Re: [Qemu-devel] [PATCH v3 10/10] ipmi: provide support for FRUs

[Michael S. Tsirkin]

On Tue, Mar 15, 2016 at 03:36:01PM +0100, Cédric Le Goater wrote:
> On 03/15/2016 03:30 PM, Michael S. Tsirkin wrote:
> > On Thu, Mar 10, 2016 at 03:04:03PM +0100, Cédric Le Goater wrote:
> >> This patch provides a simple FRU support for the BMC simulator. FRUs
> >> are loaded from a file which name is specified in the object
> >> properties, each entry having a fixed size, also specified in the
> >> properties. If the file is unknown or not accessible for some reason,
> >> a unique entry of 1024 bytes is created as a default. Just enough to
> >> start some simulation.
> >>
> >> These commands complies with the IPMI spec : "34. FRU Inventory Device
> >> Commands".
> >>
> >> Signed-off-by: Cédric Le Goater <address@hidden>
> >> Acked-by: Corey Minyard <address@hidden>
> > 
> > Since pull failed, I decided to hold this off until after release.
> > Loading new files needs some thought.
> 
> OK. See below for the build break.
> 
> >> ---
> >>
> >> Changes since v2:
> >>
> >>  - changed 'struct rsp_buffer' to 'RspBuffer'
> >>  
> >> Changes since v1:
> >>
> >>  - change property name to 'fruareasize' and 'frudatafile'
> >>  - add documentation of new properties
> >>  
> >>  hw/ipmi/ipmi_bmc_sim.c |  131 
> >> +++++++++++++++++++++++++++++++++++++++++++++++++
> >>  qemu-options.hx        |    8 ++
> >>  2 files changed, 137 insertions(+), 2 deletions(-)
> >>
> >> Index: qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c
> >> ===================================================================
> >> --- qemu-powernv.git.orig/hw/ipmi/ipmi_bmc_sim.c
> >> +++ qemu-powernv.git/hw/ipmi/ipmi_bmc_sim.c
> >> @@ -80,6 +80,9 @@
> >>  #define IPMI_CMD_ENTER_SDR_REP_UPD_MODE   0x2A
> >>  #define IPMI_CMD_EXIT_SDR_REP_UPD_MODE    0x2B
> >>  #define IPMI_CMD_RUN_INIT_AGENT           0x2C
> >> +#define IPMI_CMD_GET_FRU_AREA_INFO        0x10
> >> +#define IPMI_CMD_READ_FRU_DATA            0x11
> >> +#define IPMI_CMD_WRITE_FRU_DATA           0x12
> >>  #define IPMI_CMD_GET_SEL_INFO             0x40
> >>  #define IPMI_CMD_GET_SEL_ALLOC_INFO       0x41
> >>  #define IPMI_CMD_RESERVE_SEL              0x42
> >> @@ -122,6 +125,13 @@ typedef struct IPMISdr {
> >>      uint8_t overflow;
> >>  } IPMISdr;
> >>  
> >> +typedef struct IPMIFru {
> >> +    char *filename;
> >> +    unsigned int nentries;
> >> +    uint16_t areasize;
> >> +    uint8_t *data;
> >> +} IPMIFru;
> >> +
> >>  typedef struct IPMISensor {
> >>      uint8_t status;
> >>      uint8_t reading;
> >> @@ -213,6 +223,7 @@ struct IPMIBmcSim {
> >>  
> >>      IPMISel sel;
> >>      IPMISdr sdr;
> >> +    IPMIFru fru;
> >>      IPMISensor sensors[MAX_SENSORS];
> >>      char *sdr_filename;
> >>  
> >> @@ -1322,6 +1333,94 @@ static void get_sel_info(IPMIBmcSim *ibs
> >>      rsp_buffer_push(rsp, (ibs->sel.overflow << 7) | 0x02);
> >>  }
> >>  
> >> +static void get_fru_area_info(IPMIBmcSim *ibs,
> >> +                         uint8_t *cmd, unsigned int cmd_len,
> >> +                         RspBuffer *rsp)
> >> +{
> >> +    uint8_t fruid;
> >> +    uint16_t fru_entry_size;
> >> +
> >> +    fruid = cmd[2];
> >> +
> >> +    if (fruid >= ibs->fru.nentries) {
> >> +        rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD);
> >> +        return;
> >> +    }
> >> +
> >> +    fru_entry_size = ibs->fru.areasize;
> >> +
> >> +    rsp_buffer_push(rsp, fru_entry_size & 0xff);
> >> +    rsp_buffer_push(rsp, fru_entry_size >> 8 & 0xff);
> >> +    rsp_buffer_push(rsp, 0x0);
> >> +}
> >> +
> >> +#define min(x, y) ((x) < (y) ? (x) : (y))
> >> +#define max(x, y) ((x) > (y) ? (x) : (y))
> 
> 
> Do you want a resend to fix these ^ and use the MIN and MAX macros
> from osdep.h ?
