[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v7 5/8] hw/intc/arm_gicv3_its: Implement support for
From: |
Eric Auger |
Subject: |
[Qemu-devel] [PATCH v7 5/8] hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulation |
Date: |
Fri, 23 Sep 2016 09:43:34 +0200 |
From: Pavel Fedin <address@hidden>
The ITS control frame is in-kernel emulated while accesses to the
GITS_TRANSLATER are mediated through the KVM_SIGNAL_MSI ioctl (MSI
direct MSI injection advertised by the CAP_SIGNAL_MSI capability)
the kvm_gsi_direct_mapping is explicitly set to false to emphasize the
difference with GICv2M. Direct mapping cannot work with ITS since
the content of the MSI data is not the target interrupt ID but an
eventd id.
GSI routing is advertised (kvm_gsi_routing_allowed) as well as
msi/irqfd signaling (kvm_msi_via_irqfd_allowed).
The MSI frame (GITS_TRANSLATER) absolute GPA is computed on first
kvm_its_send_msi() call. It is then passed through KVM_SIGNAL_MSI
ioctl.
Signed-off-by: Pavel Fedin <address@hidden>
Signed-off-by: Eric Auger <address@hidden>
---
v6 -> v7:
- remove the notifier and compute the translater GPA on first
kvm_its_send_msi(), as suggested by Peter
- fix the memory region reference leak
- fix a comment typo
v5 -> v6:
- now the kernel ITS init sequence has changed let's use the
kvm_arm_register_device to set the CTRL frame base address
- use extract64()
- add migration blocker
- remove kvm_gsi_routing_allowed setting which is set in GICv3
KVM device realize
- add migration_blocker
v3 -> v4:
- include "qemu/osdep.h" and "qapi/error.h"
- rename KVM_VGIC_V3_ADDR_TYPE_ITS into KVM_VGIC_ITS_ADDR_TYPE
- reword commit message
- change kvm_msi_via_irqfd_allowed definition (attached to irqfd dynamic
availability + MSI controller availability)
- create the ITS KVM device (previously abstracted by the GICv3 KVM device)
- init sequence changed
- absolute GITS_TRANSLATER GPA stored
Signed-off-by: Eric Auger <address@hidden>
---
hw/intc/Makefile.objs | 1 +
hw/intc/arm_gicv3_its_kvm.c | 121 ++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 122 insertions(+)
create mode 100644 hw/intc/arm_gicv3_its_kvm.c
diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
index 23a39f7..9cca280 100644
--- a/hw/intc/Makefile.objs
+++ b/hw/intc/Makefile.objs
@@ -22,6 +22,7 @@ common-obj-$(CONFIG_OPENPIC) += openpic.o
obj-$(CONFIG_APIC) += apic.o apic_common.o
obj-$(CONFIG_ARM_GIC_KVM) += arm_gic_kvm.o
obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_kvm.o
+obj-$(call land,$(CONFIG_ARM_GIC_KVM),$(TARGET_AARCH64)) += arm_gicv3_its_kvm.o
obj-$(CONFIG_STELLARIS) += armv7m_nvic.o
obj-$(CONFIG_EXYNOS4) += exynos4210_gic.o exynos4210_combiner.o
obj-$(CONFIG_GRLIB) += grlib_irqmp.o
diff --git a/hw/intc/arm_gicv3_its_kvm.c b/hw/intc/arm_gicv3_its_kvm.c
new file mode 100644
index 0000000..fc246e0
--- /dev/null
+++ b/hw/intc/arm_gicv3_its_kvm.c
@@ -0,0 +1,121 @@
+/*
+ * KVM-based ITS implementation for a GICv3-based system
+ *
+ * Copyright (c) 2015 Samsung Electronics Co., Ltd.
