[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 1/4] nvdimm acpi: prebuild nvdimm devices for
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v3 1/4] nvdimm acpi: prebuild nvdimm devices for available slots |
Date: |
Tue, 1 Nov 2016 16:16:59 +0100 |
On Sat, 29 Oct 2016 00:35:37 +0800
Xiao Guangrong <address@hidden> wrote:
> For each NVDIMM present or intended to be supported by platform,
> platform firmware also exposes an ACPI Namespace Device under
> the root device
>
> So it builds nvdimm devices for all slots to support vNVDIMM hotplug
>
> Reviewed-by: Stefan Hajnoczi <address@hidden>
> Signed-off-by: Xiao Guangrong <address@hidden>
> ---
> hw/acpi/nvdimm.c | 41 ++++++++++++++++++++++++-----------------
> hw/i386/acpi-build.c | 2 +-
> include/hw/mem/nvdimm.h | 3 ++-
> 3 files changed, 27 insertions(+), 19 deletions(-)
>
> diff --git a/hw/acpi/nvdimm.c b/hw/acpi/nvdimm.c
> index bb896c9..b8a2e62 100644
> --- a/hw/acpi/nvdimm.c
> +++ b/hw/acpi/nvdimm.c
> @@ -961,12 +961,11 @@ static void nvdimm_build_device_dsm(Aml *dev, uint32_t
> handle)
> aml_append(dev, method);
> }
>
> -static void nvdimm_build_nvdimm_devices(GSList *device_list, Aml *root_dev)
> +static void nvdimm_build_nvdimm_devices(Aml *root_dev, uint32_t ram_slots)
> {
> - for (; device_list; device_list = device_list->next) {
> - DeviceState *dev = device_list->data;
> - int slot = object_property_get_int(OBJECT(dev), PC_DIMM_SLOT_PROP,
> - NULL);
> + uint32_t slot;
> +
> + for (slot = 0; slot < ram_slots; slot++) {
> uint32_t handle = nvdimm_slot_to_handle(slot);
> Aml *nvdimm_dev;
>
> @@ -987,9 +986,9 @@ static void nvdimm_build_nvdimm_devices(GSList
> *device_list, Aml *root_dev)
> }
> }
>
> -static void nvdimm_build_ssdt(GSList *device_list, GArray *table_offsets,
> - GArray *table_data, BIOSLinker *linker,
> - GArray *dsm_dma_arrea)
> +static void nvdimm_build_ssdt(GArray *table_offsets, GArray *table_data,
> + BIOSLinker *linker, GArray *dsm_dma_arrea,
> + uint32_t ram_slots)
> {
> Aml *ssdt, *sb_scope, *dev;
> int mem_addr_offset, nvdimm_ssdt;
> @@ -1021,7 +1020,7 @@ static void nvdimm_build_ssdt(GSList *device_list,
> GArray *table_offsets,
> /* 0 is reserved for root device. */
> nvdimm_build_device_dsm(dev, 0);
>
> - nvdimm_build_nvdimm_devices(device_list, dev);
> + nvdimm_build_nvdimm_devices(dev, ram_slots);
>
> aml_append(sb_scope, dev);
> aml_append(ssdt, sb_scope);
> @@ -1046,17 +1045,25 @@ static void nvdimm_build_ssdt(GSList *device_list,
> GArray *table_offsets,
> }
>
> void nvdimm_build_acpi(GArray *table_offsets, GArray *table_data,
> - BIOSLinker *linker, GArray *dsm_dma_arrea)
> + BIOSLinker *linker, GArray *dsm_dma_arrea,
> + uint32_t ram_slots)
> {
> GSList *device_list;
>
> - /* no NVDIMM device is plugged. */
> device_list = nvdimm_get_plugged_device_list();
> - if (!device_list) {
> - return;
> +
> + /* NVDIMM device is plugged. */
> + if (device_list) {
> + nvdimm_build_nfit(device_list, table_offsets, table_data, linker);
> + g_slist_free(device_list);
> + }
> +
> + /*
> + * NVDIMM device is allowed to be plugged only if there is available
> + * slot.
> + */
> + if (ram_slots) {
put this check before assigning to device_list
and bail out early if ram slots 0 as there is no point in proceeding further
> + nvdimm_build_ssdt(table_offsets, table_data, linker, dsm_dma_arrea,
> + ram_slots);
> }
after that you'd just keep the hunk below unchanged,
which would simplify the patch
> - nvdimm_build_nfit(device_list, table_offsets, table_data, linker);
> - nvdimm_build_ssdt(device_list, table_offsets, table_data, linker,
> - dsm_dma_arrea);
> - g_slist_free(device_list);
> }
> diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
> index e999654..6ae4769 100644
> --- a/hw/i386/acpi-build.c
> +++ b/hw/i386/acpi-build.c
> @@ -2767,7 +2767,7 @@ void acpi_build(AcpiBuildTables *tables, MachineState
> *machine)
> }
> if (pcms->acpi_nvdimm_state.is_enabled) {
> nvdimm_build_acpi(table_offsets, tables_blob, tables->linker,
> - pcms->acpi_nvdimm_state.dsm_mem);
> + pcms->acpi_nvdimm_state.dsm_mem,
> machine->ram_slots);
> }
>
> /* Add tables supplied by user (if any) */
> diff --git a/include/hw/mem/nvdimm.h b/include/hw/mem/nvdimm.h
> index 1cfe9e0..63a2b20 100644
> --- a/include/hw/mem/nvdimm.h
> +++ b/include/hw/mem/nvdimm.h
> @@ -112,5 +112,6 @@ typedef struct AcpiNVDIMMState AcpiNVDIMMState;
> void nvdimm_init_acpi_state(AcpiNVDIMMState *state, MemoryRegion *io,
> FWCfgState *fw_cfg, Object *owner);
> void nvdimm_build_acpi(GArray *table_offsets, GArray *table_data,
> - BIOSLinker *linker, GArray *dsm_dma_arrea);
> + BIOSLinker *linker, GArray *dsm_dma_arrea,
> + uint32_t ram_slots);
> #endif
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v3 1/4] nvdimm acpi: prebuild nvdimm devices for available slots,
Igor Mammedov <=