[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 RFC] block/vxhs: Initial commit to add Verita
From: |
ashish mittal |
Subject: |
Re: [Qemu-devel] [PATCH v6 RFC] block/vxhs: Initial commit to add Veritas HyperScale VxHS block device support |
Date: |
Tue, 20 Sep 2016 23:45:37 -0700 |
On Tue, Sep 20, 2016 at 10:53 PM, Jeff Cody <address@hidden> wrote:
> On Tue, Sep 20, 2016 at 06:07:45PM -0700, Ashish Mittal wrote:
>> This patch adds support for a new block device type called "vxhs".
>> Source code for the library that this code loads can be downloaded from:
>> https://github.com/MittalAshish/libqnio.git
>>
>> Sample command line using JSON syntax:
>> ./qemu-system-x86_64 -name instance-00000008 -S -vnc 0.0.0.0:0 -k en-us -vga
>> cirrus -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x5 -msg
>> timestamp=on
>> 'json:{"driver":"vxhs","vdisk_id":"{c3e9095a-a5ee-4dce-afeb-2a59fb387410}","server":[{"host":"172.172.17.4","port":"9999"},{"host":"172.172.17.2","port":"9999"}]}'
>>
>> Sample command line using URI syntax:
>> qemu-img convert -f raw -O raw -n
>> /var/lib/nova/instances/_base/0c5eacd5ebea5ed914b6a3e7b18f1ce734c386ad
>> vxhs://192.168.0.1:9999/%7Bc6718f6b-0401-441d-a8c3-1f0064d75ee0%7D
>>
>
> I could not get the configure to work without massaging it a bit, nor could
> I get QEMU to compile with the (presumably) latest version of libqnio from
> github. I'm assuming there are some commits to libqnio that have not been
> pushed yet, between v5 and v6 of this RFC series? (It's an RFC series, so
> that is fine, I am just curious because I was able to compile v5).
>
That is correct. I will push the changes to libqnio tomorrow after
cleaning up the header files a bit. Will go over other comments also.
Thanks,
Ashish
>
>> Signed-off-by: Ashish Mittal <address@hidden>
>> ---
>> v6 changelog:
>> (1) Removed cJSON dependency out of the libqnioshim layer.
>> (2) Merged libqnioshim code into qemu vxhs driver proper.
>> Now qemu-vxhs code only links with libqnio.so.
>> (3) Replaced use of custom spinlocks with qemu_spin_lock.
>>
>> v5 changelog:
>> (1) Removed unused functions.
>> (2) Changed all qemu_ prefix for functions defined in libqnio and vxhs.c.
>> (3) Fixed memory leaks in vxhs_qemu_init() and on the close of vxhs device.
>> (4) Added upper bounds check on num_servers.
>> (5) Close channel fds whereever necessary.
>> (6) Changed vdisk_size to int64_t for 32-bit compilations.
>> (7) Added message to configure file to indicate if vxhs is enabled or not.
>>
>> v4 changelog:
>> (1) Reworked QAPI/JSON parsing.
>> (2) Reworked URI parsing as suggested by Kevin.
>> (3) Fixes per review comments from Stefan on v1.
>> (4) Fixes per review comments from Daniel on v3.
>>
>> v3 changelog:
>> (1) Implemented QAPI interface for passing VxHS block device parameters.
>>
>> v2 changelog:
>> (1) Removed code to dlopen library. We now check if libqnio is installed
>> during
>> configure, and directly link with it.
>> (2) Changed file headers to mention GPLv2-or-later license.
>> (3) Removed unnecessary type casts and inlines.
>> (4) Removed custom tokenize function and modified code to use g_strsplit.
>> (5) Replaced malloc/free with g_new/g_free and removed code that checks for
>> memory allocation failure conditions.
>> (6) Removed some block ops implementations that were place-holders only.
>> (7) Removed all custom debug messages. Added new messages in
>> block/trace-events
>> (8) Other miscellaneous corrections.
>>
>> v1 changelog:
>> (1) First patch submission for review comments.
>>
>> block/Makefile.objs | 2 +
>> block/trace-events | 47 ++
>> block/vxhs.c | 1602
>> +++++++++++++++++++++++++++++++++++++++++++++++++++
>> block/vxhs.h | 221 +++++++
>> configure | 41 ++
>> 5 files changed, 1913 insertions(+)
>> create mode 100644 block/vxhs.c
>> create mode 100644 block/vxhs.h
>>
>> diff --git a/block/Makefile.objs b/block/Makefile.objs
>> index 55da626..bafb7c9 100644
>> --- a/block/Makefile.objs
>> +++ b/block/Makefile.objs
>> @@ -18,6 +18,7 @@ block-obj-$(CONFIG_LIBNFS) += nfs.o
>> block-obj-$(CONFIG_CURL) += curl.o
>> block-obj-$(CONFIG_RBD) += rbd.o
>> block-obj-$(CONFIG_GLUSTERFS) += gluster.o
>> +block-obj-$(CONFIG_VXHS) += vxhs.o
>> block-obj-$(CONFIG_ARCHIPELAGO) += archipelago.o
>> block-obj-$(CONFIG_LIBSSH2) += ssh.o
>> block-obj-y += accounting.o dirty-bitmap.o
>> @@ -37,6 +38,7 @@ rbd.o-cflags := $(RBD_CFLAGS)
>> rbd.o-libs := $(RBD_LIBS)
>> gluster.o-cflags := $(GLUSTERFS_CFLAGS)
>> gluster.o-libs := $(GLUSTERFS_LIBS)
>> +vxhs.o-libs := $(VXHS_LIBS)
>> ssh.o-cflags := $(LIBSSH2_CFLAGS)
>> ssh.o-libs := $(LIBSSH2_LIBS)
>> archipelago.o-libs := $(ARCHIPELAGO_LIBS)
>> diff --git a/block/trace-events b/block/trace-events
>> index 05fa13c..b0098a7 100644
>> --- a/block/trace-events
>> +++ b/block/trace-events
>> @@ -114,3 +114,50 @@ qed_aio_write_data(void *s, void *acb, int ret,
>> uint64_t offset, size_t len) "s
>> qed_aio_write_prefill(void *s, void *acb, uint64_t start, size_t len,
>> uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
>> qed_aio_write_postfill(void *s, void *acb, uint64_t start, size_t len,
>> uint64_t offset) "s %p acb %p start %"PRIu64" len %zu offset %"PRIu64
>> qed_aio_write_main(void *s, void *acb, int ret, uint64_t offset, size_t
>> len) "s %p acb %p ret %d offset %"PRIu64" len %zu"
>> +
>> +# block/vxhs.c
>> +vxhs_bdrv_init(const char c) "Registering VxHS AIO driver%c"
>> +vxhs_iio_callback(int error, int reason) "ctx is NULL: error %d, reason %d"
>> +vxhs_setup_qnio(void *s) "Context to HyperScale IO manager = %p"
>> +vxhs_setup_qnio_nwerror(char c) "Could not initialize the network channel.
>> Bailing out%c"
>> +vxhs_iio_callback_iofail(int err, int reason, void *acb, int seg)
>> "Read/Write failed: error %d, reason %d, acb %p, segment %d"
>> +vxhs_iio_callback_retry(char *guid, void *acb) "vDisk %s, added acb %p to
>> retry queue (5)"
>> +vxhs_iio_callback_chnlfail(int error) "QNIO channel failed, no i/o (%d)"
>> +vxhs_iio_callback_fail(int r, void *acb, int seg, uint64_t size, int err) "
>> ALERT: reason = %d , acb = %p, acb->segments = %d, acb->size = %lu Error =
>> %d"
>> +vxhs_fail_aio(char * guid, void *acb) "vDisk %s, failing acb %p"
>> +vxhs_iio_callback_ready(char *vd, int err) "async vxhs_iio_callback:
>> IRP_VDISK_CHECK_IO_FAILOVER_READY completed for vdisk %s with error %d"
>> +vxhs_iio_callback_chnfail(int err, int error) "QNIO channel failed, no i/o
>> %d, %d"
>> +vxhs_iio_callback_unknwn(int opcode, int err) "unexpected opcode %d, errno
>> %d"
>> +vxhs_open_fail(int ret) "Could not open the device. Error = %d"
>> +vxhs_open_epipe(char c) "Could not create a pipe for device. Bailing out%c"
>> +vxhs_aio_rw(char *guid, int iodir, uint64_t size, uint64_t offset) "vDisk
>> %s, vDisk device is in failed state iodir = %d size = %lu offset = %lu"
>> +vxhs_aio_rw_retry(char *guid, void *acb, int queue) "vDisk %s, added acb %p
>> to retry queue(%d)"
>> +vxhs_aio_rw_invalid(int req) "Invalid I/O request iodir %d"
>> +vxhs_aio_rw_ioerr(char *guid, int iodir, uint64_t size, uint64_t off, void
>> *acb, int seg, int ret, int err) "IO ERROR (vDisk %s) FOR : Read/Write = %d
>> size = %lu offset = %lu ACB = %p Segments = %d. Error = %d, errno = %d"
>> +vxhs_co_flush(char *guid, int ret, int err) "vDisk (%s) Flush ioctl failed
>> ret = %d errno = %d"
>> +vxhs_get_vdisk_stat_err(char *guid, int ret, int err) "vDisk (%s) stat
>> ioctl failed, ret = %d, errno = %d"
>> +vxhs_get_vdisk_stat(char *vdisk_guid, uint64_t vdisk_size) "vDisk %s stat
>> ioctl returned size %lu"
>> +vxhs_switch_storage_agent(char *ip, char *guid) "Query host %s for vdisk %s"
>> +vxhs_switch_storage_agent_failed(char *ip, char *guid, int res, int err)
>> "Query to host %s for vdisk %s failed, res = %d, errno = %d"
>> +vxhs_check_failover_status(char *ip, char *guid) "Switched to storage
>> server host-IP %s for vdisk %s"
>> +vxhs_check_failover_status_retry(char *guid) "failover_ioctl_cb: keep
>> looking for io target for vdisk %s"
>> +vxhs_failover_io(char *vdisk) "I/O Failover starting for vDisk %s"
>> +vxhs_reopen_vdisk(char *ip) "Failed to connect to storage agent on host-ip
>> %s"
>> +vxhs_reopen_vdisk_openfail(char *fname) "Failed to open vdisk device: %s"
>> +vxhs_handle_queued_ios(void *acb, int res) "Restarted acb %p res %d"
>> +vxhs_restart_aio(int dir, int res, int err) "IO ERROR FOR: Read/Write = %d
>> Error = %d, errno = %d"
>> +vxhs_complete_aio(void *acb, uint64_t ret) "aio failed acb %p ret %ld"
>> +vxhs_aio_rw_iofail(char *guid) "vDisk %s, I/O operation failed."
