qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v5 08/14] aspeed: add a ast2500 SoC and support to t


From: Cédric Le Goater
Subject: [Qemu-devel] [PATCH v5 08/14] aspeed: add a ast2500 SoC and support to the SCU and SDMC controllers
Date: Fri, 9 Sep 2016 18:22:51 +0200

Based on previous work done by Andrew Jeffery <address@hidden>.

Signed-off-by: Cédric Le Goater <address@hidden>
Reviewed-by: Andrew Jeffery <address@hidden>
Reviewed-by: Peter Maydell <address@hidden>
---

 Changes since v3:

 - added brackets around macro parameters
 - fixed trailing comma in enum

 Changes since v2:

 - more precise definitions of the hw-strap1 register

 hw/arm/aspeed_soc.c          |  2 ++
 hw/misc/aspeed_scu.c         | 45 +++++++++++++++++++++++++-
 hw/misc/aspeed_sdmc.c        |  1 +
 include/hw/misc/aspeed_scu.h | 75 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 122 insertions(+), 1 deletion(-)

diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index 07c9c90d7d3b..93bc7bb66e4b 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -38,10 +38,12 @@ static const int uart_irqs[] = { 9, 32, 33, 34, 10 };
 static const int timer_irqs[] = { 16, 17, 18, 35, 36, 37, 38, 39, };
 
 #define AST2400_SDRAM_BASE       0x40000000
+#define AST2500_SDRAM_BASE       0x80000000
 
 static const AspeedSoCInfo aspeed_socs[] = {
     { "ast2400-a0", "arm926", AST2400_A0_SILICON_REV, AST2400_SDRAM_BASE },
     { "ast2400",    "arm926", AST2400_A0_SILICON_REV, AST2400_SDRAM_BASE },
+    { "ast2500-a1", "arm1176", AST2500_A1_SILICON_REV, AST2500_SDRAM_BASE },
 };
 
 /*
diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
index c7e2c8263f55..b1f3e6f6b87a 100644
--- a/hw/misc/aspeed_scu.c
+++ b/hw/misc/aspeed_scu.c
@@ -120,6 +120,41 @@ static const uint32_t 
ast2400_a0_resets[ASPEED_SCU_NR_REGS] = {
      [BMC_DEV_ID]      = 0x00002402U
 };
 
+/* SCU70 bit 23: 0 24Mhz. bit 11:9: 0b001 AXI:ABH ratio 2:1 */
+/* AST2500 revision A1 */
+
+static const uint32_t ast2500_a1_resets[ASPEED_SCU_NR_REGS] = {
+     [SYS_RST_CTRL]    = 0xFFCFFEDCU,
+     [CLK_SEL]         = 0xF3F40000U,
+     [CLK_STOP_CTRL]   = 0x19FC3E8BU,
+     [D2PLL_PARAM]     = 0x00026108U,
+     [MPLL_PARAM]      = 0x00030291U,
+     [HPLL_PARAM]      = 0x93000400U,
+     [MISC_CTRL1]      = 0x00000010U,
+     [PCI_CTRL1]       = 0x20001A03U,
+     [PCI_CTRL2]       = 0x20001A03U,
+     [PCI_CTRL3]       = 0x04000030U,
+     [SYS_RST_STATUS]  = 0x00000001U,
+     [SOC_SCRATCH1]    = 0x000000C0U, /* SoC completed DRAM init */
+     [MISC_CTRL2]      = 0x00000023U,
+     [RNG_CTRL]        = 0x0000000EU,
+     [PINMUX_CTRL2]    = 0x0000F000U,
+     [PINMUX_CTRL3]    = 0x03000000U,
+     [PINMUX_CTRL4]    = 0x00000000U,
+     [PINMUX_CTRL5]    = 0x0000A000U,
+     [WDT_RST_CTRL]    = 0x023FFFF3U,
+     [PINMUX_CTRL8]    = 0xFFFF0000U,
+     [PINMUX_CTRL9]    = 0x000FFFFFU,
+     [FREE_CNTR4]      = 0x000000FFU,
+     [FREE_CNTR4_EXT]  = 0x000000FFU,
+     [CPU2_BASE_SEG1]  = 0x80000000U,
+     [CPU2_BASE_SEG4]  = 0x1E600000U,
+     [CPU2_BASE_SEG5]  = 0xC0000000U,
+     [UART_HPLL_CLK]   = 0x00001903U,
+     [PCIE_CTRL]       = 0x0000007BU,
+     [BMC_DEV_ID]      = 0x00002402U
+};
+
 static uint64_t aspeed_scu_read(void *opaque, hwaddr offset, unsigned size)
 {
     AspeedSCUState *s = ASPEED_SCU(opaque);
@@ -198,6 +233,10 @@ static void aspeed_scu_reset(DeviceState *dev)
     case AST2400_A0_SILICON_REV:
         reset = ast2400_a0_resets;
         break;
+    case AST2500_A0_SILICON_REV:
+    case AST2500_A1_SILICON_REV:
+        reset = ast2500_a1_resets;
+        break;
     default:
         g_assert_not_reached();
     }
@@ -208,7 +247,11 @@ static void aspeed_scu_reset(DeviceState *dev)
     s->regs[HW_STRAP2] = s->hw_strap2;
 }
 