> 
> C.

After the release pls.

> >> +static void read_fru_data(IPMIBmcSim *ibs,
> >> +                         uint8_t *cmd, unsigned int cmd_len,
> >> +                         RspBuffer *rsp)
> >> +{
> >> +    uint8_t fruid;
> >> +    uint16_t offset;
> >> +    int i;
> >> +    uint8_t *fru_entry;
> >> +    unsigned int count;
> >> +
> >> +    fruid = cmd[2];
> >> +    offset = (cmd[3] | cmd[4] << 8);
> >> +
> >> +    if (fruid >= ibs->fru.nentries) {
> >> +        rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD);
> >> +        return;
> >> +    }
> >> +
> >> +    if (offset >= ibs->fru.areasize - 1) {
> >> +        rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD);
> >> +        return;
> >> +    }
> >> +
> >> +    fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize];
> >> +
> >> +    count = min(cmd[5], ibs->fru.areasize - offset);
> >> +
> >> +    rsp_buffer_push(rsp, count & 0xff);
> >> +    for (i = 0; i < count; i++) {
> >> +        rsp_buffer_push(rsp, fru_entry[offset + i]);
> >> +    }
> >> +}
> >> +
> >> +static void write_fru_data(IPMIBmcSim *ibs,
> >> +                         uint8_t *cmd, unsigned int cmd_len,
> >> +                         RspBuffer *rsp)
> >> +{
> >> +    uint8_t fruid;
> >> +    uint16_t offset;
> >> +    uint8_t *fru_entry;
> >> +    unsigned int count;
> >> +
> >> +    fruid = cmd[2];
> >> +    offset = (cmd[3] | cmd[4] << 8);
> >> +
> >> +    if (fruid >= ibs->fru.nentries) {
> >> +        rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD);
> >> +        return;
> >> +    }
> >> +
> >> +    if (offset >= ibs->fru.areasize - 1) {
> >> +        rsp_buffer_set_error(rsp, IPMI_CC_INVALID_DATA_FIELD);
> >> +        return;
> >> +    }
> >> +
> >> +    fru_entry = &ibs->fru.data[fruid * ibs->fru.areasize];
> >> +
> >> +    count = min(cmd_len - 5, ibs->fru.areasize - offset);
> >> +
> >> +    memcpy(fru_entry + offset, cmd + 5, count);
> >> +
> >> +    rsp_buffer_push(rsp, count & 0xff);
> >> +}
> >> +
> >>  static void reserve_sel(IPMIBmcSim *ibs,
> >>                          uint8_t *cmd, unsigned int cmd_len,
> >>                          RspBuffer *rsp)
> >> @@ -1658,6 +1757,9 @@ static const IPMINetfn app_netfn = {
> >>  };
> >>  
> >>  static const IPMICmdHandler storage_cmds[] = {
> >> +    [IPMI_CMD_GET_FRU_AREA_INFO] = { get_fru_area_info, 3 },
> >> +    [IPMI_CMD_READ_FRU_DATA] = { read_fru_data, 5 },
> >> +    [IPMI_CMD_WRITE_FRU_DATA] = { write_fru_data, 5 },
> >>      [IPMI_CMD_GET_SDR_REP_INFO] = { get_sdr_rep_info },
> >>      [IPMI_CMD_RESERVE_SDR_REP] = { reserve_sdr_rep },
> >>      [IPMI_CMD_GET_SDR] = { get_sdr, 8 },
