[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH for-2.8] target-*: Fix typos found by codespell
From: |
Stefan Weil |
Subject: |
[Qemu-devel] [PATCH for-2.8] target-*: Fix typos found by codespell |
Date: |
Sat, 19 Nov 2016 20:50:55 +0100 |
Signed-off-by: Stefan Weil <address@hidden>
---
target-i386/translate.c | 2 +-
target-m68k/translate.c | 6 +++---
target-ppc/cpu.h | 2 +-
target-ppc/excp_helper.c | 2 +-
target-ppc/int_helper.c | 2 +-
target-ppc/mmu-hash64.c | 2 +-
target-s390x/cpu_models.c | 2 +-
target-s390x/cpu_models.h | 2 +-
8 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/target-i386/translate.c b/target-i386/translate.c
index 324103c..d8ca6df 100644
--- a/target-i386/translate.c
+++ b/target-i386/translate.c
@@ -6701,7 +6701,7 @@ static target_ulong disas_insn(CPUX86State *env,
DisasContext *s,
if (s->prefix & PREFIX_LOCK) {
switch (op) {
case 0: /* bt */
- /* Needs no atomic ops; we surpressed the normal
+ /* Needs no atomic ops; we suppressed the normal
memory load for LOCK above so do it now. */
gen_op_ld_v(s, ot, cpu_T0, cpu_A0);
break;
diff --git a/target-m68k/translate.c b/target-m68k/translate.c
index 9ad974f..cab2d58 100644
--- a/target-m68k/translate.c
+++ b/target-m68k/translate.c
@@ -1579,7 +1579,7 @@ DISAS_INSN(negx)
gen_flush_flags(s); /* compute old Z */
- /* Perform substract with borrow.
+ /* Perform subtract with borrow.
* (X, N) = -(src + X);
*/
@@ -2067,7 +2067,7 @@ static inline void gen_subx(DisasContext *s, TCGv src,
TCGv dest, int opsize)
gen_flush_flags(s); /* compute old Z */
- /* Perform substract with borrow.
+ /* Perform subtract with borrow.
* (X, N) = dest - (src + X);
*/
@@ -2077,7 +2077,7 @@ static inline void gen_subx(DisasContext *s, TCGv src,
TCGv dest, int opsize)
gen_ext(QREG_CC_N, QREG_CC_N, opsize, 1);
tcg_gen_andi_i32(QREG_CC_X, QREG_CC_X, 1);
- /* Compute signed-overflow for substract. */
+ /* Compute signed-overflow for subtract. */
tcg_gen_xor_i32(QREG_CC_V, QREG_CC_N, dest);
tcg_gen_xor_i32(tmp, dest, src);
diff --git a/target-ppc/cpu.h b/target-ppc/cpu.h
index 1c90adb..f65d318 100644
--- a/target-ppc/cpu.h
+++ b/target-ppc/cpu.h
@@ -2234,7 +2234,7 @@ enum {
PPC_INTERRUPT_CDOORBELL, /* Critical doorbell interrupt */
PPC_INTERRUPT_DOORBELL, /* Doorbell interrupt */
PPC_INTERRUPT_PERFM, /* Performance monitor interrupt */
- PPC_INTERRUPT_HMI, /* Hypervisor Maintainance interrupt */
+ PPC_INTERRUPT_HMI, /* Hypervisor Maintenance interrupt */
PPC_INTERRUPT_HDOORBELL, /* Hypervisor Doorbell interrupt */
};
diff --git a/target-ppc/excp_helper.c b/target-ppc/excp_helper.c
index 93369d4..678e125 100644
--- a/target-ppc/excp_helper.c
+++ b/target-ppc/excp_helper.c
@@ -139,7 +139,7 @@ static inline void powerpc_excp(PowerPCCPU *cpu, int
excp_model, int excp)
}
}
- /* Exception targetting modifiers
+ /* Exception targeting modifiers
*
* LPES0 is supported on POWER7/8
* LPES1 is not supported (old iSeries mode)
diff --git a/target-ppc/int_helper.c b/target-ppc/int_helper.c
index 9ac204a..5d4a571 100644
--- a/target-ppc/int_helper.c
+++ b/target-ppc/int_helper.c
@@ -155,7 +155,7 @@ target_ulong helper_cnttzw(target_ulong t)
/* if x = 0xab, returns 0xababababababababa */
#define pattern(x) (((x) & 0xff) * (~(target_ulong)0 / 0xff))
-/* substract 1 from each byte, and with inverse, check if MSB is set at each
+/* subtract 1 from each byte, and with inverse, check if MSB is set at each
* byte.
* i.e. ((0x00 - 0x01) & ~(0x00)) & 0x80
* (0xFF & 0xFF) & 0x80 = 0x80 (zero found)
diff --git a/target-ppc/mmu-hash64.c b/target-ppc/mmu-hash64.c
index fdb7a78..4f5d9f6 100644
--- a/target-ppc/mmu-hash64.c
+++ b/target-ppc/mmu-hash64.c
@@ -691,7 +691,7 @@ int ppc_hash64_handle_mmu_fault(PowerPCCPU *cpu, vaddr
eaddr,
/* Note on LPCR usage: 970 uses HID4, but our special variant
* of store_spr copies relevant fields into env->spr[SPR_LPCR].
- * Similarily we filter unimplemented bits when storing into
+ * Similarly we filter unimplemented bits when storing into
* LPCR depending on the MMU version. This code can thus just
* use the LPCR "as-is".
*/
diff --git a/target-s390x/cpu_models.c b/target-s390x/cpu_models.c
index c1e729d..a4d46f3 100644
--- a/target-s390x/cpu_models.c
+++ b/target-s390x/cpu_models.c
@@ -38,7 +38,7 @@
}
/*
- * CPU definiton list in order of release. For now, base features of a
+ * CPU definition list in order of release. For now, base features of a
* following release are always a subset of base features of the previous
* release. Same is correct for the other feature sets.
* A BC release always follows the corresponding EC release.
diff --git a/target-s390x/cpu_models.h b/target-s390x/cpu_models.h
index 136a602..b76ea54 100644
--- a/target-s390x/cpu_models.h
+++ b/target-s390x/cpu_models.h
@@ -23,7 +23,7 @@ typedef struct S390CPUDef {
uint8_t gen; /* hw generation identification */
uint16_t type; /* cpu type identification */
uint8_t ec_ga; /* EC GA version (on which also the BC is based) */
- uint8_t mha_pow; /* Maximum Host Adress Power, mha = 2^pow-1 */
+ uint8_t mha_pow; /* Maximum Host Address Power, mha = 2^pow-1 */
uint32_t hmfai; /* hypervisor-managed facilities */
/* base/min features, must never be changed between QEMU versions */
S390FeatBitmap base_feat;
--
2.10.2
- [Qemu-devel] [PATCH for-2.8] target-*: Fix typos found by codespell,
Stefan Weil <=