qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC 00/15] qmp: Report supported device types on 'quer


From: Marcel Apfelbaum
Subject: Re: [Qemu-devel] [RFC 00/15] qmp: Report supported device types on 'query-machines'
Date: Wed, 23 Nov 2016 18:43:16 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.1.1

On 11/22/2016 03:11 AM, Eduardo Habkost wrote:
The Problem
===========

Currently management software has no way to find out which device
types can be plugged in a machine, unless the machine is already
initialized.


Hi Eduardo,
Thank you for this interesting series. I think this is a problem
worth addressing.

Even after the machine is initialized, there's no way to map
existing bus types to supported device types unless management
software hardcodes the mapping between bus types and device
types.


Here I am a little lost.

We are going for machine => supported devices or
bus-type => supported devices?

Example: floppy support on q35 vs i440fx
----------------------------------------

There's no way for libvirt to find out that there's no floppy
controller on pc-q35-* machine-types by default.


Again "by default". So do we want to query the init state of a machine?
What devices are there? Or what devices *can be* there?

With this series, pc-i440fx-* will report "floppy" as a supported
device type, but pc-q35-* will not.

Example: Legacy PCI vs vs PCIe devices
--------------------------------------

Some devices require a PCIe bus to be available, others work on
both legacy PCI and PCIe, while others work only on a legacy PCI
bus.

Currently management software has no way to know which devices
can be added to a given machine, unless it hardcodes machine-type
names and device-types names.


Again it seems a double problem, machine => devices vs pci/pcie bus => devices.
The bus => devices match is not related to a machine type.

The Proposed Interface
======================

This series adds a new field to the output of 'query-machines':
'supported-device-types'. It will contain a list of QOM type
names, that can be used to find the list of device types that can
be plugged in the machine by default.

What do you mean "by default"? Without bridges or part of the machine itself?

 The type names reported on
the new field can then be used as the 'implements' argument on
the 'qom-list-types' command, to find out which device types can
be plugged on the machine.

Example output
--------------

  (QEMU) query-machines
  {
    "return": [
        [...]
        {
            "supported-device-types": [
                "sys-bus-device"


I don't know how "sys-bus-device" can help us... :)

            ],
            "cpu-max": 1,
            "hotpluggable-cpus": false,
            "name": "none"
        },
        [...]
        {
            "supported-device-types": [
                "sys-bus-device"
            ],
            "cpu-max": 1,
            "hotpluggable-cpus": false,
            "name": "xenpv"
        },
        [...]
        {
            "supported-device-types": [
                "sys-bus-device",
                "floppy",
                "i2c-slave",
                "pci-device",
                "isa-device",
                "ide-device"

Is don't know is this high level classification is useful,
here is an example:

   pvi-device is supported => then we look for all pci devices?
But what if some pci devices make sense on a machine type,
but not on another?



            ],
            "name": "pc-i440fx-2.8",
            "alias": "pc",
            "is-default": true,
            "cpu-max": 255,
            "hotpluggable-cpus": true
        },
        [...]
        {
            "supported-device-types": [
                "sys-bus-device",
                "floppy",
                "isa-device",
                "ide-device"
            ],
            "cpu-max": 1,
            "hotpluggable-cpus": true,
            "name": "isapc"
        },
        [...]
        {
            "supported-device-types": [
                "sys-bus-device",
                "floppy",
                "i2c-slave",
                "pci-device",
                "isa-device",
                "ide-device"
            ],
            "cpu-max": 128,
            "hotpluggable-cpus": true,
            "name": "xenfv"
        },
        [...]
        {
            "alias": "q35",
            "supported-device-types": [
                "sys-bus-device",
                "i2c-slave",
                "PCIE-device",
                "isa-device",
                "ide-device"
            ],
            "cpu-max": 288,
            "hotpluggable-cpus": true,
            "name": "pc-q35-2.8"
        },
        [...]
    ]
  }

Considered alternatives
=======================

Indirect mapping (machine => bus => device)
-------------------------------------------

This RFC implements a mechanism to implement ax
  machine-type => supported-device-types
mapping. An alternative solution I considered was to expose an
indirect mapping:
  machine-type => default-bus-types
followed by
  bus-type => supported-device-types.


As I previously stated, I don't know if it helps. bus-type
can support different devices on different archs.

But exposing only the resulting supported device-types list
imposes less restrictions on how the device and bus type
hierarchy is implemented inside QEMU. There's still a
  machine-type => bus-type => device-type
mapping implemented internally, but it is an implementation
detail on the current version, and not part of the
externally-visible interface.


Good, I personally don't like this "pass".