-static uint32_t aspeed_silicon_revs[] = { AST2400_A0_SILICON_REV, };
+static uint32_t aspeed_silicon_revs[] = {
+    AST2400_A0_SILICON_REV,
+    AST2500_A0_SILICON_REV,
+    AST2500_A1_SILICON_REV,
+};
 
 bool is_supported_silicon_rev(uint32_t silicon_rev)
 {
diff --git a/hw/misc/aspeed_sdmc.c b/hw/misc/aspeed_sdmc.c
index fc4217b3ce64..244e5c0dc5ef 100644
--- a/hw/misc/aspeed_sdmc.c
+++ b/hw/misc/aspeed_sdmc.c
@@ -196,6 +196,7 @@ static void aspeed_sdmc_reset(DeviceState *dev)
         break;
 
     case AST2500_A0_SILICON_REV:
+    case AST2500_A1_SILICON_REV:
         s->regs[R_CONF] |=
             ASPEED_SDMC_HW_VERSION(1) |
             ASPEED_SDMC_VGA_APERTURE(ASPEED_SDMC_VGA_64MB) |
diff --git a/include/hw/misc/aspeed_scu.h b/include/hw/misc/aspeed_scu.h
index 4d3e770cec21..14ffc43de809 100644
--- a/include/hw/misc/aspeed_scu.h
+++ b/include/hw/misc/aspeed_scu.h
@@ -33,6 +33,7 @@ typedef struct AspeedSCUState {
 
 #define AST2400_A0_SILICON_REV   0x02000303U
 #define AST2500_A0_SILICON_REV   0x04000303U
+#define AST2500_A1_SILICON_REV   0x04010303U
 
 extern bool is_supported_silicon_rev(uint32_t silicon_rev);
 
@@ -154,4 +155,78 @@ extern bool is_supported_silicon_rev(uint32_t silicon_rev);
 #define     AST2400_SPI_BOOT                           2
 #define     AST2400_DIS_BOOT                           3
 
