[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 04/22] target-arm: Provide hook to tell GICv3
From: |
Shannon Zhao |
Subject: |
Re: [Qemu-devel] [PATCH v2 04/22] target-arm: Provide hook to tell GICv3 about changes of security state |
Date: |
Tue, 14 Jun 2016 09:49:38 +0800 |
User-agent: |
Mozilla/5.0 (Windows NT 6.1; rv:24.0) Gecko/20100101 Thunderbird/24.4.0 |
On 2016/5/26 22:55, Peter Maydell wrote:
> The GICv3 CPU interface needs to know when the CPU it is attached
> to makes an exception level or mode transition that changes the
> security state, because whether it is asserting IRQ or FIQ can change
> depending on these things. Provide a mechanism for letting the GICv3
> device register a hook to be called on such changes.
>
> Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Shannon Zhao <address@hidden>
> ---
> target-arm/cpu.c | 9 +++++++++
> target-arm/cpu.h | 34 ++++++++++++++++++++++++++++++++++
> target-arm/helper.c | 2 ++
> target-arm/internals.h | 8 ++++++++
> target-arm/op_helper.c | 4 ++++
> 5 files changed, 57 insertions(+)
>
> diff --git a/target-arm/cpu.c b/target-arm/cpu.c
> index 3fd0743..0eaa907 100644
> --- a/target-arm/cpu.c
> +++ b/target-arm/cpu.c
> @@ -51,6 +51,15 @@ static bool arm_cpu_has_work(CPUState *cs)
> | CPU_INTERRUPT_EXITTB);
> }
>
> +void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHook *hook,
> + void *opaque)
> +{
> + /* We currently only support registering a single hook function */
> + assert(!cpu->el_change_hook);
> + cpu->el_change_hook = hook;
> + cpu->el_change_hook_opaque = opaque;
> +}
> +
> static void cp_reg_reset(gpointer key, gpointer value, gpointer opaque)
> {
> /* Reset a single ARMCPRegInfo register */
> diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> index 2fa1f41..9b045af 100644
> --- a/target-arm/cpu.h
> +++ b/target-arm/cpu.h
> @@ -504,6 +504,13 @@ typedef struct CPUARMState {
> } CPUARMState;
>
> /**
> + * ARMELChangeHook:
> + * type of a function which can be registered via
> arm_register_el_change_hook()
> + * to get callbacks when the CPU changes its exception level or mode.
> + */
> +typedef void ARMELChangeHook(ARMCPU *cpu, void *opaque);
> +
> +/**
> * ARMCPU:
> * @env: #CPUARMState
> *
> @@ -641,6 +648,9 @@ struct ARMCPU {
> /* DCZ blocksize, in log_2(words), ie low 4 bits of DCZID_EL0 */
> uint32_t dcz_blocksize;
> uint64_t rvbar;
> +
> + ARMELChangeHook *el_change_hook;
> + void *el_change_hook_opaque;
> };
>
> static inline ARMCPU *arm_env_get_cpu(CPUARMState *env)
> @@ -2373,4 +2383,28 @@ static inline AddressSpace *arm_addressspace(CPUState
> *cs, MemTxAttrs attrs)
> }
> #endif
>
> +/**
> + * arm_register_el_change_hook:
> + * Register a hook function which will be called back whenever this
> + * CPU changes exception level or mode. The hook function will be
> + * passed a pointer to the ARMCPU and the opaque data pointer passed
> + * to this function when the hook was registered.
> + *
> + * Note that we currently only support registering a single hook function,
> + * and will assert if this function is called twice.
> + * This facility is intended for the use of the GICv3 emulation.
> + */
> +void arm_register_el_change_hook(ARMCPU *cpu, ARMELChangeHook *hook,
> + void *opaque);
> +
> +/**
> + * arm_get_el_change_hook_opaque:
> + * Return the opaque data that will be used by the el_change_hook
> + * for this CPU.
> + */
> +static inline void *arm_get_el_change_hook_opaque(ARMCPU *cpu)
> +{
> + return cpu->el_change_hook_opaque;
> +}
> +
> #endif
> diff --git a/target-arm/helper.c b/target-arm/helper.c
> index e3ea26f..d907598 100644
> --- a/target-arm/helper.c
> +++ b/target-arm/helper.c
> @@ -6496,6 +6496,8 @@ void arm_cpu_do_interrupt(CPUState *cs)
> arm_cpu_do_interrupt_aarch32(cs);
> }
>
> + arm_call_el_change_hook(cpu);
> +
> if (!kvm_enabled()) {
> cs->interrupt_request |= CPU_INTERRUPT_EXITTB;
> }
> diff --git a/target-arm/internals.h b/target-arm/internals.h
> index a125873..5d8ec43 100644
> --- a/target-arm/internals.h
> +++ b/target-arm/internals.h
> @@ -479,4 +479,12 @@ bool arm_s1_regime_using_lpae_format(CPUARMState *env,
> ARMMMUIdx mmu_idx);
> void arm_cpu_do_unaligned_access(CPUState *cs, vaddr vaddr, int is_write,
> int is_user, uintptr_t retaddr);
>
> +/* Call the EL change hook if one has been registered */
> +static inline void arm_call_el_change_hook(ARMCPU *cpu)
> +{
> + if (cpu->el_change_hook) {
> + cpu->el_change_hook(cpu, cpu->el_change_hook_opaque);
> + }
> +}
> +
> #endif
> diff --git a/target-arm/op_helper.c b/target-arm/op_helper.c
> index 0b29b9d..8021738 100644
> --- a/target-arm/op_helper.c
> +++ b/target-arm/op_helper.c
> @@ -437,6 +437,8 @@ void HELPER(cpsr_write)(CPUARMState *env, uint32_t val,
> uint32_t mask)
> void HELPER(cpsr_write_eret)(CPUARMState *env, uint32_t val)
> {
> cpsr_write(env, val, CPSR_ERET_MASK, CPSRWriteExceptionReturn);
> +
> + arm_call_el_change_hook(arm_env_get_cpu(env));
> }
>
> /* Access to user mode registers from privileged modes. */
> @@ -932,6 +934,8 @@ void HELPER(exception_return)(CPUARMState *env)
> env->pc = env->elr_el[cur_el];
> }
>
> + arm_call_el_change_hook(arm_env_get_cpu(env));
> +
> return;
>
> illegal_return:
>
--
Shannon
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v2 04/22] target-arm: Provide hook to tell GICv3 about changes of security state,
Shannon Zhao <=