The Implementation
==================

This add a new field to MachineClass: default_bus_types, and a
new field to BusClass: supported_device_type.

The two fields are used to build the list of supported device
types for a given machine. On most cases, the normal QOM type
hierarchy is used to define the set of supported devices for a
bus. On the case of PCIe buses, a INTERFACE_PCIE_DEVICE interface
name was introduced, to indicate PCIe-capable devices.

This means we are duplicating information in some cases:

* BusClass::supported_device_type duplicates knowlege that is
  already encoded in DeviceClass::bus_type.

  To make sure both fields agree with each other, a new
  device_class_set_bus_type() wrapper was added, to perform
  additional validation.

* MachineClass::default_bus_type duplicates knowledge that is
  already encoded in the machine init function.

  To make sure the information is correct, a qmp-machine-info.py
  test case is added, that will validate the
  supported-device-types field based on the buses created by the
  machine.

* PCIDeviceClass::is_express and INTERFACE_PCIE_DEVICE
  both encode the same information about a PCI device class.

  A future version of this series may include a
  class_base_post_init hook that will allow TYPE_PCI_DEVICE to
  validate/update is_express and the interface list to ensure
  both are always consistent.

Test Code
---------

qdev-based test code for the new field was implemented in a
Python script.  Some extra support was implemented in
tests/Makefile.include, scripts/qemu.py and scripts/qtest.py to
allow the test to be implemented.

Limitations
===========

TYPE_SYS_BUS_DEVICE is too generic
----------------------------------

Currently all machines have a TYPE_SYS_BUS bus, meaning all
TYPE_SYS_BUS_DEVICE subclasses are reported as supported.


Agreed, this is a problem.

The current solution in this series is to report
TYPE_SYS_BUS_DEVICE as supported by all machines. But we could
gradually add arch-specific or machine-family-specific interface
names that can be used on devices that are meant to work with
only a subset of TYPE_SYS_BUS_DEVICE subclasses.

A future version of this series may remove TYPE_SYS_BUS_DEVICE
from the supported-device-types output, and return a
arch-specific or machine-family-specific interface name to
restrict management software to a subset of TYPE_SYS_BUS_DEVICE
subclasses.

PCI vs PCIe
-----------

Machines with PCIe buses will report INTERFACE_PCIE_DEVICE on
supported-device-types.

Machines with legacy PCI buses will report TYPE_PCI_DEVICE on
supported-device-types.

The problem with the current approach is that PCIe devices are
TYPE_PCI_DEVICE subclasses. The allows PCI device classes to
indicate they are PCIe-capable, but there's no obvious way to
indicate that a device is PCIe-only. This needs to be addressed
in a future version of this series.

Suggestions are welcome.


As we talked offline, I personally like an interface IPCIType
with a field having 3 possible values {pci/pcie/hybrid}

To understand how hybrid works we need some rules, like
"pci on pci bus/pcie on pcie bus"
"pcie on a non-root pcie bus/pcie otherwise

I don't think we'll have a lot of rules, simple boolean fields
for the interface should be enough.


This still does not solve the problem that some devices makes
sense only on a specific arch.


Incomplete bus lists on some machines
-------------------------------------

With this series, not all machines classes are changed to add the
full list of device types on the 'supported-device-types'. To
allow the code to be updated gradually, qmp-machine-info.py has a
STRICT_ARCHES variable, that will make the test code require a
complete device type list only on some architectures.

Out of scope: Configurable buses
--------------------------------

There's no way to map machine options like "usb=on|off" to
device-types or buses. I plan to propose a new interface that
allows machine options to be mapped to buses/device-types later.

Out of scope: Deciding where to plug devices
--------------------------------------------

Once management software discovers which devices can be plugged
to a machine, it still has to discover or define where devices
can/should/will be plugged. This is out of the scope of this
series.


That's a pitty :(
I was hoping this series will solve this issue. But if it prepares
the grounds for it is also a good step .



Thanks,
Marcel

Out of scope: Hotplug
---------------------

The proposed interface is supposed to help management software
find which device types can be used when creating the VM. Device
hotplug is out of the scope of this series. However, the new
'device-types' QOM property on bus objects could be used to find
out which device types can be plugged on the existing buses.

