[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host pag
From: |
Andrew Jones |
Subject: |
Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes |
Date: |
Wed, 13 Apr 2016 14:37:14 +0200 |
User-agent: |
Mutt/1.5.23.1 (2014-03-12) |
On Wed, Apr 13, 2016 at 01:52:44PM +0200, Thomas Huth wrote:
> The balloon code currently calls madvise() with TARGET_PAGE_SIZE
> as length parameter, and an address which is directly based on
> the page address supplied by the guest. Since the virtio-balloon
> protocol is always based on 4k based addresses/sizes, no matter
> what the host and guest are using as page size, this has a couple
> of issues which could even lead to data loss in the worst case.
>
> TARGET_PAGE_SIZE might not be 4k, so it is wrong to use that
> value for the madvise() call. If TARGET_PAGE_SIZE is bigger than
> 4k, we also destroy the 4k areas after the current one - which
> might be wrong since the guest did not want free that area yet (in
> case the guest used as smaller MMU page size than the hard-coded
> TARGET_PAGE_SIZE). So to fix this issue, introduce a proper define
> called BALLOON_PAGE_SIZE (which is 4096) to use this as the size
> parameter for the madvise() call instead.
>
> Then, there's yet another problem: If the host page size is bigger
> than the 4k balloon page size, we can not simply call madvise() on
> each of the 4k balloon addresses that we get from the guest - since
> the madvise() always evicts the whole host page, not only a 4k area!
> So in this case, we've got to track the 4k fragments of a host page
> and only call madvise(DONTNEED) when all fragments have been collected.
> This of course only works fine if the guest sends consecutive 4k
> fragments - which is the case in the most important scenarios that
> I try to address here (like a ppc64 guest with 64k page size that
> is running on a ppc64 host with 64k page size). In case the guest
> uses a page size that is smaller than the host page size, we might
> need to add some more additional logic here later to increase the
> probability of being able to release memory, but at least the guest
> should now not crash anymore due to unintentionally evicted pages.
>
> Signed-off-by: Thomas Huth <address@hidden>
> ---
> I've tested this patch with both, a 4k page size ppc64 guest
> and a 64k page size ppc64 guest on a 64k page size ppc64 host.
> With this patch applied, I was not able to crash to crash the
> guests anymore (the 4k guest easily crashes without this patch).
> And looking at the output of the "free" command on the host,
> the ballooning also still works as expected.
>
> hw/virtio/virtio-balloon.c | 68
> ++++++++++++++++++++++++++++++++++----
> include/hw/virtio/virtio-balloon.h | 3 ++
> 2 files changed, 65 insertions(+), 6 deletions(-)
>
> diff --git a/hw/virtio/virtio-balloon.c b/hw/virtio/virtio-balloon.c
> index c74101e..886faa8 100644
> --- a/hw/virtio/virtio-balloon.c
> +++ b/hw/virtio/virtio-balloon.c
> @@ -35,13 +35,56 @@
> #include "hw/virtio/virtio-bus.h"
> #include "hw/virtio/virtio-access.h"
>
> -static void balloon_page(void *addr, int deflate)
> +#define BALLOON_PAGE_SIZE (1 << VIRTIO_BALLOON_PFN_SHIFT)
> +#define BALLOON_NO_CURRENT_PAGE ((void *)-1)
> +
> +static void balloon_page(VirtIOBalloon *s, void *addr, int deflate)
> {
> #if defined(__linux__)
> - if (!qemu_balloon_is_inhibited() && (!kvm_enabled() ||
> - kvm_has_sync_mmu())) {
> - qemu_madvise(addr, TARGET_PAGE_SIZE,
> - deflate ? QEMU_MADV_WILLNEED : QEMU_MADV_DONTNEED);
> + size_t host_page_size;
> + void *aligned_addr;
> +
> + if (qemu_balloon_is_inhibited() || (kvm_enabled() &&
> !kvm_has_sync_mmu())) {
> + return;
> + }
> +
> + host_page_size = getpagesize();
> + if (host_page_size <= BALLOON_PAGE_SIZE) {
> + qemu_madvise(addr, BALLOON_PAGE_SIZE,
> + deflate ? QEMU_MADV_WILLNEED : QEMU_MADV_DONTNEED);
> + return;
> + }
> +
> + /* Host page size > ballon page size ==> use aligned host address */
> + aligned_addr = (void *)((uintptr_t)addr & ~(host_page_size - 1));
> + if (deflate) {
> + /* MADV_WILLNEED is just a hint for the host kernel, the guest should
> + * also be able to use the memory again without this call, so let's
> + * only do it for the first, aligned fragment of a host page and
> + * ignore it for the others.
> + */
> + if (addr == aligned_addr) {
> + qemu_madvise(aligned_addr, host_page_size, QEMU_MADV_WILLNEED);
> + }
> + s->current_addr = BALLOON_NO_CURRENT_PAGE;
> + } else {
> + const int max_frags = host_page_size / BALLOON_PAGE_SIZE;
> + /* If we end up here, that means we want to evict balloon pages, but
> + * the host's page size is bigger than the 4k pages from the balloon.