+ * Written by Pavel Fedin <address@hidden>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "hw/intc/arm_gicv3_its_common.h"
+#include "sysemu/sysemu.h"
+#include "sysemu/kvm.h"
+#include "kvm_arm.h"
+#include "migration/migration.h"
+
+#define TYPE_KVM_ARM_ITS "arm-its-kvm"
+#define KVM_ARM_ITS(obj) OBJECT_CHECK(GICv3ITSState, (obj), TYPE_KVM_ARM_ITS)
+
+static int kvm_its_send_msi(GICv3ITSState *s, uint32_t value, uint16_t devid)
+{
+ struct kvm_msi msi;
+
+ if (unlikely(!s->translater_gpa_known)) {
+ MemoryRegion *mr = &s->iomem_its_translation;
+ MemoryRegionSection mrs;
+
+ mrs = memory_region_find(mr, 0, 1);
+ memory_region_unref(mrs.mr);
+ s->gits_translater_gpa = mrs.offset_within_address_space + 0x40;
+ s->translater_gpa_known = true;
+ }
+
+ msi.address_lo = extract64(s->gits_translater_gpa, 0, 32);
+ msi.address_hi = extract64(s->gits_translater_gpa, 32, 32);
+ msi.data = le32_to_cpu(value);
+ msi.flags = KVM_MSI_VALID_DEVID;
+ msi.devid = devid;
+ memset(msi.pad, 0, sizeof(msi.pad));
+
+ return kvm_vm_ioctl(kvm_state, KVM_SIGNAL_MSI, &msi);
+}
+
+static void kvm_arm_its_realize(DeviceState *dev, Error **errp)
+{
+ GICv3ITSState *s = ARM_GICV3_ITS_COMMON(dev);
+
+ s->dev_fd = kvm_create_device(kvm_state, KVM_DEV_TYPE_ARM_VGIC_ITS, false);
+ if (s->dev_fd < 0) {
+ error_setg_errno(errp, -s->dev_fd, "error creating in-kernel ITS");
+ return;
+ }
+
+ /* explicit init of the ITS */
+ kvm_device_access(s->dev_fd, KVM_DEV_ARM_VGIC_GRP_CTRL,
+ KVM_DEV_ARM_VGIC_CTRL_INIT, NULL, true);
+
+ /* register the base address */
+ kvm_arm_register_device(&s->iomem_its_cntrl, -1, KVM_DEV_ARM_VGIC_GRP_ADDR,
+ KVM_VGIC_ITS_ADDR_TYPE, s->dev_fd);
+
+ gicv3_its_init_mmio(s, NULL);
+
+ /*
+ * Block migration of a KVM GICv3 ITS device: the API for saving and
+ * restoring the state in the kernel is not yet available
+ */
+ error_setg(&s->migration_blocker, "vITS migration is not implemented");
+ migrate_add_blocker(s->migration_blocker);
+
+ kvm_msi_use_devid = true;
+ kvm_gsi_direct_mapping = false;
+ kvm_msi_via_irqfd_allowed = kvm_irqfds_enabled();
+}
+
+static void kvm_arm_its_init(Object *obj)
+{
+ GICv3ITSState *s = KVM_ARM_ITS(obj);
+
+ object_property_add_link(obj, "parent-gicv3",
+ "kvm-arm-gicv3", (Object **)&s->gicv3,
+ object_property_allow_set_link,
+ OBJ_PROP_LINK_UNREF_ON_RELEASE,
+ &error_abort);
+}
+
+static void kvm_arm_its_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ GICv3ITSCommonClass *icc = ARM_GICV3_ITS_COMMON_CLASS(klass);
+
+ dc->realize = kvm_arm_its_realize;
+ icc->send_msi = kvm_its_send_msi;
+}
+
+static const TypeInfo kvm_arm_its_info = {
+ .name = TYPE_KVM_ARM_ITS,
+ .parent = TYPE_ARM_GICV3_ITS_COMMON,
+ .instance_size = sizeof(GICv3ITSState),
+ .instance_init = kvm_arm_its_init,
+ .class_init = kvm_arm_its_class_init,
+};
+
+static void kvm_arm_its_register_types(void)
+{
+ type_register_static(&kvm_arm_its_info);
+}
+
+type_init(kvm_arm_its_register_types)
--
2.5.5
- [Qemu-devel] [PATCH v7 0/8] vITS support, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 1/8] hw/intc/arm_gic(v3)_kvm: Initialize gsi routing, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 2/8] hw/intc/arm_gicv3_its: Implement ITS base class, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 3/8] target-arm: move gicv3_class_name from machine to kvm_arm.h, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 4/8] kvm-all: Pass requester ID to MSI routing functions, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 5/8] hw/intc/arm_gicv3_its: Implement support for in-kernel ITS emulation,
Eric Auger <=
- [Qemu-devel] [PATCH v7 7/8] ACPI: Add GIC Interrupt Translation Service Structure definition, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 6/8] arm/virt: Add ITS to the virt board, Eric Auger, 2016/09/23
- [Qemu-devel] [PATCH v7 8/8] ARM: Virt: ACPI: Add GIC ITS description in ACPI MADT table, Eric Auger, 2016/09/23
- Re: [Qemu-devel] [PATCH v7 0/8] vITS support, Peter Maydell, 2016/09/29