190679] sd 11:0:1:3: Attached scsi generic sg20 type 0 [ 93.191534] sd 11:0:1:6: [sdl] Write Protect is off [ 93.191538] sd 11:0:1:6: [sdl] Mode Sense: 69 00 00 08 [ 93.191564] sd 11:0:1:4: [sdn] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.191663] scsi 11:0:1:2: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.191742] sd 11:0:1:2: Attached scsi generic sg21 type 0 [ 93.192079] sd 11:0:1:5: [sdm] Write Protect is off [ 93.192083] sd 11:0:1:5: [sdm] Mode Sense: 69 00 00 08 [ 93.192402] sd 11:0:1:6: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.192672] scsi 11:0:1:15: Direct-Access FUJITSU ETERNUS_DXL 0000 PQ: 0 ANSI: 5 [ 93.192754] sd 11:0:1:15: Attached scsi generic sg22 type 0 [ 93.192939] sd 11:0:1:5: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.193086] sd 11:0:1:4: [sdn] Write Protect is off [ 93.193090] sd 11:0:1:4: [sdn] Mode Sense: 69 00 00 08 [ 93.193768] sd 11:0:1:4: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.194166] sd 11:0:1:3: [sdo] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.196035] sd 11:0:1:3: [sdo] Write Protect is off [ 93.196040] sd 11:0:1:3: [sdo] Mode Sense: 69 00 00 08 [ 93.196677] sd 11:0:1:2: [sdp] 1048576000 512-byte logical blocks: (536 GB/500 GiB) [ 93.196951] sd 11:0:1:3: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.198547] sdk: sdk1 [ 93.198680] sd 11:0:1:2: [sdp] Write Protect is off [ 93.198684] sd 11:0:1:2: [sdp] Mode Sense: 69 00 00 08 [ 93.200247] sd 11:0:1:2: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.201373] sdj: sdj1 [ 93.202162] sd 11:0:1:15: [sdq] 268435456 512-byte logical blocks: (137 GB/128 GiB) [ 93.202811] sd 11:0:1:7: [sdk] Attached SCSI disk [ 93.203804] sdm: sdm1 [ 93.204079] sdl: sdl1 [ 93.204260] sd 11:0:1:15: [sdq] Write Protect is off [ 93.204264] sd 11:0:1:15: [sdq] Mode Sense: 69 00 00 08 [ 93.205413] sd 11:0:1:15: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 93.206188] sdn: sdn1 [ 93.206733] sd 11:0:1:0: [sdj] Attached SCSI disk [ 93.207435] sdo: sdo1 [ 93.208232] sd 11:0:1:6: [sdl] Attached SCSI disk [ 93.208393] sd 11:0:1:5: [sdm] Attached SCSI disk [ 93.209666] sdq: sdq1 sdq2 [ 93.209915] sdp: sdp1 [ 93.210554] sd 11:0:1:3: [sdo] Attached SCSI disk [ 93.211224] sd 11:0:1:4: [sdn] Attached SCSI disk [ 93.213350] sd 11:0:1:15: [sdq] Attached SCSI disk [ 93.213450] sd 11:0:1:2: [sdp] Attached SCSI disk [ 95.981911] type=1305 audit(1482315107.980:10): audit_pid=5513 old=0 auid=4294967295 ses=4294967295 res=1 [ 108.021320] RPC: Registered named UNIX socket transport module. [ 108.021321] RPC: Registered udp transport module. [ 108.021322] RPC: Registered tcp transport module. [ 108.021323] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 108.056519] Installing knfsd (copyright (C) 1996 address@hidden). [ 108.736177] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 108.736429] NFSD: starting 90-second grace period [ 110.346242] Fusion MPT base driver 4.28.00.01suse [ 110.346244] Copyright (c) 1999-2010 LSI Corporation [ 110.347304] Fusion MPT misc device (ioctl) driver 4.28.00.01suse [ 110.347334] mptctl: Registered with Fusion MPT base driver [ 110.347336] mptctl: /dev/mptctl @ (major,minor=10,220) [ 128.184307] st0: Block limits 4 - 1048576 bytes. [ 128.184891] st1: Block limits 4 - 1048576 bytes. [ 128.186614] st2: Block limits 4 - 1048576 bytes. [ 128.187098] st3: Block limits 4 - 1048576 bytes. [ 128.187589] st4: Block limits 4 - 1048576 bytes. [ 134.812165] st: Unloaded. [ 136.915083] st: Version 20110511, fixed bufsize 32768, s/g segs 256 [ 136.915206] st 8:0:2:5: Attached scsi tape st0 [ 136.915207] st 