qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v5 05/10] hcd-xhci: change behaviour of msix switch


From: Cao jin
Subject: [Qemu-devel] [PATCH v5 05/10] hcd-xhci: change behaviour of msix switch
Date: Thu, 3 Nov 2016 12:06:32 +0800

Resolve the TODO, msix=auto means msix on; if user specify msix=on,
then device creation fail on msix_init failure.

CC: Gerd Hoffmann <address@hidden>
CC: Michael S. Tsirkin <address@hidden>
CC: Markus Armbruster <address@hidden>
CC: Marcel Apfelbaum <address@hidden>

Reviewed-by: Gerd Hoffmann <address@hidden>
Reviewed-by: Markus Armbruster <address@hidden>
Signed-off-by: Cao jin <address@hidden>
---
 hw/usb/hcd-xhci.c | 35 ++++++++++++++++++++++++-----------
 1 file changed, 24 insertions(+), 11 deletions(-)

diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 05dc944..4767045 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -3636,12 +3636,14 @@ static void usb_xhci_realize(struct PCIDevice *dev, 
Error **errp)
     if (xhci->numintrs < 1) {
         xhci->numintrs = 1;
     }
+
     if (xhci->numslots > MAXSLOTS) {
         xhci->numslots = MAXSLOTS;
     }
     if (xhci->numslots < 1) {
         xhci->numslots = 1;
     }
+
     if (xhci_get_flag(xhci, XHCI_FLAG_ENABLE_STREAMS)) {
         xhci->max_pstreams_mask = 7; /* == 256 primary streams */
     } else {
@@ -3666,6 +3668,28 @@ static void usb_xhci_realize(struct PCIDevice *dev, 
Error **errp)
     }
 
     memory_region_init(&xhci->mem, OBJECT(xhci), "xhci", LEN_REGS);
+    if (xhci->msix != ON_OFF_AUTO_OFF) {
+        ret = msix_init(dev, xhci->numintrs,
+                        &xhci->mem, 0, OFF_MSIX_TABLE,
+                        &xhci->mem, 0, OFF_MSIX_PBA,
+                        0x90, &err);
+        /* Any error other than -ENOTSUP(board's MSI support is broken)
+         * is a programming error */
+        assert(!ret || ret == -ENOTSUP);
+        if (ret && xhci->msix == ON_OFF_AUTO_ON) {
+            /* Can't satisfy user's explicit msix=on request, fail */
+            error_append_hint(&err, "You have to use msix=auto (default) or "
+                    "msix=off with this machine type.\n");
+            /* No instance_finalize method, need to free the resource here */
+            object_unref(OBJECT(&xhci->mem));
+            error_propagate(errp, err);
+            return;
+        }
+        assert(!err || xhci->msix == ON_OFF_AUTO_AUTO);
+        /* With msix=auto, we fall back to MSI off silently */
+        error_free(err);
+    }
+
     memory_region_init_io(&xhci->mem_cap, OBJECT(xhci), &xhci_cap_ops, xhci,
                           "capabilities", LEN_CAP);
     memory_region_init_io(&xhci->mem_oper, OBJECT(xhci), &xhci_oper_ops, xhci,
@@ -3701,17 +3725,6 @@ static void usb_xhci_realize(struct PCIDevice *dev, 
Error **errp)
         ret = pcie_endpoint_cap_init(dev, 0xa0);
         assert(ret >= 0);
     }
-
-    if (xhci->msix != ON_OFF_AUTO_OFF) {
-        /* TODO check for errors, and should fail when msix=on */
-        ret = msix_init(dev, xhci->numintrs,
-                        &xhci->mem, 0, OFF_MSIX_TABLE,
-                        &xhci->mem, 0, OFF_MSIX_PBA,
-                        0x90, &err);
-        if (ret) {
-            error_report_err(err);
-        }
-    }
 }
 
 static void usb_xhci_exit(PCIDevice *dev)
-- 
2.1.0






reply via email to

[Prev in Thread] Current Thread [Next in Thread]