[Qemu-devel] [PATCH 3/5] intel_iommu: pass whole remapped addresses to apic

[Radim Krčmář]

The MMIO interface to APIC only allowed 8 bit addresses, which is not
enough for 32 bit addresses from EIM remapping.
Intel stored upper 24 bits in the high MSI address, so use the same
technique. The technique is also used in KVM MSI interface.
Other APICs are unlikely to handle those upper bits.

Signed-off-by: Radim Krčmář <address@hidden>
---
 hw/i386/intel_iommu.c | 18 +++++++-----------
 1 file changed, 7 insertions(+), 11 deletions(-)

diff --git a/hw/i386/intel_iommu.c b/hw/i386/intel_iommu.c
index 28c31a2cdfa3..1a0961e5cf6a 100644
--- a/hw/i386/intel_iommu.c
+++ b/hw/i386/intel_iommu.c
@@ -31,6 +31,7 @@
 #include "hw/i386/x86-iommu.h"
 #include "hw/pci-host/q35.h"
 #include "sysemu/kvm.h"
+#include "hw/i386/apic_internal.h"
 
 /*#define DEBUG_INTEL_IOMMU*/
 #ifdef DEBUG_INTEL_IOMMU
@@ -279,18 +280,16 @@ static void vtd_update_iotlb(IntelIOMMUState *s, uint16_t 
source_id,
 static void vtd_generate_interrupt(IntelIOMMUState *s, hwaddr mesg_addr_reg,
                                    hwaddr mesg_data_reg)
 {
-    hwaddr addr;
-    uint32_t data;
+    MSIMessage msi;
 
     assert(mesg_data_reg < DMAR_REG_SIZE);
     assert(mesg_addr_reg < DMAR_REG_SIZE);
 
-    addr = vtd_get_long_raw(s, mesg_addr_reg);
-    data = vtd_get_long_raw(s, mesg_data_reg);
+    msi.address = vtd_get_long_raw(s, mesg_addr_reg);
+    msi.data = vtd_get_long_raw(s, mesg_data_reg);
 
     VTD_DPRINTF(FLOG, "msi: addr 0x%"PRIx64 " data 0x%"PRIx32, addr, data);
-    address_space_stl_le(&address_space_memory, addr, data,
-                         MEMTXATTRS_UNSPECIFIED, NULL);
+    apic_get_class()->send_msi(&msi);
 }
 
 /* Generate a fault event to software via MSI if conditions are met.
@@ -2127,6 +2126,7 @@ static void vtd_generate_msi_message(VTDIrq *irq, 
MSIMessage *msg_out)
     msg.dest_mode = irq->dest_mode;
     msg.redir_hint = irq->redir_hint;
     msg.dest = irq->dest;
+    msg.__addr_hi = irq->dest & 0xffffff00;
     msg.__addr_head = cpu_to_le32(0xfee);
     /* Keep this from original MSI address bits */
     msg.__not_used = irq->msi_addr_last_bits;
@@ -2275,11 +2275,7 @@ static MemTxResult vtd_mem_ir_write(void *opaque, hwaddr 
addr,
                 " for device sid 0x%04x",
                 to.address, to.data, sid);
 
-    if (dma_memory_write(&address_space_memory, to.address,
-                         &to.data, size)) {
-        VTD_DPRINTF(GENERAL, "error: fail to write 0x%"PRIx64
-                    " value 0x%"PRIx32, to.address, to.data);
-    }
+    apic_get_class()->send_msi(&to);
 
     return MEMTX_OK;
 }
-- 
2.10.0