>> +vxhs_aio_rw_devfail(char *guid, int dir, uint64_t size, uint64_t off)
>> "vDisk %s, vDisk device failed iodir = %d size = %lu offset = %lu"
>> +vxhs_parse_uri_filename(const char *filename) "URI passed via
>> bdrv_parse_filename %s"
>> +vxhs_qemu_init_vdisk(const char *vdisk_id) "vdisk_id from json %s"
>> +vxhs_qemu_init_numservers(int num_servers) "Number of servers passed = %d"
>> +vxhs_parse_uri_hostinfo(int num, char *host, int port) "Host %d: IP %s,
>> Port %d"
>> +vxhs_qemu_init(char *of_vsa_addr, int port) "Adding host %s:%d to
>> BDRVVXHSState"
>> +vxhs_qemu_init_filename(const char *filename) "Filename passed as %s"
>> +vxhs_close(char *vdisk_guid) "Closing vdisk %s"
>> +vxhs_convert_iovector_to_buffer(size_t len) "Could not allocate buffer for
>> size %zu bytes"
>> +vxhs_qnio_iio_writev(int res) "iio_writev returned %d"
>> +vxhs_qnio_iio_writev_err(int iter, uint64_t iov_len, int err) "Error for
>> iteration : %d, iov_len = %lu errno = %d"
>> +vxhs_qnio_iio_readv(void *ctx, int ret, int error) "Error while issuing
>> read to QNIO. ctx %p Error = %d, errno = %d"
>> +vxhs_qnio_iio_ioctl(uint32_t opcode) "Error while executing IOCTL. Opcode =
>> %u"
>> diff --git a/block/vxhs.c b/block/vxhs.c
>> new file mode 100644
>> index 0000000..888eca3
>> --- /dev/null
>> +++ b/block/vxhs.c
>> @@ -0,0 +1,1602 @@
>> +/*
>> + * QEMU Block driver for Veritas HyperScale (VxHS)
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#include "vxhs.h"
>> +#include <qnio/qnio_api.h>
>> +#include "qapi/qmp/qerror.h"
>> +#include "qapi/qmp/qdict.h"
>> +#include "qapi/qmp/qstring.h"
>> +#include "trace.h"
>> +
>> +#define VXHS_OPT_FILENAME "filename"
>> +#define VXHS_OPT_VDISK_ID "vdisk_id"
>> +#define VXHS_OPT_SERVER "server."
>> +#define VXHS_OPT_HOST "host"
>> +#define VXHS_OPT_PORT "port"
>> +
>> +/* qnio client ioapi_ctx */
>> +static void *global_qnio_ctx;
>> +
>> +/* vdisk prefix to pass to qnio */
>> +static const char vdisk_prefix[] = "/dev/of/vdisk";
>> +
>> +void vxhs_inc_acb_segment_count(void *ptr, int count)
>> +{
>> + VXHSAIOCB *acb = ptr;
>> + BDRVVXHSState *s = acb->common.bs->opaque;
>> +
>> + VXHS_SPIN_LOCK(s->vdisk_acb_lock);
>> + acb->segments += count;
>> + VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
>
> Just call qemu_spin_lock/unlock directly, rather than obscuring them in a
> macro.
>
>> +}
>> +
>> +void vxhs_dec_acb_segment_count(void *ptr, int count)
>> +{
>> + VXHSAIOCB *acb = ptr;
>> + BDRVVXHSState *s = acb->common.bs->opaque;
>> +
>> + VXHS_SPIN_LOCK(s->vdisk_acb_lock);
>> + acb->segments -= count;
>> + VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
>> +}
>> +
>> +void vxhs_set_acb_buffer(void *ptr, void *buffer)
>> +{
>> + VXHSAIOCB *acb = ptr;
>> +
>> + acb->buffer = buffer;
>> +}
>> +
>> +void vxhs_inc_vdisk_iocount(void *ptr, uint32_t count)
>> +{
>> + BDRVVXHSState *s = ptr;
>> +
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + s->vdisk_aio_count += count;
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> +}
>> +
>> +void vxhs_dec_vdisk_iocount(void *ptr, uint32_t count)
>> +{
>> + BDRVVXHSState *s = ptr;
>> +
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + s->vdisk_aio_count -= count;
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> +}
>> +
>> +void vxhs_iio_callback(int32_t rfd, uint32_t reason, void *ctx,
>> + uint32_t error, uint32_t opcode)
>> +{
>> + VXHSAIOCB *acb = NULL;
>> + BDRVVXHSState *s = NULL;
>> + int rv = 0;
>> + int segcount = 0;
>> +
>> + switch (opcode) {
>> + case IRP_READ_REQUEST:
>> + case IRP_WRITE_REQUEST:
>> +
>> + /*
>> + * ctx is VXHSAIOCB*
>> + * ctx is NULL if error is QNIOERROR_CHANNEL_HUP or reason is
>> IIO_REASON_HUP
>> + */
>> + if (ctx) {
>> + acb = ctx;
>> + s = acb->common.bs->opaque;
>> + } else {
>> + trace_vxhs_iio_callback(error, reason);
>> + goto out;
>> + }
>> +
>> + if (error) {
>> + trace_vxhs_iio_callback_iofail(error, reason, acb, acb->segments);
>> +
>> + if (reason == IIO_REASON_DONE || reason == IIO_REASON_EVENT) {
>> + /*
>> + * Storage agent failed while I/O was in progress
>> + * Fail over only if the qnio channel dropped, indicating
>> + * storage agent failure. Don't fail over in response to other
>> + * I/O errors such as disk failure.
>> + */
>> + if (error == QNIOERROR_RETRY_ON_SOURCE || error ==
>> QNIOERROR_HUP ||
>> + error == QNIOERROR_CHANNEL_HUP || error == -1) {
>> + /*
>> + * Start vDisk IO failover once callback is
>> + * called against all the pending IOs.
>> + * If vDisk has no redundancy enabled
>> + * then IO failover routine will mark
>> + * the vDisk failed and fail all the
>> + * AIOs without retry (stateless vDisk)
>> + */
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + if (!OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
>> + OF_VDISK_SET_IOFAILOVER_IN_PROGRESS(s);
>> + }
>> + /*
>> + * Check if this acb is already queued before.
>> + * It is possible in case if I/Os are submitted
>> + * in multiple segments (QNIO_MAX_IO_SIZE).
>> + */
>> + VXHS_SPIN_LOCK(s->vdisk_acb_lock);
>> + if (!OF_AIOCB_FLAGS_QUEUED(acb)) {
>> + QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq,
>> + acb, retry_entry);
>> + OF_AIOCB_FLAGS_SET_QUEUED(acb);
>> + s->vdisk_aio_retry_qd++;
>> + trace_vxhs_iio_callback_retry(s->vdisk_guid, acb);
>> + }
>> + segcount = --acb->segments;
>> + VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
>> + /*
>> + * Decrement AIO count only when callback is called
>> + * against all the segments of aiocb.
>> + */
>> + if (segcount == 0 && --s->vdisk_aio_count == 0) {
>> + /*
>> + * Start vDisk I/O failover
>> + */
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + /*
>> + * TODO:
>> + * Need to explore further if it is possible to optimize
>> + * the failover operation on Virtual-Machine (global)
>> + * specific rather vDisk specific.
>> + */
>> + vxhs_failover_io(s);
>> + goto out;
>> + }
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + goto out;
>> + }
>> + } else if (reason == IIO_REASON_HUP) {
>> + /*
>> + * Channel failed, spontaneous notification,
>> + * not in response to I/O
>> + */
>> + trace_vxhs_iio_callback_chnlfail(error);
>> + /*
>> + * TODO: Start channel failover when no I/O is outstanding
>> + */
>> + goto out;
>> + } else {
>> + trace_vxhs_iio_callback_fail(reason, acb, acb->segments,
>> + acb->size, error);
>> + }
>> + }
>> + /*
>> + * Set error into acb if not set. In case if acb is being
>> + * submitted in multiple segments then need to set the error
>> + * only once.
>> + *
>> + * Once acb done callback is called for the last segment
>> + * then acb->ret return status will be sent back to the
>> + * caller.
>> + */
>> + VXHS_SPIN_LOCK(s->vdisk_acb_lock);
>> + if (error && !acb->ret) {
>> + acb->ret = error;
>> + }
>> + --acb->segments;
>> + segcount = acb->segments;
>> + assert(segcount >= 0);
>> + VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
>> + /*
>> + * Check if all the outstanding I/Os are done against acb.
>> + * If yes then send signal for AIO completion.
>> + */
>> + if (segcount == 0) {
>> + rv = qemu_write_full(s->fds[VDISK_FD_WRITE], &acb, sizeof(acb));
>> + if (rv != sizeof(acb)) {
>> + error_report("VXHS AIO completion failed: %s", strerror(errno));
>> + abort();
>> + }
>> + }
>> + break;
>> +
>> + case IRP_VDISK_CHECK_IO_FAILOVER_READY:
>> + /* ctx is BDRVVXHSState* */
>> + assert(ctx);
>> + trace_vxhs_iio_callback_ready(((BDRVVXHSState *)ctx)->vdisk_guid,
>> + error);
>> + vxhs_check_failover_status(error, ctx);
>> + break;
>> +
>> + default:
>> + if (reason == IIO_REASON_HUP) {
>> + /*
>> + * Channel failed, spontaneous notification,
>> + * not in response to I/O
>> + */
>> + trace_vxhs_iio_callback_chnfail(error, errno);
>> + /*
>> + * TODO: Start channel failover when no I/O is outstanding
>> + */
>> + } else {
>> + trace_vxhs_iio_callback_unknwn(opcode, error);
>> + }
>> + break;
>> + }
>> +out:
>> + return;
>> +}
>> +
>> +void vxhs_complete_aio(VXHSAIOCB *acb, BDRVVXHSState *s)
>> +{
>> + BlockCompletionFunc *cb = acb->common.cb;
>> + void *opaque = acb->common.opaque;
>> + int ret = 0;
>> +
>> + if (acb->ret != 0) {
>> + trace_vxhs_complete_aio(acb, acb->ret);
>> + /*
>> + * We mask all the IO errors generically as EIO for upper layers
>> + * Right now our IO Manager uses non standard error codes. Instead
>> + * of confusing upper layers with incorrect interpretation we are
>> + * doing this workaround.
>> + */
>> + ret = (-EIO);
>> + }
>> + /*
>> + * Copy back contents from stablization buffer into original iovector
>> + * before returning the IO
>> + */
>> + if (acb->buffer != NULL) {
>> + qemu_iovec_from_buf(acb->qiov, 0, acb->buffer, acb->qiov->size);
>> + qemu_vfree(acb->buffer);
>> + acb->buffer = NULL;
>> + }
>> + vxhs_dec_vdisk_iocount(s, 1);
>> + acb->aio_done = VXHS_IO_COMPLETED;
>> + qemu_aio_unref(acb);
>> + cb(opaque, ret);
>> +}
>> +
>> +/*
>> + * This is the HyperScale event handler registered to QEMU.
>> + * It is invoked when any IO gets completed and written on pipe
>> + * by callback called from QNIO thread context. Then it marks
>> + * the AIO as completed, and releases HyperScale AIO callbacks.
