[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 7/8] hw: xilinx-pcie: Add support for Xilinx AXI
From: |
Paul Burton |
Subject: |
[Qemu-devel] [PATCH v2 7/8] hw: xilinx-pcie: Add support for Xilinx AXI PCIe Controller |
Date: |
Thu, 8 Sep 2016 15:51:57 +0100 |
Add support for emulating the Xilinx AXI Root Port Bridge for PCI
Express as described by Xilinx' PG055 document. This is a PCIe
controller that can be used with certain series of Xilinx FPGAs, and is
used on the MIPS Boston board which will make use of this code.
Signed-off-by: Paul Burton <address@hidden>
---
hw/pci-host/Makefile.objs | 1 +
hw/pci-host/xilinx-pcie.c | 310 ++++++++++++++++++++++++++++++++++++++
include/hw/pci-host/xilinx-pcie.h | 102 +++++++++++++
3 files changed, 413 insertions(+)
create mode 100644 hw/pci-host/xilinx-pcie.c
create mode 100644 include/hw/pci-host/xilinx-pcie.h
diff --git a/hw/pci-host/Makefile.objs b/hw/pci-host/Makefile.objs
index 45f1f0e..9c7909c 100644
--- a/hw/pci-host/Makefile.objs
+++ b/hw/pci-host/Makefile.objs
@@ -16,3 +16,4 @@ common-obj-$(CONFIG_FULONG) += bonito.o
common-obj-$(CONFIG_PCI_PIIX) += piix.o
common-obj-$(CONFIG_PCI_Q35) += q35.o
common-obj-$(CONFIG_PCI_GENERIC) += gpex.o
+common-obj-$(CONFIG_PCI_XILINX) += xilinx-pcie.o
diff --git a/hw/pci-host/xilinx-pcie.c b/hw/pci-host/xilinx-pcie.c
new file mode 100644
index 0000000..2f3a712
--- /dev/null
+++ b/hw/pci-host/xilinx-pcie.c
@@ -0,0 +1,310 @@
+/*
+ * Xilinx PCIe host controller emulation.
+ *
+ * Copyright (c) 2016 Imagination Technologies
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/pci/pci_bridge.h"
+#include "hw/pci-host/xilinx-pcie.h"
+
+enum root_cfg_reg {
+ ROOTCFG_INTDEC = 0x138,
+
+ ROOTCFG_INTMASK = 0x13c,
+#define ROOTCFG_INTMASK_INTX (1 << 16)
+#define ROOTCFG_INTMASK_MSI (1 << 17)
+
+ ROOTCFG_PSCR = 0x144,
+#define ROOTCFG_PSCR_LINK (1 << 11)
+
+ ROOTCFG_RPSCR = 0x148,
+#define ROOTCFG_RPSCR_BRIDGEEN (1 << 0)
+#define ROOTCFG_RPSCR_INTNEMPTY (1 << 18)
+#define ROOTCFG_RPSCR_INTOVF (1 << 19)
+
+ ROOTCFG_RPIFR1 = 0x158,
+ ROOTCFG_RPIFR2 = 0x15c,
+};
+
+static void xilinx_pcie_update_intr(XilinxPCIEHost *s,
+ uint32_t set, uint32_t clear)
+{
+ int level;
+
+ s->intr |= set;
+ s->intr &= ~clear;
+
+ if (s->intr_fifo_r != s->intr_fifo_w) {
+ s->intr |= ROOTCFG_INTMASK_INTX;
+ }
+
+ level = !!(s->intr & s->intr_mask);
+ qemu_set_irq(s->irq, level);
+}
+
+static void xilinx_pcie_queue_intr(XilinxPCIEHost *s,
+ uint32_t fifo_reg1, uint32_t fifo_reg2)
+{
+ XilinxPCIEInt *intr;
+ unsigned int new_w;
+
+ new_w = (s->intr_fifo_w + 1) % ARRAY_SIZE(s->intr_fifo);
+ if (new_w == s->intr_fifo_r) {
+ s->rpscr |= ROOTCFG_RPSCR_INTOVF;
+ return;
+ }
+
+ intr = &s->intr_fifo[s->intr_fifo_w];
+ s->intr_fifo_w = new_w;
+
+ intr->fifo_reg1 = fifo_reg1;
+ intr->fifo_reg2 = fifo_reg2;
+
+ xilinx_pcie_update_intr(s, ROOTCFG_INTMASK_INTX, 0);
+}
+
+static void xilinx_pcie_set_irq(void *opaque, int irq_num, int level)
+{
+ XilinxPCIEHost *s = XILINX_PCIE_HOST(opaque);
+
+ if (!level) {
+ return;
+ }
+
+ xilinx_pcie_queue_intr(s, (irq_num << 27) | (level << 29) | (1 << 31), 0);
+}
+
+static void xilinx_pcie_host_realize(DeviceState *dev, Error **errp)
