[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 6/6] aspeed: add support for the SMC segment reg
From: |
Andrew Jeffery |
Subject: |
Re: [Qemu-devel] [PATCH 6/6] aspeed: add support for the SMC segment registers |
Date: |
Wed, 05 Oct 2016 10:23:18 +1030 |
On Tue, 2016-09-27 at 13:57 +0200, Cédric Le Goater wrote:
> The SMC controller on the Aspeed SoC has a set of registers to
> configure the mapping of each flash module in the SoC address
> space. Writing to these registers triggers a remap of the memory
> region and the spec requires a certain number of checks before doing
> so.
>
> Signed-off-by: Cédric Le Goater <address@hidden>
Reviewed-by: Andrew Jeffery <address@hidden>
> ---
> hw/ssi/aspeed_smc.c | 135
> ++++++++++++++++++++++++++++++++++++++++++++++++++--
> 1 file changed, 130 insertions(+), 5 deletions(-)
>
> diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
> index ecf39ccfde0e..6e8403ebc246 100644
> --- a/hw/ssi/aspeed_smc.c
> +++ b/hw/ssi/aspeed_smc.c
> @@ -79,10 +79,10 @@
>
> /* CEx Segment Address Register */
> #define R_SEG_ADDR0 (0x30 / 4)
> -#define SEG_SIZE_SHIFT 24 /* 8MB units */
> -#define SEG_SIZE_MASK 0x7f
> +#define SEG_END_SHIFT 24 /* 8MB units */
> +#define SEG_END_MASK 0xff
Was this a bug? The top bit is reserved as 0 in the 2500 datasheet, but
valid as your change suggests in the 2400.
> #define SEG_START_SHIFT 16 /* address bit [A29-A23] */
> -#define SEG_START_MASK 0x7f
> +#define SEG_START_MASK 0xff
As above.
> #define R_SEG_ADDR1 (0x34 / 4)
> #define R_SEG_ADDR2 (0x38 / 4)
> #define R_SEG_ADDR3 (0x3C / 4)
> @@ -135,8 +135,7 @@
> /*
> * Default segments mapping addresses and size for each slave per
> * controller. These can be changed when board is initialized with the
> - * Segment Address Registers but they don't seem do be used on the
> - * field.
> + * Segment Address Registers.
> */
> static const AspeedSegments aspeed_segments_legacy[] = {
> { 0x10000000, 32 * 1024 * 1024 },
> @@ -191,6 +190,118 @@ static const AspeedSMCController controllers[] = {
> ASPEED_SOC_SPI2_FLASH_BASE, 0x8000000 },
> };
>
> +/*
> + * The Segment Register uses a 8MB unit to encode the start address
> + * and the end address of the mapping window of a flash SPI slave :
> + *
> + * | byte 1 | byte 2 | byte 3 | byte 4 |
> + * +--------+--------+--------+--------+
> + * | end | start | 0 | 0 |
> + *
> + */
> +static inline uint32_t aspeed_smc_segment_to_reg(const AspeedSegments *seg)
> +{
> + uint32_t reg = 0;
> + reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT;
> + reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT;
> + return reg;
> +}
> +
> +static inline void aspeed_smc_reg_to_segment(uint32_t reg, AspeedSegments
> *seg)
> +{
> + seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23;
> + seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr;
> +}
> +
> +static bool aspeed_smc_flash_overlap(const AspeedSMCState *s,
> + const AspeedSegments *new,
> + int cs)
> +{
> + AspeedSegments seg;
> + int i;
> +
> + for (i = 0; i < s->ctrl->max_slaves; i++) {
> + if (i == cs) {
> + continue;
> + }
> +
> + aspeed_smc_reg_to_segment(s->regs[R_SEG_ADDR0 + i], &seg);
> +
> + if (new->addr + new->size > seg.addr &&
> + new->addr < seg.addr + seg.size) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment CS%d [ 0x%"
> + HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with "
> + "CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
> + s->ctrl->name, cs, new->addr, new->addr +
> new->size,
> + i, seg.addr, seg.addr + seg.size);
> + return true;
> + }
> + }
> + return false;
> +}
> +
> +static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs,
> + uint64_t new)
> +{
> + AspeedSMCFlash *fl = &s->flashes[cs];
> + AspeedSegments seg;
> +
> + aspeed_smc_reg_to_segment(new, &seg);
> +
> + /* The start address of CS0 is read-only */
> + if (cs == 0 && seg.addr != s->ctrl->flash_window_base) {
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Tried to change CS0 start address to 0x%"
> + HWADDR_PRIx "\n", s->ctrl->name, seg.addr);
> + return;
> + }
> +
> + /*
> + * The end address of the AST2500 spi controllers is also
> + * read-only.