>> + */
>> +void vxhs_aio_event_reader(void *opaque)
>> +{
>> + BDRVVXHSState *s = opaque;
>> + ssize_t ret;
>> +
>> + do {
>> + char *p = (char *)&s->qnio_event_acb;
>> +
>> + ret = read(s->fds[VDISK_FD_READ], p + s->event_reader_pos,
>> + sizeof(s->qnio_event_acb) - s->event_reader_pos);
>> + if (ret > 0) {
>> + s->event_reader_pos += ret;
>> + if (s->event_reader_pos == sizeof(s->qnio_event_acb)) {
>> + s->event_reader_pos = 0;
>> + vxhs_complete_aio(s->qnio_event_acb, s);
>> + }
>> + }
>> + } while (ret < 0 && errno == EINTR);
>> +}
>> +
>> +/*
>> + * Call QNIO operation to create channels to do IO on vDisk.
>> + */
>> +
>> +void *vxhs_setup_qnio(void)
>> +{
>> + void *qnio_ctx = NULL;
>> +
>> + qnio_ctx = iio_init(vxhs_iio_callback);
>> +
>> + if (qnio_ctx != NULL) {
>> + trace_vxhs_setup_qnio(qnio_ctx);
>> + } else {
>> + trace_vxhs_setup_qnio_nwerror('.');
>> + }
>> +
>> + return qnio_ctx;
>> +}
>> +
>> +size_t vxhs_calculate_iovec_size(struct iovec *iov, int niov)
>> +{
>> + int i;
>> + size_t size = 0;
>> +
>> + if (!iov || niov == 0) {
>> + return size;
>> + }
>> + for (i = 0; i < niov; i++) {
>> + size += iov[i].iov_len;
>> + }
>> + return size;
>> +}
>> +
>> +/*
>> + * This helper function converts an array of iovectors into a flat buffer.
>> + */
>> +void *vxhs_convert_iovector_to_buffer(struct iovec *iov, int niov,
>> + size_t sector)
>> +{
>> + void *buf = NULL;
>> + size_t size = 0;
>> +
>> + if (!iov || niov == 0) {
>> + return buf;
>> + }
>> +
>> + size = vxhs_calculate_iovec_size(iov, niov);
>> + buf = qemu_memalign(sector, size);
>> + if (!buf) {
>> + trace_vxhs_convert_iovector_to_buffer(size);
>> + errno = -ENOMEM;
>> + return NULL;
>> + }
>> + return buf;
>> +}
>> +
>> +/*
>> + * This helper function iterates over the iovector and checks
>> + * if the length of every element is an integral multiple
>> + * of the sector size.
>> + * Return Value:
>> + * On Success : return VXHS_VECTOR_ALIGNED
>> + * On Failure : return VXHS_VECTOR_NOT_ALIGNED.
>> + */
>> +int vxhs_is_iovector_read_aligned(struct iovec *iov, int niov, size_t
>> sector)
>> +{
>> + int i;
>> +
>> + if (!iov || niov == 0) {
>> + return VXHS_VECTOR_ALIGNED;
>> + }
>> + for (i = 0; i < niov; i++) {
>> + if (iov[i].iov_len % sector != 0) {
>> + return VXHS_VECTOR_NOT_ALIGNED;
>> + }
>> + }
>> + return VXHS_VECTOR_ALIGNED;
>> +}
>> +
>> +int32_t
>> +vxhs_qnio_iio_writev(void *qnio_ctx, uint32_t rfd, struct iovec *iov,
>> + int iovcnt, uint64_t offset, void *ctx, uint32_t flags)
>> +{
>> + struct iovec cur;
>> + uint64_t cur_offset = 0;
>> + uint64_t cur_write_len = 0;
>> + int segcount = 0;
>> + int ret = 0;
>> + int i, nsio = 0;
>> +
>> + errno = 0;
>> + cur.iov_base = 0;
>> + cur.iov_len = 0;
>> +
>> + ret = iio_writev(qnio_ctx, rfd, iov, iovcnt, offset, ctx, flags);
>> +
>> + if (ret == -1 && errno == EFBIG) {
>> + trace_vxhs_qnio_iio_writev(ret);
>> + /*
>> + * IO size is larger than IIO_IO_BUF_SIZE hence need to
>> + * split the I/O at IIO_IO_BUF_SIZE boundary
>> + * There are two cases here:
>> + * 1. iovcnt is 1 and IO size is greater than IIO_IO_BUF_SIZE
>> + * 2. iovcnt is greater than 1 and IO size is greater than
>> + * IIO_IO_BUF_SIZE.
>> + *
>> + * Need to adjust the segment count, for that we need to compute
>> + * the segment count and increase the segment count in one shot
>> + * instead of setting iteratively in for loop. It is required to
>> + * prevent any race between the splitted IO submission and IO
>> + * completion.
>> + */
>> + cur_offset = offset;
>> + for (i = 0; i < iovcnt; i++) {
>> + if (iov[i].iov_len <= IIO_IO_BUF_SIZE && iov[i].iov_len > 0) {
>> + cur_offset += iov[i].iov_len;
>> + nsio++;
>> + } else if (iov[i].iov_len > 0) {
>> + cur.iov_base = iov[i].iov_base;
>> + cur.iov_len = IIO_IO_BUF_SIZE;
>> + cur_write_len = 0;
>> + while (1) {
>> + nsio++;
>> + cur_write_len += cur.iov_len;
>> + if (cur_write_len == iov[i].iov_len) {
>> + break;
>> + }
>> + cur_offset += cur.iov_len;
>> + cur.iov_base += cur.iov_len;
>> + if ((iov[i].iov_len - cur_write_len) > IIO_IO_BUF_SIZE)
>> {
>> + cur.iov_len = IIO_IO_BUF_SIZE;
>> + } else {
>> + cur.iov_len = (iov[i].iov_len - cur_write_len);
>> + }
>> + }
>> + }
>> + }
>> +
>> + segcount = nsio - 1;
>> + vxhs_inc_acb_segment_count(ctx, segcount);
>> + /*
>> + * Split the IO and submit it to QNIO.
>> + * Reset the cur_offset before splitting the IO.
>> + */
>> + cur_offset = offset;
>> + nsio = 0;
>> + for (i = 0; i < iovcnt; i++) {
>> + if (iov[i].iov_len <= IIO_IO_BUF_SIZE && iov[i].iov_len > 0) {
>> + errno = 0;
>> + ret = iio_writev(qnio_ctx, rfd, &iov[i], 1, cur_offset, ctx,
>> + flags);
>> + if (ret == -1) {
>> + trace_vxhs_qnio_iio_writev_err(i, iov[i].iov_len,
>> errno);
>> + /*
>> + * Need to adjust the AIOCB segment count to prevent
>> + * blocking of AIOCB completion within QEMU block
>> driver.
>> + */
>> + if (segcount > 0 && (segcount - nsio) > 0) {
>> + vxhs_dec_acb_segment_count(ctx, segcount - nsio);
>> + }
>> + return ret;
>> + } else {
>> + cur_offset += iov[i].iov_len;
>> + }
>> + nsio++;
>> + } else if (iov[i].iov_len > 0) {
>> + /*
>> + * This case is where one element of the io vector is > 4MB.
>> + */
>> + cur.iov_base = iov[i].iov_base;
>> + cur.iov_len = IIO_IO_BUF_SIZE;
>> + cur_write_len = 0;
>> + while (1) {
>> + nsio++;
>> + errno = 0;
>> + ret = iio_writev(qnio_ctx, rfd, &cur, 1, cur_offset,
>> ctx,
>> + flags);
>> + if (ret == -1) {
>> + trace_vxhs_qnio_iio_writev_err(i, cur.iov_len,
>> errno);
>> + /*
>> + * Need to adjust the AIOCB segment count to prevent
>> + * blocking of AIOCB completion within the
>> + * QEMU block driver.
>> + */
>> + if (segcount > 0 && (segcount - nsio) > 0) {
>> + vxhs_dec_acb_segment_count(ctx, segcount -
>> nsio);
>> + }
>> + return ret;
>> + } else {
>> + cur_write_len += cur.iov_len;
>> + if (cur_write_len == iov[i].iov_len) {
>> + break;
>> + }
>> + cur_offset += cur.iov_len;
>> + cur.iov_base += cur.iov_len;
>> + if ((iov[i].iov_len - cur_write_len) >
>> + IIO_IO_BUF_SIZE) {
>> + cur.iov_len = IIO_IO_BUF_SIZE;
>> + } else {
>> + cur.iov_len = (iov[i].iov_len - cur_write_len);
>> + }
>> + }
>> + }
>> + }
>> + }
>> + }
>> + return ret;
>> +}
>> +
>> +/*
>> + * Iterate over the i/o vector and send read request
>> + * to QNIO one by one.
>> + */
>> +int32_t
>> +vxhs_qnio_iio_readv(void *qnio_ctx, uint32_t rfd, struct iovec *iov, int
>> iovcnt,
>> + uint64_t offset, void *ctx, uint32_t flags)
>> +{
>> + uint64_t read_offset = offset;
>> + void *buffer = NULL;
>> + size_t size;
>> + int aligned, segcount;
>> + int i, ret = 0;
>> +
>> + aligned = vxhs_is_iovector_read_aligned(iov, iovcnt, BDRV_SECTOR_SIZE);
>> + size = vxhs_calculate_iovec_size(iov, iovcnt);
>> +
>> + if (aligned == VXHS_VECTOR_NOT_ALIGNED) {
>> + buffer = vxhs_convert_iovector_to_buffer(iov, iovcnt,
>> BDRV_SECTOR_SIZE);
>> + if (buffer == NULL) {
>> + return -ENOMEM;
>> + }
>> +
>> + errno = 0;
>> + ret = iio_read(qnio_ctx, rfd, buffer, size, read_offset, ctx,
>> flags);
>> + if (ret != 0) {
>> + trace_vxhs_qnio_iio_readv(ctx, ret, errno);
>> + qemu_vfree(buffer);
>> + return ret;
>> + }
>> + vxhs_set_acb_buffer(ctx, buffer);
>> + return ret;
>> + }
>> +
>> + /*
>> + * Since read IO request is going to split based on
>> + * number of IOvectors hence increment the segment
>> + * count depending on the number of IOVectors before
>> + * submitting the read request to QNIO.
>> + * This is needed to protect the QEMU block driver
>> + * IO completion while read request for the same IO
>> + * is being submitted to QNIO.
>> + */
>> + segcount = iovcnt - 1;
>> + if (segcount > 0) {
>> + vxhs_inc_acb_segment_count(ctx, segcount);
>> + }
>> +
>> + for (i = 0; i < iovcnt; i++) {
>> + errno = 0;
>> + ret = iio_read(qnio_ctx, rfd, iov[i].iov_base, iov[i].iov_len,
>> + read_offset, ctx, flags);
>> + if (ret != 0) {
>> + trace_vxhs_qnio_iio_readv(ctx, ret, errno);
>> + /*
>> + * Need to adjust the AIOCB segment count to prevent
>> + * blocking of AIOCB completion within QEMU block driver.