+/*
+ * Hardware strapping register definition (for Aspeed AST2500 SoC and
+ * higher)
+ *
+ * 31     Enable SPI Flash Strap Auto Fetch Mode
+ * 30     Enable GPIO Strap Mode
+ * 29     Select UART Debug Port
+ * 28     Reserved (1)
+ * 27     Enable fast reset mode for ARM ICE debugger
+ * 26     Enable eSPI flash mode
+ * 25     Enable eSPI mode
+ * 24     Select DDR4 SDRAM
+ * 23     Select 25 MHz reference clock input mode
+ * 22     Enable GPIOE pass-through mode
+ * 21     Enable GPIOD pass-through mode
+ * 20     Disable LPC to decode SuperIO 0x2E/0x4E address
+ * 19     Enable ACPI function
+ * 18     Select USBCKI input frequency
+ * 17     Enable BMC 2nd boot watchdog timer
+ * 16     SuperIO configuration address selection
+ * 15     VGA Class Code selection
+ * 14     Select dedicated LPC reset input
+ * 13:12  SPI mode selection
+ * 11:9   AXI/AHB clock frequency ratio selection
+ * 8      Reserved (0)
+ * 7      Define MAC#2 interface
+ * 6      Define MAC#1 interface
+ * 5      Enable dedicated VGA BIOS ROM
+ * 4      Reserved (0)
+ * 3:2    VGA memory size selection
+ * 1      Reserved (1)
+ * 0      Disable CPU boot
+ */
+#define SCU_AST2500_HW_STRAP_SPI_AUTOFETCH_ENABLE  (0x1 << 31)
+#define SCU_AST2500_HW_STRAP_GPIO_STRAP_ENABLE     (0x1 << 30)
+#define SCU_AST2500_HW_STRAP_UART_DEBUG            (0x1 << 29)
+#define     UART_DEBUG_UART1                           0
+#define     UART_DEBUG_UART5                           1
+#define SCU_AST2500_HW_STRAP_RESERVED28            (0x1 << 28)
+
+#define SCU_AST2500_HW_STRAP_FAST_RESET_DBG        (0x1 << 27)
+#define SCU_AST2500_HW_STRAP_ESPI_FLASH_ENABLE     (0x1 << 26)
+#define SCU_AST2500_HW_STRAP_ESPI_ENABLE           (0x1 << 25)
+#define SCU_AST2500_HW_STRAP_DDR4_ENABLE           (0x1 << 24)
+
+#define SCU_AST2500_HW_STRAP_ACPI_ENABLE           (0x1 << 19)
+#define SCU_AST2500_HW_STRAP_USBCKI_FREQ           (0x1 << 18)
+#define     USBCKI_FREQ_24MHZ                          0
+#define     USBCKI_FREQ_28MHZ                          1
+
+#define SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(x)  ((x) << 9)
+#define SCU_AST2500_HW_STRAP_GET_AXI_AHB_RATIO(x)  (((x) >> 9) & 7)
+#define SCU_AST2500_HW_STRAP_CPU_AXI_RATIO_MASK    (0x7 << 9)
+#define     AXI_AHB_RATIO_UNDEFINED                    0
+#define     AXI_AHB_RATIO_2_1                          1
+#define     AXI_AHB_RATIO_3_1                          2
+#define     AXI_AHB_RATIO_4_1                          3
+#define     AXI_AHB_RATIO_5_1                          4
+#define     AXI_AHB_RATIO_6_1                          5
+#define     AXI_AHB_RATIO_7_1                          6
+#define     AXI_AHB_RATIO_8_1                          7
+
+#define SCU_AST2500_HW_STRAP_RESERVED1             (0x1 << 1)
+#define SCU_AST2500_HW_STRAP_DIS_BOOT              (0x1 << 0)
+
+#define AST2500_HW_STRAP1_DEFAULTS (                                    \
+        SCU_AST2500_HW_STRAP_RESERVED28 |                               \
+        SCU_HW_STRAP_2ND_BOOT_WDT |                                     \
+        SCU_HW_STRAP_VGA_CLASS_CODE |                                   \
+        SCU_HW_STRAP_LPC_RESET_PIN |                                    \
+        SCU_AST2500_HW_STRAP_SET_AXI_AHB_RATIO(AXI_AHB_RATIO_2_1) |     \
+        SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
+        SCU_AST2500_HW_STRAP_RESERVED1)
+
 #endif /* ASPEED_SCU_H */
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]