+{
+ PCIHostState *pci = PCI_HOST_BRIDGE(dev);
+ XilinxPCIEHost *s = XILINX_PCIE_HOST(dev);
+ SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
+ PCIExpressHost *pex = PCIE_HOST_BRIDGE(dev);
+
+ snprintf(s->name, sizeof(s->name), "pcie%u", s->bus_nr);
+
+ /* PCI configuration space */
+ pcie_host_mmcfg_init(pex, s->cfg_size);
+
+ /* MMIO region */
+ memory_region_init(&s->mmio, OBJECT(s), "mmio", UINT64_MAX);
+ memory_region_set_enabled(&s->mmio, false);
+
+ /* dummy I/O region */
+ memory_region_init_ram(&s->io, OBJECT(s), "io", 16, NULL);
+ memory_region_set_enabled(&s->io, false);
+
+ sysbus_init_mmio(sbd, &pex->mmio);
+ sysbus_init_mmio(sbd, &s->mmio);
+
+ pci->bus = pci_register_bus(dev, s->name, xilinx_pcie_set_irq,
+ pci_swizzle_map_irq_fn, s, &s->mmio,
+ &s->io, 0, 4, TYPE_PCIE_BUS);
+
+ qdev_set_parent_bus(DEVICE(&s->root), BUS(pci->bus));
+ qdev_init_nofail(DEVICE(&s->root));
+}
+
+static const char *xilinx_pcie_host_root_bus_path(PCIHostState *host_bridge,
+ PCIBus *rootbus)
+{
+ return "0000:00";
+}
+
+static void xilinx_pcie_host_init(Object *obj)
+{
+ XilinxPCIEHost *s = XILINX_PCIE_HOST(obj);
+ XilinxPCIERoot *root = &s->root;
+
+ object_initialize(root, sizeof(*root), TYPE_XILINX_PCIE_ROOT);
+ object_property_add_child(obj, "root", OBJECT(root), NULL);
+ qdev_prop_set_uint32(DEVICE(root), "addr", PCI_DEVFN(0, 0));
+ qdev_prop_set_bit(DEVICE(root), "multifunction", false);
+}
+
+static Property xilinx_pcie_host_props[] = {
+ DEFINE_PROP_UINT32("bus_nr", XilinxPCIEHost, bus_nr, 0),
+ DEFINE_PROP_SIZE("cfg_base", XilinxPCIEHost, cfg_base, 0),
+ DEFINE_PROP_SIZE("cfg_size", XilinxPCIEHost, cfg_size, 32 << 20),
+ DEFINE_PROP_SIZE("mmio_base", XilinxPCIEHost, mmio_base, 0),
+ DEFINE_PROP_SIZE("mmio_size", XilinxPCIEHost, mmio_size, 1 << 20),
+ DEFINE_PROP_PTR("irq", XilinxPCIEHost, irq_void),
+ DEFINE_PROP_BOOL("link_up", XilinxPCIEHost, link_up, true),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void xilinx_pcie_host_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ PCIHostBridgeClass *hc = PCI_HOST_BRIDGE_CLASS(klass);
+
+ hc->root_bus_path = xilinx_pcie_host_root_bus_path;
+ dc->realize = xilinx_pcie_host_realize;
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->fw_name = "pci";
+ dc->props = xilinx_pcie_host_props;
+}
+
+static const TypeInfo xilinx_pcie_host_info = {
+ .name = TYPE_XILINX_PCIE_HOST,
+ .parent = TYPE_PCIE_HOST_BRIDGE,
+ .instance_size = sizeof(XilinxPCIEHost),
+ .instance_init = xilinx_pcie_host_init,
+ .class_init = xilinx_pcie_host_class_init,
+};
+
+static uint32_t xilinx_pcie_root_config_read(PCIDevice *d,
+ uint32_t address, int len)
+{
+ XilinxPCIEHost *s = XILINX_PCIE_HOST(OBJECT(d)->parent);
+ uint32_t val;
+
+ switch (address) {
+ case ROOTCFG_INTDEC:
+ return s->intr;
+
+ case ROOTCFG_INTMASK:
+ return s->intr_mask;
+
+ case ROOTCFG_PSCR:
+ val = s->link_up ? ROOTCFG_PSCR_LINK : 0;
+ return val;
+
+ case ROOTCFG_RPSCR:
+ if (s->intr_fifo_r != s->intr_fifo_w) {
+ s->rpscr &= ~ROOTCFG_RPSCR_INTNEMPTY;
+ } else {
+ s->rpscr |= ROOTCFG_RPSCR_INTNEMPTY;
+ }
+ return s->rpscr;
+
+ case ROOTCFG_RPIFR1:
+ if (s->intr_fifo_w == s->intr_fifo_r) {
+ /* FIFO empty */
+ return 0;
+ }
+ return s->intr_fifo[s->intr_fifo_r].fifo_reg1;
+
+ case ROOTCFG_RPIFR2:
+ if (s->intr_fifo_w == s->intr_fifo_r) {
+ /* FIFO empty */
+ return 0;
+ }
+ return s->intr_fifo[s->intr_fifo_r].fifo_reg2;
+
+ default:
+ return pci_default_read_config(d, address, len);
+ }
+}
+
+static void xilinx_pcie_root_config_write(PCIDevice *d, uint32_t address,
+ uint32_t val, int len)
+{
+ XilinxPCIEHost *s = XILINX_PCIE_HOST(OBJECT(d)->parent);
+
+ switch (address) {
+ case ROOTCFG_INTDEC:
+ xilinx_pcie_update_intr(s, 0, val);
+ break;
+
+ case ROOTCFG_INTMASK:
+ s->intr_mask = val;
+ xilinx_pcie_update_intr(s, 0, 0);
+ break;
+
+ case ROOTCFG_RPSCR:
+ s->rpscr &= ~ROOTCFG_RPSCR_BRIDGEEN;
+ s->rpscr |= val & ROOTCFG_RPSCR_BRIDGEEN;
+ memory_region_set_enabled(&s->mmio, val & ROOTCFG_RPSCR_BRIDGEEN);
+
+ if (val & ROOTCFG_INTMASK_INTX) {
+ s->rpscr &= ~ROOTCFG_INTMASK_INTX;
+ }
+ break;
+
+ case ROOTCFG_RPIFR1:
+ case ROOTCFG_RPIFR2:
+ if (s->intr_fifo_w == s->intr_fifo_r) {
+ /* FIFO empty */
+ return;
+ }
+ s->intr_fifo_r = (s->intr_fifo_r + 1) % ARRAY_SIZE(s->intr_fifo);
+ break;
+
+ default:
+ pci_default_write_config(d, address, val, len);
+ break;
+ }
+}
+
+static int xilinx_pcie_root_init(PCIDevice *dev)
+{
+ BusState *bus = qdev_get_parent_bus(DEVICE(dev));
+ XilinxPCIEHost *s = XILINX_PCIE_HOST(bus->parent);
+
+ dev->config[PCI_COMMAND] = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
+ stw_le_p(&dev->config[PCI_MEMORY_BASE], s->mmio_base >> 16);
+ stw_le_p(&dev->config[PCI_MEMORY_LIMIT],
+ ((s->mmio_base + s->mmio_size - 1) >> 16) & 0xfff0);
+
+ pci_bridge_initfn(dev, TYPE_PCI_BUS);
+
+ if (pcie_endpoint_cap_v1_init(dev, 0x80) < 0) {
+ hw_error("Failed to initialize PCIe capability");
+ }
+
+ return 0;
+}
+
+static void xilinx_pcie_root_class_init(ObjectClass *klass, void *data)
+{
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories);
+ dc->desc = "Xilinx AXI-PCIe Host Bridge";
+ k->vendor_id = 0x10ee;
+ k->device_id = 0x7021;
+ k->revision = 0;
+ k->class_id = PCI_CLASS_BRIDGE_HOST;
+ k->is_express = true;
+ k->is_bridge = true;
+ k->init = xilinx_pcie_root_init;
+ k->exit = pci_bridge_exitfn;
+ dc->reset = pci_bridge_reset;
+ k->config_read = xilinx_pcie_root_config_read;
+ k->config_write = xilinx_pcie_root_config_write;
+ /*
+ * PCI-facing part of the host bridge, not usable without the
+ * host-facing part, which can't be device_add'ed, yet.
+ */
+ dc->cannot_instantiate_with_device_add_yet = true;
+}
+
+static const TypeInfo xilinx_pcie_root_info = {
+ .name = TYPE_XILINX_PCIE_ROOT,
+ .parent = TYPE_PCI_BRIDGE,
+ .instance_size = sizeof(XilinxPCIERoot),
+ .class_init = xilinx_pcie_root_class_init,
+};
+
+static void xilinx_pcie_register(void)
+{
+ type_register_static(&xilinx_pcie_root_info);
+ type_register_static(&xilinx_pcie_host_info);
+}
+type_init(xilinx_pcie_register)
diff --git a/include/hw/pci-host/xilinx-pcie.h
b/include/hw/pci-host/xilinx-pcie.h
new file mode 100644
index 0000000..443c1a6
--- /dev/null
+++ b/include/hw/pci-host/xilinx-pcie.h
@@ -0,0 +1,102 @@
+/*
+ * Xilinx PCIe host controller emulation.