>> + */
>> + if (segcount > 0 && (segcount - i) > 0) {
>> + vxhs_dec_acb_segment_count(ctx, segcount - i);
>> + }
>> + return ret;
>> + }
>> + read_offset += iov[i].iov_len;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +int32_t
>> +vxhs_qnio_iio_ioctl(void *apictx, uint32_t rfd, uint32_t opcode, int64_t
>> *in,
>> + void *ctx, uint32_t flags)
>> +{
>> + int ret = 0;
>> +
>> + switch (opcode) {
>> + case VDISK_STAT:
>> + ret = iio_ioctl(apictx, rfd, IOR_VDISK_STAT,
>> + in, ctx, flags);
>> + break;
>> +
>> + case VDISK_AIO_FLUSH:
>> + ret = iio_ioctl(apictx, rfd, IOR_VDISK_FLUSH,
>> + in, ctx, flags);
>> + break;
>> +
>> + case VDISK_CHECK_IO_FAILOVER_READY:
>> + ret = iio_ioctl(apictx, rfd, IOR_VDISK_CHECK_IO_FAILOVER_READY,
>> + in, ctx, flags);
>> + break;
>> +
>> + default:
>> + ret = -ENOTSUP;
>> + break;
>> + }
>> +
>> + if (ret) {
>> + *in = 0;
>> + trace_vxhs_qnio_iio_ioctl(opcode);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static QemuOptsList runtime_opts = {
>> + .name = "vxhs",
>> + .head = QTAILQ_HEAD_INITIALIZER(runtime_opts.head),
>> + .desc = {
>> + {
>> + .name = VXHS_OPT_FILENAME,
>> + .type = QEMU_OPT_STRING,
>> + .help = "URI to the Veritas HyperScale image",
>> + },
>> + {
>> + .name = VXHS_OPT_VDISK_ID,
>> + .type = QEMU_OPT_STRING,
>> + .help = "UUID of the VxHS vdisk",
>> + },
>> + { /* end of list */ }
>> + },
>> +};
>> +
>> +static QemuOptsList runtime_tcp_opts = {
>> + .name = "vxhs_tcp",
>> + .head = QTAILQ_HEAD_INITIALIZER(runtime_tcp_opts.head),
>> + .desc = {
>> + {
>> + .name = VXHS_OPT_HOST,
>> + .type = QEMU_OPT_STRING,
>> + .help = "host address (ipv4 addresses)",
>> + },
>> + {
>> + .name = VXHS_OPT_PORT,
>> + .type = QEMU_OPT_NUMBER,
>> + .help = "port number on which VxHSD is listening (default
>> 9999)",
>> + .def_value_str = "9999"
>> + },
>> + {
>> + .name = "to",
>> + .type = QEMU_OPT_NUMBER,
>> + .help = "max port number, not supported by VxHS",
>> + },
>> + {
>> + .name = "ipv4",
>> + .type = QEMU_OPT_BOOL,
>> + .help = "ipv4 bool value, not supported by VxHS",
>> + },
>> + {
>> + .name = "ipv6",
>> + .type = QEMU_OPT_BOOL,
>> + .help = "ipv6 bool value, not supported by VxHS",
>> + },
>> + { /* end of list */ }
>> + },
>> +};
>> +
>> +/*
>> + * Parse the incoming URI and populate *options with all the host(s)
>> + * information. Host at index 0 is local storage agent.
>> + * Remaining are the reflection target storage agents. The local storage
>> agent
>> + * ip is the efficient internal address in the uri, e.g. 192.168.0.2.
>> + * The local storage agent address is stored at index 0. The reflection
>> target
>> + * ips, are the E-W data network addresses of the reflection node agents,
>> also
>> + * extracted from the uri.
>> + */
>> +static int vxhs_parse_uri(const char *filename, QDict *options)
>> +{
>> + gchar **target_list;
>> + URI *uri = NULL;
>> + char *hoststr, *portstr;
>> + char *vdisk_id = NULL;
>> + char *port;
>> + int ret = 0;
>> + int i = 0;
>> +
>> + trace_vxhs_parse_uri_filename(filename);
>> + target_list = g_strsplit(filename, "%7D", 0);
>> + assert(target_list != NULL && target_list[0] != NULL);
>> +
>> + for (i = 0; target_list[i] != NULL && *target_list[i]; i++) {
>> + uri = uri_parse(target_list[i]);
>> + if (!uri || !uri->server) {
>> + uri_free(uri);
>> + ret = -EINVAL;
>> + break;
>> + }
>> +
>> + hoststr = g_strdup_printf(VXHS_OPT_SERVER"%d.host", i);
>> + qdict_put(options, hoststr, qstring_from_str(uri->server));
>> +
>> + portstr = g_strdup_printf(VXHS_OPT_SERVER"%d.port", i);
>> + if (uri->port) {
>> + port = g_strdup_printf("%d", uri->port);
>> + qdict_put(options, portstr, qstring_from_str(port));
>> + g_free(port);
>> + }
>> +
>> + if (i == 0 && (strstr(uri->path, "vxhs") == NULL)) {
>> + vdisk_id = g_strdup_printf("%s%c", uri->path, '}');
>> + qdict_put(options, "vdisk_id", qstring_from_str(vdisk_id));
>> + }
>> +
>> + trace_vxhs_parse_uri_hostinfo(i + 1, uri->server, uri->port);
>> + g_free(hoststr);
>> + g_free(portstr);
>> + g_free(vdisk_id);
>> + uri_free(uri);
>> + }
>> +
>> + g_strfreev(target_list);
>> + return ret;
>> +}
>> +
>> +static void vxhs_parse_filename(const char *filename, QDict *options,
>> + Error **errp)
>> +{
>> + if (qdict_haskey(options, "host")
>> + || qdict_haskey(options, "port")
>> + || qdict_haskey(options, "path"))
>> + {
>> + error_setg(errp, "host/port/path and a file name may not be
>> specified "
>> + "at the same time");
>> + return;
>> + }
>> +
>> + if (strstr(filename, "://")) {
>> + int ret = vxhs_parse_uri(filename, options);
>> + if (ret < 0) {
>> + error_setg(errp, "Invalid URI. URI should be of the form "
>> + " vxhs://<host_ip>:<port>/{<vdisk_id>}");
>> + }
>> + }
>> +}
>> +
>> +static int vxhs_qemu_init(QDict *options, BDRVVXHSState *s,
>> + int *cfd, int *rfd, Error **errp)
>> +{
>> + QDict *backing_options = NULL;
>> + QemuOpts *opts, *tcp_opts;
>> + const char *vxhs_filename;
>> + char *of_vsa_addr = NULL;
>> + Error *local_err = NULL;
>> + const char *vdisk_id_opt;
>> + char *file_name = NULL;
>> + size_t num_servers = 0;
>> + char *str = NULL;
>> + int ret = 0;
>> + int i;
>> +
>> + opts = qemu_opts_create(&runtime_opts, NULL, 0, &error_abort);
>> + qemu_opts_absorb_qdict(opts, options, &local_err);
>> + if (local_err) {
>> + ret = -EINVAL;
>
> Should do an error_setg() here as well.
>
>> + goto out;
>> + }
>> +
>> + vxhs_filename = qemu_opt_get(opts, VXHS_OPT_FILENAME);
>> + if (vxhs_filename) {
>> + trace_vxhs_qemu_init_filename(vxhs_filename);
>> + }
>> +
>> + vdisk_id_opt = qemu_opt_get(opts, VXHS_OPT_VDISK_ID);
>> + if (!vdisk_id_opt) {
>> + error_setg(&local_err, QERR_MISSING_PARAMETER, VXHS_OPT_VDISK_ID);
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> + s->vdisk_guid = g_strdup(vdisk_id_opt);
>> + trace_vxhs_qemu_init_vdisk(vdisk_id_opt);
>> +
>> + num_servers = qdict_array_entries(options, VXHS_OPT_SERVER);
>> + if (num_servers < 1) {
>> + error_setg(&local_err, QERR_MISSING_PARAMETER, "server");
>> + ret = -EINVAL;
>> + goto out;
>> + } else if (num_servers > 4) {
>
> Use the same macro that is used to define the array size itself,
> VXHS_MAX_HOSTS.
>
>> + error_setg(&local_err, QERR_INVALID_PARAMETER, "server");
>> + error_append_hint(errp, "Maximum 4 servers allowed.\n");
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> + trace_vxhs_qemu_init_numservers(num_servers);
>> +
>> + for (i = 0; i < num_servers; i++) {
>> + str = g_strdup_printf(VXHS_OPT_SERVER"%d.", i);
>> + qdict_extract_subqdict(options, &backing_options, str);
>> +
>> + /* Create opts info from runtime_tcp_opts list */
>> + tcp_opts = qemu_opts_create(&runtime_tcp_opts, NULL, 0,
>> &error_abort);
>> + qemu_opts_absorb_qdict(tcp_opts, backing_options, &local_err);
>> + if (local_err) {
>> + qdict_del(backing_options, str);
>> + qemu_opts_del(tcp_opts);
>> + g_free(str);
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> +
>> + s->vdisk_hostinfo[i].hostip = g_strdup(qemu_opt_get(tcp_opts,
>> + VXHS_OPT_HOST));
>> + s->vdisk_hostinfo[i].port = g_ascii_strtoll(qemu_opt_get(tcp_opts,
>> +
>> VXHS_OPT_PORT),
>> + NULL, 0);
>> +
>> + s->vdisk_hostinfo[i].qnio_cfd = -1;
>> + s->vdisk_hostinfo[i].vdisk_rfd = -1;
>> + trace_vxhs_qemu_init(s->vdisk_hostinfo[i].hostip,
>> + s->vdisk_hostinfo[i].port);
>> +
>> + qdict_del(backing_options, str);
>> + qemu_opts_del(tcp_opts);
>> + g_free(str);
>> + }
>> +
>> + s->vdisk_nhosts = i;
>> + s->vdisk_cur_host_idx = 0;
>> + file_name = g_strdup_printf("%s%s", vdisk_prefix, s->vdisk_guid);
>> + of_vsa_addr = g_strdup_printf("of://%s:%d",
>> +
>> s->vdisk_hostinfo[s->vdisk_cur_host_idx].hostip,
>> +
>> s->vdisk_hostinfo[s->vdisk_cur_host_idx].port);
>> +
>> + /*
>> + * .bdrv_open() and .bdrv_create() run under the QEMU global mutex.
>> + */
>> + if (global_qnio_ctx == NULL) {
>> + global_qnio_ctx = vxhs_setup_qnio();
>> + if (global_qnio_ctx == NULL) {
>> + error_setg(&local_err, "Failed vxhs_setup_qnio");
>> + ret = -EINVAL;
>> + goto out;
>> + }
>> + }
>
> I don't understand why a static global variable 'global_qnio_ctx' is being
> initialized here, and used below. I think this should be contained in the
> BDRVVXHSState struct, and initialized there.
>
> What is the difference between global_qnio_ctx, and s->qnio_ctx?