---
Cc: address@hidden
Cc: Laine Stump <address@hidden>

Eduardo Habkost (15):
  qemu.py: Make logging optional
  qtest.py: Support QTEST_LOG environment variable
  qtest.py: make logging optional
  qtest.py: Make 'binary' parameter optional
  tests: Add rules to non-gtester qtest test cases
  qdev: Add device_type field to BusClass
  machine: Add MachineClass::default_buses field
  qmp: Add 'supported-device-types' field to 'query-machines'
  pci: Introduce INTERFACE_PCIE_DEVICE interface name
  pc: Initialize default bus lists
  s390x: Initialize default bus lists
  arm: Initialize default bus lists
  mips: Initialize default bus lists
  ppc: Initialize default bus lists
  qdev: Add device_class_set_bus_type() function

 hw/arm/aspeed.c                    |   2 +
 hw/arm/collie.c                    |   1 +
 hw/arm/cubieboard.c                |   1 +
 hw/arm/exynos4_boards.c            |   5 ++
 hw/arm/gumstix.c                   |   7 ++
 hw/arm/highbank.c                  |   4 ++
 hw/arm/imx25_pdk.c                 |   1 +
 hw/arm/kzm.c                       |   1 +
 hw/arm/musicpal.c                  |   1 +
 hw/arm/nseries.c                   |   2 +
 hw/arm/palm.c                      |   1 +
 hw/arm/realview.c                  |   1 +
 hw/arm/spitz.c                     |  10 +++
 hw/arm/stellaris.c                 |   4 ++
 hw/audio/intel-hda.c               |   9 ++-
 hw/block/fdc.c                     |  17 +++--
 hw/block/nvme.c                    |   4 ++
 hw/char/virtio-serial-bus.c        |   3 +-
 hw/core/bus.c                      |   9 +++
 hw/core/machine.c                  |  18 ++++-
 hw/core/qdev.c                     |   8 +++
 hw/core/sysbus.c                   |   3 +-
 hw/i2c/core.c                      |   9 ++-
 hw/i386/pc_piix.c                  |  13 ++++
 hw/i386/pc_q35.c                   |   4 ++
 hw/ide/qdev.c                      |   3 +-
 hw/input/adb.c                     |   9 ++-
 hw/ipack/ipack.c                   |   9 ++-
 hw/isa/isa-bus.c                   |   3 +-
 hw/mips/mips_malta.c               |   7 ++
 hw/mips/mips_r4k.c                 |   2 +
 hw/misc/auxbus.c                   |   3 +-
 hw/net/e1000e.c                    |   4 ++
 hw/net/vmxnet3.c                   |   4 ++
 hw/pci-bridge/ioh3420.c            |   4 ++
 hw/pci-bridge/xio3130_downstream.c |   4 ++
 hw/pci/pci.c                       |  16 ++++-
 hw/ppc/e500plat.c                  |   3 +
 hw/ppc/mac_newworld.c              |   4 ++
 hw/ppc/mac_oldworld.c              |   3 +
 hw/ppc/mpc8544ds.c                 |   4 ++
 hw/ppc/ppc440_bamboo.c             |   1 +
 hw/ppc/prep.c                      |   4 ++
 hw/ppc/spapr_vio.c                 |   3 +-
 hw/s390x/css-bridge.c              |   2 +
 hw/s390x/event-facility.c          |   3 +-
 hw/s390x/s390-pci-bus.c            |   9 ++-
 hw/s390x/s390-virtio-ccw.c         |   6 ++
 hw/s390x/virtio-ccw.c              |   2 +-
 hw/scsi/megasas.c                  |   7 ++
 hw/scsi/scsi-bus.c                 |   3 +-
 hw/scsi/vmw_pvscsi.c               |   1 +
 hw/sd/core.c                       |   7 ++
 hw/sd/sd.c                         |   2 +-
 hw/ssi/ssi.c                       |   9 ++-
 hw/usb/bus.c                       |   3 +-
 hw/usb/dev-smartcard-reader.c      |   9 ++-
 hw/usb/hcd-xhci.c                  |   4 ++
 hw/vfio/pci.c                      |   4 ++
 hw/virtio/virtio-bus.c             |   1 +
 hw/virtio/virtio-pci.c             |   4 ++
 hw/virtio/virtio.c                 |   2 +-
 include/hw/boards.h                |   5 ++
 include/hw/pci/pci.h               |   3 +
 include/hw/qdev-core.h             |   4 ++
 qapi-schema.json                   |   9 ++-
 scripts/qemu.py                    |  25 +++++--
 scripts/qtest.py                   |  15 +++-
 tests/Makefile.include             |  39 ++++++++++-
 tests/qmp-machine-info.py          | 138 +++++++++++++++++++++++++++++++++++++
 vl.c                               |  11 +++
 71 files changed, 518 insertions(+), 37 deletions(-)
 create mode 100755 tests/qmp-machine-info.py





reply via email to

[Prev in Thread] Current Thread [Next in Thread]