+ *
+ * Copyright (c) 2016 Imagination Technologies
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef HW_XILINX_PCIE_H
+#define HW_XILINX_PCIE_H
+
+#include "hw/hw.h"
+#include "hw/sysbus.h"
+#include "hw/pci/pci.h"
+#include "hw/pci/pci_bus.h"
+#include "hw/pci/pcie_host.h"
+
+#define TYPE_XILINX_PCIE_HOST "xilinx-pcie-host"
+#define XILINX_PCIE_HOST(obj) \
+ OBJECT_CHECK(XilinxPCIEHost, (obj), TYPE_XILINX_PCIE_HOST)
+
+#define TYPE_XILINX_PCIE_ROOT "xilinx-pcie-root"
+#define XILINX_PCIE_ROOT(obj) \
+ OBJECT_CHECK(XilinxPCIERoot, (obj), TYPE_XILINX_PCIE_ROOT)
+
+typedef struct XilinxPCIERoot {
+ PCIBridge parent_obj;
+} XilinxPCIERoot;
+
+typedef struct XilinxPCIEInt {
+ uint32_t fifo_reg1;
+ uint32_t fifo_reg2;
+} XilinxPCIEInt;
+
+typedef struct XilinxPCIEHost {
+ PCIExpressHost parent_obj;
+
+ char name[16];
+
+ uint32_t bus_nr;
+ uint64_t cfg_base, cfg_size;
+ uint64_t mmio_base, mmio_size;
+ bool link_up;
+
+ union {
+ qemu_irq irq;
+ void *irq_void;
+ };
+
+ MemoryRegion mmio, io;
+
+ XilinxPCIERoot root;
+
+ uint32_t intr;
+ uint32_t intr_mask;
+ XilinxPCIEInt intr_fifo[16];
+ unsigned int intr_fifo_r, intr_fifo_w;
+ uint32_t rpscr;
+} XilinxPCIEHost;
+
+static inline XilinxPCIEHost *
+xilinx_pcie_init(MemoryRegion *sys_mem, uint32_t bus_nr,
+ hwaddr cfg_base, uint64_t cfg_size,
+ hwaddr mmio_base, uint64_t mmio_size,
+ qemu_irq irq, bool link_up)
+{
+ DeviceState *dev;
+ MemoryRegion *cfg, *mmio;
+
+ dev = qdev_create(NULL, TYPE_XILINX_PCIE_HOST);
+
+ qdev_prop_set_uint32(dev, "bus_nr", bus_nr);
+ qdev_prop_set_uint64(dev, "cfg_base", cfg_base);
+ qdev_prop_set_uint64(dev, "cfg_size", cfg_size);
+ qdev_prop_set_uint64(dev, "mmio_base", mmio_base);
+ qdev_prop_set_uint64(dev, "mmio_size", mmio_size);
+ qdev_prop_set_ptr(dev, "irq", irq);
+ qdev_prop_set_bit(dev, "link_up", link_up);
+
+ qdev_init_nofail(dev);
+
+ cfg = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 0);
+ memory_region_add_subregion_overlap(sys_mem, cfg_base, cfg, 0);
+
+ mmio = sysbus_mmio_get_region(SYS_BUS_DEVICE(dev), 1);
+ memory_region_add_subregion_overlap(sys_mem, 0, mmio, 0);
+
+ return XILINX_PCIE_HOST(dev);
+}
+
+#endif /* HW_XILINX_PCIE_H */
--
2.9.3
- [Qemu-devel] [PATCH v2 0/8] MIPS Boston board support, Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 1/8] hw/mips_cmgcr: allow GCR base to be moved, Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 2/8] hw/mips_gictimer: provide API for retrieving frequency, Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 3/8] hw/mips_gic: Update pin state on mask changes, Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 4/8] target-mips: Provide function to test if a CPU supports an ISA, Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 5/8] dtc: Update requirement to v1.4.2, Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 6/8] loader: Support Flattened Image Trees (FIT images), Paul Burton, 2016/09/08
- [Qemu-devel] [PATCH v2 7/8] hw: xilinx-pcie: Add support for Xilinx AXI PCIe Controller,
Paul Burton <=
- [Qemu-devel] [PATCH v2 8/8] hw/mips: MIPS Boston board support, Paul Burton, 2016/09/08
- Re: [Qemu-devel] [PATCH v2 0/8] MIPS Boston board support, no-reply, 2016/09/08