>
>> +
>> + *cfd = iio_open(global_qnio_ctx, of_vsa_addr, 0);
>> + if (*cfd < 0) {
>> + error_setg(&local_err, "Failed iio_open");
>> + ret = -EIO;
>> + goto out;
>> + }
>> + *rfd = iio_devopen(global_qnio_ctx, *cfd, file_name, 0);
>> + if (*rfd < 0) {
>> + iio_close(global_qnio_ctx, *cfd);
>> + *cfd = -1;
>> + error_setg(&local_err, "Failed iio_devopen");
>> + ret = -EIO;
>> + goto out;
>> + }
>> +
>> +out:
>> + g_free(file_name);
>> + g_free(of_vsa_addr);
>> + qemu_opts_del(opts);
>> +
>> + if (ret < 0) {
>> + for (i = 0; i < num_servers; i++) {
>> + g_free(s->vdisk_hostinfo[i].hostip);
>> + }
>> + g_free(s->vdisk_guid);
>> + s->vdisk_guid = NULL;
>> + errno = -ret;
>> + }
>> + error_propagate(errp, local_err);
>> + return ret;
>> +}
>> +
>> +int vxhs_open(BlockDriverState *bs, QDict *options,
>> + int bdrv_flags, Error **errp)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> + AioContext *aio_context;
>> + int qemu_qnio_cfd = -1;
>> + int device_opened = 0;
>> + int qemu_rfd = -1;
>> + int ret = 0;
>> + int i;
>> +
>> + ret = vxhs_qemu_init(options, s, &qemu_qnio_cfd, &qemu_rfd, errp);
>> + if (ret < 0) {
>> + trace_vxhs_open_fail(ret);
>> + return ret;
>> + } else {
>> + device_opened = 1;
>> + }
>
> device_opened is not needed, if we get to this point the vhxs_qemu_init()
> call was successful.
>
>> +
>> + s->qnio_ctx = global_qnio_ctx;
>
> Seems like global_qnio_ctx should be ditched, and s->qnio_ctx just
> initialized in vxhs_qemu_init(), right?
>
>> + s->vdisk_hostinfo[0].qnio_cfd = qemu_qnio_cfd;
>> + s->vdisk_hostinfo[0].vdisk_rfd = qemu_rfd;
>> + s->vdisk_size = 0;
>> + QSIMPLEQ_INIT(&s->vdisk_aio_retryq);
>> +
>> + /*
>> + * Create a pipe for communicating between two threads in different
>> + * context. Set handler for read event, which gets triggered when
>> + * IO completion is done by non-QEMU context.
>> + */
>> + ret = qemu_pipe(s->fds);
>> + if (ret < 0) {
>> + trace_vxhs_open_epipe('.');
>> + ret = -errno;
>> + goto errout;
>> + }
>> + fcntl(s->fds[VDISK_FD_READ], F_SETFL, O_NONBLOCK);
>> +
>> + aio_context = bdrv_get_aio_context(bs);
>> + aio_set_fd_handler(aio_context, s->fds[VDISK_FD_READ],
>> + false, vxhs_aio_event_reader, NULL, s);
>> +
>> + /*
>> + * Allocate/Initialize the spin-locks.
>> + *
>> + * NOTE:
>> + * Since spin lock is being allocated
>> + * dynamically hence moving acb struct
>> + * specific lock to BDRVVXHSState
>> + * struct. The reason being,
>> + * we don't want the overhead of spin
>> + * lock being dynamically allocated and
>> + * freed for every AIO.
>> + */
>> + s->vdisk_lock = VXHS_SPIN_LOCK_ALLOC;
>> + s->vdisk_acb_lock = VXHS_SPIN_LOCK_ALLOC;
>> +
>> + return 0;
>> +
>> +errout:
>> + /*
>> + * Close remote vDisk device if it was opened before
>> + */
>> + if (device_opened) {
>
> (as noted above, this is always '1' here)
>
>> + for (i = 0; i < s->vdisk_nhosts; i++) {
>> + if (s->vdisk_hostinfo[i].vdisk_rfd >= 0) {
>> + iio_devclose(s->qnio_ctx, 0,
>> + s->vdisk_hostinfo[i].vdisk_rfd);
>> + s->vdisk_hostinfo[i].vdisk_rfd = -1;
>> + }
>> + /*
>> + * close QNIO channel against cached channel open-fd
>> + */
>> + if (s->vdisk_hostinfo[i].qnio_cfd >= 0) {
>> + iio_close(s->qnio_ctx,
>> + s->vdisk_hostinfo[i].qnio_cfd);
>> + s->vdisk_hostinfo[i].qnio_cfd = -1;
>> + }
>> + }
>> + }
>> + trace_vxhs_open_fail(ret);
>> + return ret;
>> +}
>> +
>> +static const AIOCBInfo vxhs_aiocb_info = {
>> + .aiocb_size = sizeof(VXHSAIOCB)
>> +};
>> +
>> +/*
>> + * This allocates QEMU-VXHS callback for each IO
>> + * and is passed to QNIO. When QNIO completes the work,
>> + * it will be passed back through the callback.
>> + */
>> +BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs,
>> + int64_t sector_num, QEMUIOVector *qiov,
>> + int nb_sectors,
>> + BlockCompletionFunc *cb,
>> + void *opaque, int iodir)
>> +{
>> + VXHSAIOCB *acb = NULL;
>> + BDRVVXHSState *s = bs->opaque;
>> + size_t size;
>> + uint64_t offset;
>> + int iio_flags = 0;
>> + int ret = 0;
>> +
>> + offset = sector_num * BDRV_SECTOR_SIZE;
>> + size = nb_sectors * BDRV_SECTOR_SIZE;
>> +
>> + acb = qemu_aio_get(&vxhs_aiocb_info, bs, cb, opaque);
>> + /*
>> + * Setup or initialize VXHSAIOCB.
>> + * Every single field should be initialized since
>> + * acb will be picked up from the slab without
>> + * initializing with zero.
>> + */
>> + acb->io_offset = offset;
>> + acb->size = size;
>> + acb->ret = 0;
>> + acb->flags = 0;
>> + acb->aio_done = VXHS_IO_INPROGRESS;
>> + acb->segments = 0;
>> + acb->buffer = 0;
>> + acb->qiov = qiov;
>> + acb->direction = iodir;
>> +
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + if (OF_VDISK_FAILED(s)) {
>> + trace_vxhs_aio_rw(s->vdisk_guid, iodir, size, offset);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + goto errout;
>> + }
>> + if (OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
>> + QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq, acb, retry_entry);
>> + s->vdisk_aio_retry_qd++;
>> + OF_AIOCB_FLAGS_SET_QUEUED(acb);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + trace_vxhs_aio_rw_retry(s->vdisk_guid, acb, 1);
>> + goto out;
>> + }
>> + s->vdisk_aio_count++;
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> +
>> + iio_flags = (IIO_FLAG_DONE | IIO_FLAG_ASYNC);
>> +
>> + switch (iodir) {
>> + case VDISK_AIO_WRITE:
>> + vxhs_inc_acb_segment_count(acb, 1);
>> + ret = vxhs_qnio_iio_writev(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
>> + qiov->iov, qiov->niov, offset, (void *)acb, iio_flags);
>> + break;
>> + case VDISK_AIO_READ:
>> + vxhs_inc_acb_segment_count(acb, 1);
>> + ret = vxhs_qnio_iio_readv(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
>> + qiov->iov, qiov->niov, offset, (void *)acb, iio_flags);
>> + break;
>> + default:
>> + trace_vxhs_aio_rw_invalid(iodir);
>> + goto errout;
>> + }
>> +
>> + if (ret != 0) {
>> + trace_vxhs_aio_rw_ioerr(
>> + s->vdisk_guid, iodir, size, offset,
>> + acb, acb->segments, ret, errno);
>> + /*
>> + * Don't retry I/Os against vDisk having no
>> + * redundancy or stateful storage on compute
>> + *
>> + * TODO: Revisit this code path to see if any
>> + * particular error needs to be handled.
>> + * At this moment failing the I/O.
>> + */
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + if (s->vdisk_nhosts == 1) {
>> + trace_vxhs_aio_rw_iofail(s->vdisk_guid);
>> + s->vdisk_aio_count--;
>> + vxhs_dec_acb_segment_count(acb, 1);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + goto errout;
>> + }
>> + if (OF_VDISK_FAILED(s)) {
>
> If I am not mistaken, the image is never set as failed (via
> OF_VDISK_SET_FAILED). It just stays in the IOFAILOVER_IN_PROGRESS state
> until it works again. When would you expect to flag a failure?
>
>> + trace_vxhs_aio_rw_devfail(
>> + s->vdisk_guid, iodir, size, offset);
>> + s->vdisk_aio_count--;
>> + vxhs_dec_acb_segment_count(acb, 1);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + goto errout;
>> + }
>> + if (OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
>> + /*
>> + * Queue all incoming io requests after failover starts.
>> + * Number of requests that can arrive is limited by io queue
>> depth
>> + * so an app blasting independent ios will not exhaust memory.
>> + */
>> + QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq, acb, retry_entry);
>> + s->vdisk_aio_retry_qd++;
>> + OF_AIOCB_FLAGS_SET_QUEUED(acb);
>> + s->vdisk_aio_count--;
>> + vxhs_dec_acb_segment_count(acb, 1);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + trace_vxhs_aio_rw_retry(s->vdisk_guid, acb, 2);
>> + goto out;
>> + }
>> + OF_VDISK_SET_IOFAILOVER_IN_PROGRESS(s);
>> + QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq, acb, retry_entry);
>> + s->vdisk_aio_retry_qd++;
>> + OF_AIOCB_FLAGS_SET_QUEUED(acb);
>> + vxhs_dec_acb_segment_count(acb, 1);
>> + trace_vxhs_aio_rw_retry(s->vdisk_guid, acb, 3);
>> + /*
>> + * Start I/O failover if there is no active
>> + * AIO within vxhs block driver.
>> + */
>> + if (--s->vdisk_aio_count == 0) {
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + /*
>> + * Start IO failover
>> + */
>> + vxhs_failover_io(s);
>> + goto out;
>> + }
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + }
>> +
>> +out:
>> + return &acb->common;
>> +
>> +errout:
>> + qemu_aio_unref(acb);
>> + return NULL;
>> +}
>> +
>> +BlockAIOCB *vxhs_aio_readv(BlockDriverState *bs,
>> + int64_t sector_num, QEMUIOVector *qiov,
>> + int nb_sectors,
>> + BlockCompletionFunc *cb, void *opaque)
>> +{
>> + return vxhs_aio_rw(bs, sector_num, qiov, nb_sectors,
>> + cb, opaque, VDISK_AIO_READ);
>> +}
>> +
>> +BlockAIOCB *vxhs_aio_writev(BlockDriverState *bs,
>> + int64_t sector_num, QEMUIOVector *qiov,
>> + int nb_sectors,
>> + BlockCompletionFunc *cb, void *opaque)
>> +{
>> + return vxhs_aio_rw(bs, sector_num, qiov, nb_sectors,
>> + cb, opaque, VDISK_AIO_WRITE);
>> +}
>> +
>> +/*
>> + * This is called by QEMU when a flush gets triggered from within
>> + * a guest at the block layer, either for IDE or SCSI disks.
>> + */
>> +int vxhs_co_flush(BlockDriverState *bs)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> + int64_t size = 0;
>> + int ret = 0;
>> +
>> + /*
>> + * VDISK_AIO_FLUSH ioctl is a no-op at present and will
>> + * always return success. This could change in the future.
>> + */
>> + ret = vxhs_qnio_iio_ioctl(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
>> + VDISK_AIO_FLUSH, &size, NULL, IIO_FLAG_SYNC);
>
> I'm not sure if Kevin got an answer to his question on this before, so I'll
> ask it here just in case: does the QNIO server use O_SYNC or equivalent when
> writing data to its SSD cache?