> + */
> + if ((s->ctrl->segments == aspeed_segments_ast2500_spi1 ||
> + s->ctrl->segments == aspeed_segments_ast2500_spi2) &&
> + cs == s->ctrl->max_slaves &&
> + seg.addr + seg.size != s->ctrl->segments[cs].addr +
> + s->ctrl->segments[cs].size) {
> + qemu_log_mask(LOG_GUEST_ERROR,
> + "%s: Tried to change CS%d end address to 0x%"
> + HWADDR_PRIx "\n", s->ctrl->name, cs, seg.addr);
> + return;
> + }
> +
> + /* Keep the segment in the overall flash window */
> + if (seg.addr + seg.size <= s->ctrl->flash_window_base ||
> + seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is invalid
> : "
> + "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
> + s->ctrl->name, cs, seg.addr, seg.addr + seg.size);
> + return;
> + }
> +
> + /* Check start address vs. alignment */
> + if (seg.addr % seg.size) {
> + qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is not "
> + "aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n",
> + s->ctrl->name, cs, seg.addr, seg.addr + seg.size);
> + }
> +
> + /* And segments should not overlap */
> + if (aspeed_smc_flash_overlap(s, &seg, cs)) {
> + return;
> + }
> +
> + /* All should be fine now to move the region */
> + memory_region_transaction_begin();
> + memory_region_set_size(&fl->mmio, seg.size);
> + memory_region_set_address(&fl->mmio, seg.addr -
> s->ctrl->flash_window_base);
> + memory_region_set_enabled(&fl->mmio, true);
> + memory_region_transaction_commit();
> +
> + s->regs[R_SEG_ADDR0 + cs] = new;
> +}
> +
> static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr,
> unsigned size)
> {
> @@ -314,6 +425,12 @@ static void aspeed_smc_reset(DeviceState *d)
> s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE;
> }
>
> + /* setup default segment register values for all */
> + for (i = 0; i < s->ctrl->max_slaves; ++i) {
> + s->regs[R_SEG_ADDR0 + i] =
> + aspeed_smc_segment_to_reg(&s->ctrl->segments[i]);
> + }
> +
> aspeed_smc_update_cs(s);
> }
>
> @@ -334,6 +451,7 @@ static uint64_t aspeed_smc_read(void *opaque, hwaddr
> addr, unsigned int size)
> addr == s->r_timings ||
> addr == s->r_ce_ctrl ||
> addr == R_INTR_CTRL ||
> + (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) ||
> (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs)) {
> return s->regs[addr];
> } else {
> @@ -365,6 +483,13 @@ static void aspeed_smc_write(void *opaque, hwaddr addr,
> uint64_t data,
> } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) {
> s->regs[addr] = value;
> aspeed_smc_update_cs(s);
> + } else if (addr >= R_SEG_ADDR0 &&
> + addr < R_SEG_ADDR0 + s->ctrl->max_slaves) {
> + int cs = addr - R_SEG_ADDR0;
> +
> + if (value != s->regs[R_SEG_ADDR0 + cs]) {
> + aspeed_smc_flash_set_segment(s, cs, value);
> + }
> } else {
> qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n",
> __func__, addr);
signature.asc
Description: This is a digitally signed message part
- Re: [Qemu-devel] [PATCH 6/6] aspeed: add support for the SMC segment registers,
Andrew Jeffery <=