8:0:2:5: st0: try direct i/o: yes (alignment 4 B) [ 136.915297] st 8:0:2:4: Attached scsi tape st1 [ 136.915298] st 8:0:2:4: st1: try direct i/o: yes (alignment 4 B) [ 136.915388] st 8:0:2:3: Attached scsi tape st2 [ 136.915389] st 8:0:2:3: st2: try direct i/o: yes (alignment 4 B) [ 136.915480] st 8:0:2:2: Attached scsi tape st3 [ 136.915481] st 8:0:2:2: st3: try direct i/o: yes (alignment 4 B) [ 136.915570] st 8:0:2:1: Attached scsi tape st4 [ 136.915571] st 8:0:2:1: st4: try direct i/o: yes (alignment 4 B) [ 136.938347] licDriver: module loaded (major: 245) [ 139.272516] device-mapper: multipath: version 1.6.0 loaded [ 139.663173] device-mapper: multipath service-time: version 0.2.0 loaded [ 164.197569] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 203.855452] Emulex LightPulse Fibre Channel SCSI driver 10.6.193.12.6fts [ 203.855454] Copyright(c) 2004-2015 Emulex. All rights reserved. [ 203.878824] trc_m: kernel trace driver, version 0.0.1, numeric time zone 01 (1) [ 205.678380] fct4: ---vvv------------------ fct4_init ------------------vvv--- [ 205.678652] fct4: Fibre Channel SLI4 series SCSI target-mode low level driver 0.0.3 [ 205.678654] fct4: Copyright(c) 2004-2015 Emulex. All rights reserved. [ 205.678655] fct4: Copyright(c) 2013-2015 Fujitsu Technology Solutions. [ 205.678656] fct4: operation mode selected: fcp_initiator [ fcp_target ] ficon [ 255.690797] st0: Block limits 4 - 1048576 bytes. [ 255.691163] st1: Block limits 4 - 1048576 bytes. [ 255.691492] st2: Block limits 4 - 1048576 bytes. [ 255.691816] st3: Block limits 4 - 1048576 bytes. [ 255.692148] st4: Block limits 4 - 1048576 bytes. [ 348.819335] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 348.820183] bonding: SLAN00 is being created... [ 348.820854] bonding: SLAN00: Setting MII monitoring interval to 100. [ 348.822274] bonding: SLAN00: Setting up delay to 30000. [ 348.822642] bonding: SLAN00: setting mode to active-backup (1). [ 348.829327] bonding: SLAN00: Adding slave eth5. [ 348.832784] 8021q: adding VLAN 0 to HW filter on device eth5 [ 348.832847] bonding: SLAN00: enslaving eth5 as a backup interface with a down link. [ 348.833590] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 348.881372] bonding: SLAN00: link status up for interface eth5, enabling it in 0 ms. [ 348.882105] 8021q: adding VLAN 0 to HW filter on device SLAN00 [ 348.885120] bonding: SLAN00: link status definitely up for interface eth5, 1000 Mbps full duplex. [ 348.885122] bonding: SLAN00: making interface eth5 the new active one. [ 348.885628] bonding: SLAN00: first active interface up! [ 349.625395] 8021q: adding VLAN 0 to HW filter on device eth1 [ 351.628467] e1000: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 352.415719] 8021q: adding VLAN 0 to HW filter on device eth6 [ 354.420657] e1000: eth6 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 355.175484] 8021q: adding VLAN 0 to HW filter on device eth7 [ 357.180512] e1000: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 385.572635] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36632 PROTO=2 [ 514.220441] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36633 PROTO=2 [ 523.456757] e1000: eth7 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 555.564071] stg4: Fibre Channel SLI4 series SCSI target-mode emulation interface driver 0.0.1 [ 602.838775] bootsplash: status on console 0 changed to on [ 642.866544] SFW2-INext-DROP-DEFLT IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:12:cf:19:bb:e0:08:00 SRC=172.17.38.102 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=36634 PROTO=2