>
> Speaking for myself, I am a little bit dubious of any claim that there are
> no 'flush' failure paths, even when using SSDs for reconstructable cacheing.
>
>
>> +
>> + if (ret < 0) {
>> + trace_vxhs_co_flush(s->vdisk_guid, ret, errno);
>> + vxhs_close(bs);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +unsigned long vxhs_get_vdisk_stat(BDRVVXHSState *s)
>> +{
>> + void *ctx = NULL;
>> + int flags = 0;
>> + int64_t vdisk_size = 0;
>> + int ret = 0;
>> +
>> + ret = vxhs_qnio_iio_ioctl(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
>> + VDISK_STAT, &vdisk_size, ctx, flags);
>> +
>> + if (ret < 0) {
>> + trace_vxhs_get_vdisk_stat_err(s->vdisk_guid, ret, errno);
>> + return 0;
>> + }
>> +
>> + trace_vxhs_get_vdisk_stat(s->vdisk_guid, vdisk_size);
>> + return vdisk_size;
>> +}
>> +
>> +/*
>> + * Returns the size of vDisk in bytes. This is required
>> + * by QEMU block upper block layer so that it is visible
>> + * to guest.
>> + */
>> +int64_t vxhs_getlength(BlockDriverState *bs)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> + int64_t vdisk_size = 0;
>> +
>> + if (s->vdisk_size > 0) {
>> + vdisk_size = s->vdisk_size;
>> + } else {
>> + /*
>> + * Fetch the vDisk size using stat ioctl
>> + */
>> + vdisk_size = vxhs_get_vdisk_stat(s);
>> + if (vdisk_size > 0) {
>> + s->vdisk_size = vdisk_size;
>> + }
>> + }
>> +
>> + if (vdisk_size > 0) {
>> + return vdisk_size; /* return size in bytes */
>> + } else {
>> + return -EIO;
>> + }
>> +}
>> +
>> +/*
>> + * Returns actual blocks allocated for the vDisk.
>> + * This is required by qemu-img utility.
>> + */
>> +int64_t vxhs_get_allocated_blocks(BlockDriverState *bs)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> + int64_t vdisk_size = 0;
>> +
>> + if (s->vdisk_size > 0) {
>> + vdisk_size = s->vdisk_size;
>> + } else {
>> + /*
>> + * TODO:
>> + * Once HyperScale storage-virtualizer provides
>> + * actual physical allocation of blocks then
>> + * fetch that information and return back to the
>> + * caller but for now just get the full size.
>> + */
>> + vdisk_size = vxhs_get_vdisk_stat(s);
>> + if (vdisk_size > 0) {
>> + s->vdisk_size = vdisk_size;
>> + }
>> + }
>> +
>> + if (vdisk_size > 0) {
>> + return vdisk_size; /* return size in bytes */
>> + } else {
>> + return -EIO;
>> + }
>> +}
>> +
>> +void vxhs_close(BlockDriverState *bs)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> + int i;
>> +
>> + trace_vxhs_close(s->vdisk_guid);
>> + close(s->fds[VDISK_FD_READ]);
>> + close(s->fds[VDISK_FD_WRITE]);
>> +
>> + /*
>> + * Clearing all the event handlers for oflame registered to QEMU
>> + */
>> + aio_set_fd_handler(bdrv_get_aio_context(bs), s->fds[VDISK_FD_READ],
>> + false, NULL, NULL, NULL);
>> +
>> + if (s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd >= 0) {
>> + iio_devclose(s->qnio_ctx, 0,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd);
>> + }
>> + if (s->vdisk_lock) {
>> + VXHS_SPIN_LOCK_DESTROY(s->vdisk_lock);
>> + s->vdisk_lock = NULL;
>> + }
>> + if (s->vdisk_acb_lock) {
>> + VXHS_SPIN_LOCK_DESTROY(s->vdisk_acb_lock);
>> + s->vdisk_acb_lock = NULL;
>> + }
>> +
>> + g_free(s->vdisk_guid);
>> + s->vdisk_guid = NULL;
>> +
>> + for (i = 0; i < VXHS_MAX_HOSTS; i++) {
>> + /*
>> + * Close vDisk device
>> + */
>> + if (s->vdisk_hostinfo[i].vdisk_rfd >= 0) {
>> + iio_devclose(s->qnio_ctx, 0,
>> + s->vdisk_hostinfo[i].vdisk_rfd);
>> + s->vdisk_hostinfo[i].vdisk_rfd = -1;
>> + }
>> +
>> + /*
>> + * Close Iridium channel against cached channel-fd
>> + */
>> + if (s->vdisk_hostinfo[i].qnio_cfd >= 0) {
>> + iio_close(s->qnio_ctx,
>> + s->vdisk_hostinfo[i].qnio_cfd);
>> + s->vdisk_hostinfo[i].qnio_cfd = -1;
>> + }
>> +
>> + /*
>> + * Free hostip string which is allocated dynamically
>> + */
>> + g_free(s->vdisk_hostinfo[i].hostip);
>> + s->vdisk_hostinfo[i].hostip = NULL;
>> + s->vdisk_hostinfo[i].port = 0;
>> + }
>> +}
>> +
>> +/*
>> + * If errors are consistent with storage agent failure:
>> + * - Try to reconnect in case error is transient or storage agent
>> restarted.
>> + * - Currently failover is being triggered on per vDisk basis. There is
>> + * a scope of further optimization where failover can be global (per VM).
>> + * - In case of network (storage agent) failure, for all the vDisks, having
>> + * no redundancy, I/Os will be failed without attempting for I/O failover
>> + * because of stateless nature of vDisk.
>> + * - If local or source storage agent is down then send an ioctl to remote
>> + * storage agent to check if remote storage agent in a state to accept
>> + * application I/Os.
>> + * - Once remote storage agent is ready to accept I/O, start I/O shipping.
>> + * - If I/Os cannot be serviced then vDisk will be marked failed so that
>> + * new incoming I/Os are returned with failure immediately.
>> + * - If vDisk I/O failover is in progress then all new/inflight I/Os will
>> + * queued and will be restarted or failed based on failover operation
>> + * is successful or not.
>> + * - I/O failover can be started either in I/O forward or I/O backward
>> + * path.
>> + * - I/O failover will be started as soon as all the pending acb(s)
>> + * are queued and there is no pending I/O count.
>> + * - If I/O failover couldn't be completed within QNIO_CONNECT_TIMOUT_SECS
>> + * then vDisk will be marked failed and all I/Os will be completed with
>> + * error.
>> + */
>> +
>> +int vxhs_switch_storage_agent(BDRVVXHSState *s)
>> +{
>> + int res = 0;
>> + int flags = (IIO_FLAG_ASYNC | IIO_FLAG_DONE);
>> +
>> + trace_vxhs_switch_storage_agent(
>> + s->vdisk_hostinfo[s->vdisk_ask_failover_idx].hostip,
>> + s->vdisk_guid);
>> +
>> + res = vxhs_reopen_vdisk(s, s->vdisk_ask_failover_idx);
>> + if (res == 0) {
>> + res = vxhs_qnio_iio_ioctl(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_ask_failover_idx].vdisk_rfd,
>> + VDISK_CHECK_IO_FAILOVER_READY, NULL, s, flags);
>> + } else {
>> + trace_vxhs_switch_storage_agent_failed(
>> + s->vdisk_hostinfo[s->vdisk_ask_failover_idx].hostip,
>> + s->vdisk_guid, res, errno);
>> + /*
>> + * Try the next host.
>> + * Calling vxhs_check_failover_status from here ties up the qnio
>> + * epoll loop if vxhs_qnio_iio_ioctl fails synchronously (-1)
>> + * for all the hosts in the IO target list.
>> + */
>> +
>> + vxhs_check_failover_status(res, s);
>> + }
>> + return res;
>> +}
>> +
>> +void vxhs_check_failover_status(int res, void *ctx)
>> +{
>> + BDRVVXHSState *s = ctx;
>> +
>> + if (res == 0) {
>> + /* found failover target */
>> + s->vdisk_cur_host_idx = s->vdisk_ask_failover_idx;
>> + s->vdisk_ask_failover_idx = 0;
>> + trace_vxhs_check_failover_status(
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].hostip,
>> + s->vdisk_guid);
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + OF_VDISK_RESET_IOFAILOVER_IN_PROGRESS(s);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + vxhs_handle_queued_ios(s);
>> + } else {
>> + /* keep looking */
>> + trace_vxhs_check_failover_status_retry(s->vdisk_guid);
>> + s->vdisk_ask_failover_idx++;
>> + if (s->vdisk_ask_failover_idx == s->vdisk_nhosts) {
>> + /* pause and cycle through list again */
>> + sleep(QNIO_CONNECT_RETRY_SECS);
>
> You can't sleep the QEMU thread like this. If this was always called from a
> coroutine (e.g., vxhs_aio_writev|readv), you could call co_aio_sleep_ns().
> But it is also called from your libqnio callback, so that can't be done. I
> think this is a design issue.
>
>
>> + s->vdisk_ask_failover_idx = 0;
>> + }
>> + res = vxhs_switch_storage_agent(s);
>> + }
>> +}
>
> If there is a network / server error, this failover logic keeps retrying
> forever. We should probably fail the drive at some point.
>
>> +
>> +int vxhs_failover_io(BDRVVXHSState *s)
>> +{
>> + int res = 0;
>> +
>> + trace_vxhs_failover_io(s->vdisk_guid);
>> +
>> + s->vdisk_ask_failover_idx = 0;
>> + res = vxhs_switch_storage_agent(s);
>> +
>> + return res;
>> +}
>> +
>> +/*
>> + * Try to reopen the vDisk on one of the available hosts
>> + * If vDisk reopen is successful on any of the host then
>> + * check if that node is ready to accept I/O.
>> + */
>> +int vxhs_reopen_vdisk(BDRVVXHSState *s, int index)
>> +{
>> + char *of_vsa_addr = NULL;
>> + char *file_name = NULL;
>> + int res = 0;
>> +
>> +
>> + /*
>> + * Close stale vdisk device remote fd since
>> + * it could be invalid fd after channel disconnect.
>> + * Reopen the vdisk to get the new fd.
>> + */
>> + if (s->vdisk_hostinfo[index].vdisk_rfd >= 0) {
>> + iio_devclose(s->qnio_ctx, 0,
>> + s->vdisk_hostinfo[index].vdisk_rfd);
>> + s->vdisk_hostinfo[index].vdisk_rfd = -1;
>> + }
>> +
>> + /*
>> + * As part of vDisk reopen, close the QNIO channel
>> + * against cached channel-fd (fd is being cached into
>> + * vDisk hostinfo).
>> + */
>> + if (s->vdisk_hostinfo[index].qnio_cfd >= 0) {
>> + iio_close(s->qnio_ctx,
>> + s->vdisk_hostinfo[index].qnio_cfd);
>> + s->vdisk_hostinfo[index].qnio_cfd = -1;
>> + }
>> +
>> + /*
>> + * Build storage agent address and vdisk device name strings
>> + */
>> + file_name = g_strdup_printf("%s%s", vdisk_prefix, s->vdisk_guid);
>> + of_vsa_addr = g_strdup_printf("of://%s:%d",
>> + s->vdisk_hostinfo[index].hostip,
>> s->vdisk_hostinfo[index].port);
>> + /*
>> + * Open qnio channel to storage agent if not opened before.