> + * Since madvise() only works on the granularity of the host page
> size,
> + * we've got to collect all the 4k fragments from the guest first
> + * before we can issue the MADV_DONTNEED call.
> + */
> + if (aligned_addr != s->current_addr) {
> + memset(s->fragment_bits, 0, s->fragment_bits_size);
> + s->current_addr = aligned_addr;
So here's where we blow away a partial frag list when the guest advertises
pages in non-sequential order. Obviously not ideal, since in the worst-case
we'll never call madvise-dontneed. However, this patch fixes a problem, and
does likely work with normal guest behavior, so we're probably fine. It
might be nice to have some accounting to measure how often this happens
though.
> + }
> + set_bit((addr - aligned_addr) / BALLOON_PAGE_SIZE, s->fragment_bits);
> + if (find_first_zero_bit(s->fragment_bits, max_frags) == max_frags) {
> + qemu_madvise(aligned_addr, host_page_size, QEMU_MADV_DONTNEED);
> + memset(s->fragment_bits, 0, s->fragment_bits_size);
> + s->current_addr = BALLOON_NO_CURRENT_PAGE;
> + }
> }
> #endif
> }
> @@ -240,7 +283,7 @@ static void virtio_balloon_handle_output(VirtIODevice
> *vdev, VirtQueue *vq)
> /* Using memory_region_get_ram_ptr is bending the rules a bit,
> but
> should be OK because we only want a single page. */
> addr = section.offset_within_region;
> - balloon_page(memory_region_get_ram_ptr(section.mr) + addr,
> + balloon_page(s, memory_region_get_ram_ptr(section.mr) + addr,
> !!(vq == s->dvq));
> memory_region_unref(section.mr);
> }
> @@ -455,6 +498,13 @@ static void virtio_balloon_device_realize(DeviceState
> *dev, Error **errp)
> s->dvq = virtio_add_queue(vdev, 128, virtio_balloon_handle_output);
> s->svq = virtio_add_queue(vdev, 128, virtio_balloon_receive_stats);
>
> + if (getpagesize() > BALLOON_PAGE_SIZE) {
> + s->fragment_bits_size = (getpagesize() / BALLOON_PAGE_SIZE
> + + sizeof(long) * 8 - 1) / 8;
> + s->fragment_bits = g_malloc0(s->fragment_bits_size);
> + s->current_addr = BALLOON_NO_CURRENT_PAGE;
> + }
> +
> reset_stats(s);
>
> register_savevm(dev, "virtio-balloon", -1, 1,
> @@ -466,6 +516,7 @@ static void virtio_balloon_device_unrealize(DeviceState
> *dev, Error **errp)
> VirtIODevice *vdev = VIRTIO_DEVICE(dev);
> VirtIOBalloon *s = VIRTIO_BALLOON(dev);
>
> + g_free(s->fragment_bits);
> balloon_stats_destroy_timer(s);
> qemu_remove_balloon_handler(s);
> unregister_savevm(dev, "virtio-balloon", s);
> @@ -480,6 +531,11 @@ static void virtio_balloon_device_reset(VirtIODevice
> *vdev)
> g_free(s->stats_vq_elem);
> s->stats_vq_elem = NULL;
> }
> +
> + if (s->fragment_bits) {
> + memset(s->fragment_bits, 0, s->fragment_bits_size);
> + s->current_addr = BALLOON_NO_CURRENT_PAGE;
> + }
> }
>
> static void virtio_balloon_instance_init(Object *obj)
> diff --git a/include/hw/virtio/virtio-balloon.h
> b/include/hw/virtio/virtio-balloon.h
> index 35f62ac..04b7c0c 100644
> --- a/include/hw/virtio/virtio-balloon.h
> +++ b/include/hw/virtio/virtio-balloon.h
> @@ -43,6 +43,9 @@ typedef struct VirtIOBalloon {
> int64_t stats_last_update;
> int64_t stats_poll_interval;
> uint32_t host_features;
> + void *current_addr;
> + unsigned long *fragment_bits;
> + int fragment_bits_size;
> } VirtIOBalloon;
>
> #endif
> --
> 1.8.3.1
>
>
Other than the accounting suggestion which can be taken or left,
Reviewed-by: Andrew Jones <address@hidden>
drew
- [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Thomas Huth, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes,
Andrew Jones <=
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Michael S. Tsirkin, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Thomas Huth, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Michael S. Tsirkin, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Thomas Huth, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Michael S. Tsirkin, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Thomas Huth, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Michael S. Tsirkin, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, David Gibson, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Andrew Jones, 2016/04/13
- Re: [Qemu-devel] [PATCH] hw/virtio/balloon: Fixes for different host page sizes, Dr. David Alan Gilbert, 2016/04/14