>> + */
>> + if (s->vdisk_hostinfo[index].qnio_cfd < 0) {
>> + s->vdisk_hostinfo[index].qnio_cfd =
>> + iio_open(global_qnio_ctx, of_vsa_addr, 0);
>> + if (s->vdisk_hostinfo[index].qnio_cfd < 0) {
>> + trace_vxhs_reopen_vdisk(s->vdisk_hostinfo[index].hostip);
>> + res = ENODEV;
>> + goto out;
>> + }
>> + }
>> +
>> + /*
>> + * Open vdisk device
>> + */
>> + s->vdisk_hostinfo[index].vdisk_rfd =
>> + iio_devopen(global_qnio_ctx,
>> + s->vdisk_hostinfo[index].qnio_cfd, file_name, 0);
>> +
>> + if (s->vdisk_hostinfo[index].vdisk_rfd < 0) {
>> + /*
>> + * Close QNIO channel against cached channel-fd
>> + */
>> + if (s->vdisk_hostinfo[index].qnio_cfd >= 0) {
>> + iio_close(s->qnio_ctx,
>> + s->vdisk_hostinfo[index].qnio_cfd);
>> + s->vdisk_hostinfo[index].qnio_cfd = -1;
>> + }
>> +
>> + trace_vxhs_reopen_vdisk_openfail(file_name);
>> + res = EIO;
>> + goto out;
>> + }
>> +
>> +out:
>> + g_free(of_vsa_addr);
>> + g_free(file_name);
>> + return res;
>> +}
>> +
>> +int vxhs_handle_queued_ios(BDRVVXHSState *s)
>> +{
>> + VXHSAIOCB *acb = NULL;
>> + int res = 0;
>> +
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + while ((acb = QSIMPLEQ_FIRST(&s->vdisk_aio_retryq)) != NULL) {
>> + /*
>> + * Before we process the acb, check whether I/O failover
>> + * started again due to failback or cascading failure.
>> + */
>> + if (OF_VDISK_IOFAILOVER_IN_PROGRESS(s)) {
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + goto out;
>> + }
>> + QSIMPLEQ_REMOVE_HEAD(&s->vdisk_aio_retryq, retry_entry);
>> + s->vdisk_aio_retry_qd--;
>> + OF_AIOCB_FLAGS_RESET_QUEUED(acb);
>> + if (OF_VDISK_FAILED(s)) {
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + vxhs_fail_aio(acb, EIO);
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + } else {
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + res = vxhs_restart_aio(acb);
>> + trace_vxhs_handle_queued_ios(acb, res);
>> + VXHS_SPIN_LOCK(s->vdisk_lock);
>> + if (res) {
>> + QSIMPLEQ_INSERT_TAIL(&s->vdisk_aio_retryq,
>> + acb, retry_entry);
>> + OF_AIOCB_FLAGS_SET_QUEUED(acb);
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> + goto out;
>> + }
>> + }
>> + }
>> + VXHS_SPIN_UNLOCK(s->vdisk_lock);
>> +out:
>> + return res;
>> +}
>> +
>> +int vxhs_restart_aio(VXHSAIOCB *acb)
>> +{
>> + BDRVVXHSState *s = NULL;
>> + int iio_flags = 0;
>> + int res = 0;
>> +
>> + s = acb->common.bs->opaque;
>> +
>> + if (acb->direction == VDISK_AIO_WRITE) {
>> + vxhs_inc_vdisk_iocount(s, 1);
>> + vxhs_inc_acb_segment_count(acb, 1);
>> + iio_flags = (IIO_FLAG_DONE | IIO_FLAG_ASYNC);
>> + res = vxhs_qnio_iio_writev(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
>> + acb->qiov->iov, acb->qiov->niov,
>> + acb->io_offset, (void *)acb, iio_flags);
>> + }
>> +
>> + if (acb->direction == VDISK_AIO_READ) {
>> + vxhs_inc_vdisk_iocount(s, 1);
>> + vxhs_inc_acb_segment_count(acb, 1);
>> + iio_flags = (IIO_FLAG_DONE | IIO_FLAG_ASYNC);
>> + res = vxhs_qnio_iio_readv(s->qnio_ctx,
>> + s->vdisk_hostinfo[s->vdisk_cur_host_idx].vdisk_rfd,
>> + acb->qiov->iov, acb->qiov->niov,
>> + acb->io_offset, (void *)acb, iio_flags);
>> + }
>> +
>> + if (res != 0) {
>> + vxhs_dec_vdisk_iocount(s, 1);
>> + vxhs_dec_acb_segment_count(acb, 1);
>> + trace_vxhs_restart_aio(acb->direction, res, errno);
>> + }
>> +
>> + return res;
>> +}
>> +
>> +void vxhs_fail_aio(VXHSAIOCB *acb, int err)
>> +{
>> + BDRVVXHSState *s = NULL;
>> + int segcount = 0;
>> + int rv = 0;
>> +
>> + s = acb->common.bs->opaque;
>> +
>> + trace_vxhs_fail_aio(s->vdisk_guid, acb);
>> + if (!acb->ret) {
>> + acb->ret = err;
>> + }
>> + VXHS_SPIN_LOCK(s->vdisk_acb_lock);
>> + segcount = acb->segments;
>> + VXHS_SPIN_UNLOCK(s->vdisk_acb_lock);
>> + if (segcount == 0) {
>> + /*
>> + * Complete the io request
>> + */
>> + rv = qemu_write_full(s->fds[VDISK_FD_WRITE], &acb, sizeof(acb));
>> + if (rv != sizeof(acb)) {
>> + error_report("VXHS AIO completion failed: %s",
>> + strerror(errno));
>> + abort();
>
> Don't abort all of QEMU on a disk error; rather, pass error up the stack.
>
>> + }
>> + }
>> +}
>> +
>> +static void vxhs_detach_aio_context(BlockDriverState *bs)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> +
>> + aio_set_fd_handler(bdrv_get_aio_context(bs), s->fds[VDISK_FD_READ],
>> + false, NULL, NULL, NULL);
>> +
>> +}
>> +
>> +static void vxhs_attach_aio_context(BlockDriverState *bs,
>> + AioContext *new_context)
>> +{
>> + BDRVVXHSState *s = bs->opaque;
>> +
>> + aio_set_fd_handler(new_context, s->fds[VDISK_FD_READ],
>> + false, vxhs_aio_event_reader, NULL, s);
>> +}
>> +
>> +static BlockDriver bdrv_vxhs = {
>> + .format_name = "vxhs",
>> + .protocol_name = "vxhs",
>> + .instance_size = sizeof(BDRVVXHSState),
>> + .bdrv_file_open = vxhs_open,
>> + .bdrv_parse_filename = vxhs_parse_filename,
>> + .bdrv_close = vxhs_close,
>> + .bdrv_getlength = vxhs_getlength,
>> + .bdrv_get_allocated_file_size = vxhs_get_allocated_blocks,
>> + .bdrv_aio_readv = vxhs_aio_readv,
>> + .bdrv_aio_writev = vxhs_aio_writev,
>> + .bdrv_co_flush_to_disk = vxhs_co_flush,
>> + .bdrv_detach_aio_context = vxhs_detach_aio_context,
>> + .bdrv_attach_aio_context = vxhs_attach_aio_context,
>> +};
>> +
>> +void bdrv_vxhs_init(void)
>> +{
>> + trace_vxhs_bdrv_init('.');
>> + bdrv_register(&bdrv_vxhs);
>> +}
>> +
>> +block_init(bdrv_vxhs_init);
>> diff --git a/block/vxhs.h b/block/vxhs.h
>> new file mode 100644
>> index 0000000..d3d94bf
>> --- /dev/null
>> +++ b/block/vxhs.h
>> @@ -0,0 +1,221 @@
>> +/*
>> + * QEMU Block driver for Veritas HyperScale (VxHS)
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2 or later.
>> + * See the COPYING file in the top-level directory.
>> + *
>> + */
>> +
>> +#ifndef VXHSD_H
>> +#define VXHSD_H
>> +
>> +#include "qemu/osdep.h"
>> +#include "qapi/error.h"
>> +#include "qemu/error-report.h"
>> +#include "block/block_int.h"
>> +#include "qemu/uri.h"
>> +#include "qemu/queue.h"
>> +
>> +#define QNIO_CONNECT_RETRY_SECS 5
>> +#define QNIO_CONNECT_TIMOUT_SECS 120
>> +
>> +/*
>> + * IO specific flags
>> + */
>> +#define IIO_FLAG_ASYNC 0x00000001
>> +#define IIO_FLAG_DONE 0x00000010
>> +#define IIO_FLAG_SYNC 0
>> +
>> +#define VDISK_FD_READ 0
>> +#define VDISK_FD_WRITE 1
>> +#define VXHS_MAX_HOSTS 4
>> +
>> +/* Lock specific macros */
>> +#define VXHS_SPIN_LOCK_ALLOC \
>> + (g_malloc(sizeof(QemuSpin)))
>> +#define VXHS_SPIN_LOCK(lock) \
>> + (qemu_spin_lock(lock))
>> +#define VXHS_SPIN_UNLOCK(lock) \
>> + (qemu_spin_unlock(lock))
>> +#define VXHS_SPIN_LOCK_DESTROY(lock) \
>> + (g_free(lock))
>> +
>> +typedef enum {
>> + VXHS_IO_INPROGRESS,
>> + VXHS_IO_COMPLETED,
>> + VXHS_IO_ERROR
>> +} VXHSIOState;
>> +
>> +typedef enum {
>> + VDISK_AIO_READ,
>> + VDISK_AIO_WRITE,
>> + VDISK_STAT,
>> + VDISK_TRUNC,
>> + VDISK_AIO_FLUSH,
>> + VDISK_AIO_RECLAIM,
>> + VDISK_GET_GEOMETRY,
>> + VDISK_CHECK_IO_FAILOVER_READY,
>> + VDISK_AIO_LAST_CMD
>> +} VDISKAIOCmd;
>> +
>> +typedef void (*qnio_callback_t)(ssize_t retval, void *arg);
>> +
>> +/*
>> + * BDRVVXHSState specific flags
>> + */
>> +#define OF_VDISK_FLAGS_STATE_ACTIVE 0x0000000000000001
>> +#define OF_VDISK_FLAGS_STATE_FAILED 0x0000000000000002
>> +#define OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS 0x0000000000000004
>> +
>> +#define OF_VDISK_ACTIVE(s) \
>> + ((s)->vdisk_flags & OF_VDISK_FLAGS_STATE_ACTIVE)
>> +#define OF_VDISK_SET_ACTIVE(s) \
>> + ((s)->vdisk_flags |= OF_VDISK_FLAGS_STATE_ACTIVE)
>> +#define OF_VDISK_RESET_ACTIVE(s) \
>> + ((s)->vdisk_flags &= ~OF_VDISK_FLAGS_STATE_ACTIVE)
>> +
>> +#define OF_VDISK_FAILED(s) \
>> + ((s)->vdisk_flags & OF_VDISK_FLAGS_STATE_FAILED)
>> +#define OF_VDISK_SET_FAILED(s) \
>> + ((s)->vdisk_flags |= OF_VDISK_FLAGS_STATE_FAILED)
>> +#define OF_VDISK_RESET_FAILED(s) \
>> + ((s)->vdisk_flags &= ~OF_VDISK_FLAGS_STATE_FAILED)
>> +
>> +#define OF_VDISK_IOFAILOVER_IN_PROGRESS(s) \
>> + ((s)->vdisk_flags & OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS)
>> +#define OF_VDISK_SET_IOFAILOVER_IN_PROGRESS(s) \
>> + ((s)->vdisk_flags |= OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS)
>> +#define OF_VDISK_RESET_IOFAILOVER_IN_PROGRESS(s) \
>> + ((s)->vdisk_flags &= ~OF_VDISK_FLAGS_IOFAILOVER_IN_PROGRESS)
>> +
>> +/*
>> + * VXHSAIOCB specific flags
>> + */
>> +#define OF_ACB_QUEUED 0x00000001
>> +
>> +#define OF_AIOCB_FLAGS_QUEUED(a) \
>> + ((a)->flags & OF_ACB_QUEUED)
>> +#define OF_AIOCB_FLAGS_SET_QUEUED(a) \
>> + ((a)->flags |= OF_ACB_QUEUED)
>> +#define OF_AIOCB_FLAGS_RESET_QUEUED(a) \
>> + ((a)->flags &= ~OF_ACB_QUEUED)
>> +
>> +typedef struct qemu2qnio_ctx {
>> + uint32_t qnio_flag;
>> + uint64_t qnio_size;
>> + char *qnio_channel;
>> + char *target;
>> + qnio_callback_t qnio_cb;
>> +} qemu2qnio_ctx_t;
>> +
>> +typedef qemu2qnio_ctx_t qnio2qemu_ctx_t;
>> +
>> +typedef struct LibQNIOSymbol {
>> + const char *name;
>> + gpointer *addr;
>> +} LibQNIOSymbol;
>> +
>> +/*
>> + * HyperScale AIO callbacks structure
>> + */
>> +typedef struct VXHSAIOCB {
>> + BlockAIOCB common;
>> + size_t ret;
>> + size_t size;
>> + QEMUBH *bh;
>> + int aio_done;
>> + int segments;
>> + int flags;
>> + size_t io_offset;
>> + QEMUIOVector *qiov;
>> + void *buffer;
>> + int direction; /* IO direction (r/w) */
>> + QSIMPLEQ_ENTRY(VXHSAIOCB) retry_entry;
>> +} VXHSAIOCB;
>> +
>> +typedef struct VXHSvDiskHostsInfo {
>> + int qnio_cfd; /* Channel FD */
>> + int vdisk_rfd; /* vDisk remote FD */
>> + char *hostip; /* Host's IP addresses */
>> + int port; /* Host's port number */
>> +} VXHSvDiskHostsInfo;
>> +
>> +/*
>> + * Structure per vDisk maintained for state
>> + */
>> +typedef struct BDRVVXHSState {
>> + int fds[2];
>> + int64_t vdisk_size;
>> + int64_t vdisk_blocks;
>> + int64_t vdisk_flags;
>> + int vdisk_aio_count;
>> + int event_reader_pos;
>> + VXHSAIOCB *qnio_event_acb;
>> + void *qnio_ctx;
>> + void *vdisk_lock; /* Lock to protect BDRVVXHSState */
>> + void *vdisk_acb_lock; /* Protects ACB */
>> + VXHSvDiskHostsInfo vdisk_hostinfo[VXHS_MAX_HOSTS]; /* Per host
>> info */
>> + int vdisk_nhosts; /* Total number of hosts */
>> + int vdisk_cur_host_idx; /* IOs are being shipped to
>> */
>> + int vdisk_ask_failover_idx; /*asking permsn to ship
>> io*/
>> + QSIMPLEQ_HEAD(aio_retryq, VXHSAIOCB) vdisk_aio_retryq;
>> + int vdisk_aio_retry_qd; /* Currently for debugging
>> */
>> + char *vdisk_guid;
>> +} BDRVVXHSState;
>> +
>> +void bdrv_vxhs_init(void);
>> +void *vxhs_setup_qnio(void);
>> +void vxhs_iio_callback(int32_t rfd, uint32_t reason, void *ctx,
>> + uint32_t error, uint32_t
>> opcode);
>> +void vxhs_aio_event_reader(void *opaque);
>> +void vxhs_complete_aio(VXHSAIOCB *acb, BDRVVXHSState *s);
>> +unsigned long vxhs_get_vdisk_stat(BDRVVXHSState *s);
>> +int vxhs_open(BlockDriverState *bs, QDict *options,
>> + int bdrv_flags, Error **errp);
>> +void vxhs_close(BlockDriverState *bs);
>> +BlockAIOCB *vxhs_aio_readv(BlockDriverState *bs, int64_t sector_num,
>> + QEMUIOVector *qiov, int
>> nb_sectors,
>> + BlockCompletionFunc *cb,
>> + void *opaque);
>> +BlockAIOCB *vxhs_aio_writev(BlockDriverState *bs, int64_t sector_num,
>> + QEMUIOVector *qiov, int
>> nb_sectors,
>> + BlockCompletionFunc *cb,
>> + void *opaque);
>> +int64_t vxhs_get_allocated_blocks(BlockDriverState *bs);
>> +BlockAIOCB *vxhs_aio_rw(BlockDriverState *bs, int64_t sector_num,
>> + QEMUIOVector *qiov, int
>> nb_sectors,
>> + BlockCompletionFunc *cb,
>> + void *opaque, int write);
>> +int32_t vxhs_qnio_iio_writev(void *qnio_ctx, uint32_t rfd, struct iovec
>> *iov,
>> + int iovcnt, uint64_t offset,
>> + void *ctx, uint32_t flags);
>> +int32_t vxhs_qnio_iio_readv(void *qnio_ctx, uint32_t rfd, struct iovec *iov,
>> + int iovcnt, uint64_t offset,
>> + void *ctx, uint32_t flags);
>> +int32_t vxhs_qnio_iio_ioctl(void *apictx, uint32_t rfd, uint32_t opcode,
>> + int64_t *in, void *ctx,
>> + uint32_t flags);
>> +size_t vxhs_calculate_iovec_size(struct iovec *iov, int niov);
>> +void vxhs_copy_iov_to_buffer(struct iovec *iov, int niov, void *buf);
>> +void *vxhs_convert_iovector_to_buffer(struct iovec *iov, int niov,
>> + size_t sector);
>> +int vxhs_is_iovector_read_aligned(struct iovec *iov, int niov, size_t
>> sector);
>> +
>> +int vxhs_aio_flush_cb(void *opaque);
>> +int vxhs_co_flush(BlockDriverState *bs);
>> +int64_t vxhs_getlength(BlockDriverState *bs);
>> +void vxhs_inc_vdisk_iocount(void *ptr, uint32_t delta);
>> +void vxhs_dec_vdisk_iocount(void *ptr, uint32_t delta);
>> +uint32_t vxhs_get_vdisk_iocount(void *ptr);
>> +void vxhs_inc_acb_segment_count(void *ptr, int count);
>> +void vxhs_dec_acb_segment_count(void *ptr, int count);
>> +void vxhs_set_acb_buffer(void *ptr, void *buffer);
>> +int vxhs_failover_io(BDRVVXHSState *s);
>> +int vxhs_reopen_vdisk(BDRVVXHSState *s, int hostinfo_index);
>> +int vxhs_switch_storage_agent(BDRVVXHSState *s);
>> +int vxhs_handle_queued_ios(BDRVVXHSState *s);
>> +int vxhs_restart_aio(VXHSAIOCB *acb);
>> +void vxhs_fail_aio(VXHSAIOCB *acb, int err);
>> +void vxhs_check_failover_status(int res, void *ctx);
>> +
>> +#endif
>> diff --git a/configure b/configure
>> index 7d083bd..11d1dec 100755
>> --- a/configure
>> +++ b/configure
>> @@ -322,6 +322,7 @@ numa=""
>> tcmalloc="no"
>> jemalloc="no"
>> replication="yes"
>> +vxhs=""
>>
>> # parse CC options first
>> for opt do
>> @@ -1163,6 +1164,11 @@ for opt do
>> ;;
>> --enable-replication) replication="yes"
>> ;;
>> + --disable-vxhs) vxhs="no"
>> + ;;
>> + --enable-vxhs) vxhs="yes"
>> + ;;
>> +
>> *)
>> echo "ERROR: unknown option $opt"
>> echo "Try '$0 --help' for more information"
>> @@ -1394,6 +1400,7 @@ disabled with --disable-FEATURE, default is enabled if
>> available:
>> tcmalloc tcmalloc support
>> jemalloc jemalloc support
>> replication replication support
>> + vxhs Veritas HyperScale vDisk backend support
>>
>> NOTE: The object files are built at the place where configure is launched
>> EOF
>> @@ -4560,6 +4567,33 @@ if do_cc -nostdlib -Wl,-r -Wl,--no-relax -o $TMPMO
>> $TMPO; then
>> fi
>>
>> ##########################################
>> +# Veritas HyperScale block driver VxHS
>> +# Check if libqnio is installed
>> +
>> +if test "$vxhs" != "no" ; then
>> + cat > $TMPC <<EOF
>> +#include <stdint.h>
>> +#include <qnio/qnio_api.h>
>> +
>> +void *vxhs_callback;
>> +
>> +int main(void) {
>> + iio_init(vxhs_callback);
>> + return 0;
>> +}
>> +EOF
>> + vxhs_libs="-lqnio"
>> + if compile_prog "" "$vxhs_libs" ; then
>> + vxhs=yes
>> + else
>> + if test "$vxhs" = "yes" ; then
>> + feature_not_found "vxhs block device" "Install libqnio. See github"
>> + fi
>> + vxhs=no
>> + fi
>> +fi
>> +
>> +##########################################
>> # End of CC checks
>> # After here, no more $cc or $ld runs
>>
>> @@ -4927,6 +4961,7 @@ echo "tcmalloc support $tcmalloc"
>> echo "jemalloc support $jemalloc"
>> echo "avx2 optimization $avx2_opt"
>> echo "replication support $replication"
>> +echo "VxHS block device $vxhs"
>>
>> if test "$sdl_too_old" = "yes"; then
>> echo "-> Your SDL version is too old - please upgrade to have SDL support"
>> @@ -5521,6 +5556,12 @@ if test "$pthread_setname_np" = "yes" ; then
>> echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak
>> fi
>>
>> +if test "$vxhs" = "yes" ; then
>> + echo "CONFIG_VXHS=y" >> $config_host_mak
>> + echo "VXHS_CFLAGS=$vxhs_cflags" >> $config_host_mak
>> + echo "VXHS_LIBS=$vxhs_libs" >> $config_host_mak
>> +fi
>> +
>> if test "$tcg_interpreter" = "yes"; then
>> QEMU_INCLUDES="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
>> elif test "$ARCH" = "sparc64" ; then
>> --
>> 2.5.5
>>
>>
>
> I haven't made it through everything yet, that was an initial pass.
>
> Jeff