> >> @@ -1760,6 +1862,31 @@ static const VMStateDescription vmstate_
> >>      }
> >>  };
> >>  
> >> +static void ipmi_fru_init(IPMIFru *fru)
> >> +{
> >> +    int fsize;
> >> +    int size = 0;
> >> +
> >> +    fsize = get_image_size(fru->filename);
> >> +    if (fsize > 0) {
> >> +        size = QEMU_ALIGN_UP(fsize, fru->areasize);
> >> +        fru->data = g_malloc0(size);
> >> +        if (load_image_size(fru->filename, fru->data, fsize) != fsize) {
> >> +            error_report("Could not load file '%s'", fru->filename);
> >> +            g_free(fru->data);
> >> +            fru->data = NULL;
> >> +        }
> >> +    }
> >> +
> >> +    if (!fru->data) {
> >> +        /* give one default FRU */
> >> +        size = fru->areasize;
> >> +        fru->data = g_malloc0(size);
> >> +    }
> >> +
> >> +    fru->nentries = size / fru->areasize;
> >> +}
> >> +
> >>  static void ipmi_sim_realize(DeviceState *dev, Error **errp)
> >>  {
> >>      IPMIBmc *b = IPMI_BMC(dev);
> >> @@ -1782,6 +1909,8 @@ static void ipmi_sim_realize(DeviceState
> >>  
> >>      ipmi_sdr_init(ibs);
> >>  
> >> +    ipmi_fru_init(&ibs->fru);
> >> +
> >>      ibs->acpi_power_state[0] = 0;
> >>      ibs->acpi_power_state[1] = 0;
> >>  
> >> @@ -1800,6 +1929,8 @@ static void ipmi_sim_realize(DeviceState
> >>  }
> >>  
> >>  static Property ipmi_sim_properties[] = {
> >> +    DEFINE_PROP_UINT16("fruareasize", IPMIBmcSim, fru.areasize, 1024),
> >> +    DEFINE_PROP_STRING("frudatafile", IPMIBmcSim, fru.filename),
> >>      DEFINE_PROP_STRING("sdrfile", IPMIBmcSim, sdr_filename),
> >>      DEFINE_PROP_END_OF_LIST(),
> >>  };
> >> Index: qemu-powernv.git/qemu-options.hx
> >> ===================================================================
> >> --- qemu-powernv.git.orig/qemu-options.hx
> >> +++ qemu-powernv.git/qemu-options.hx
> >> @@ -387,7 +387,7 @@ possible drivers and properties, use @co
> >>  @code{-device @var{driver},help}.
> >>  
> >>  Some drivers are:
> >> address@hidden -device 
> >> ipmi-bmc-sim,address@hidden,address@hidden,address@hidden
> >> address@hidden -device 
> >> ipmi-bmc-sim,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
> >>  
> >>  Add an IPMI BMC.  This is a simulation of a hardware management
> >>  interface processor that normally sits on a system.  It provides
> >> @@ -405,7 +405,11 @@ The BMC to connect to, one of ipmi-bmc-s
> >>  @item address@hidden
> >>  Define slave address to use for the BMC.  The default is 0x20.
> >>  @item address@hidden
> >> -file containing raw Sensor Data Records (SDR) data.  The default is none.
> >> +file containing raw Sensor Data Records (SDR) data. The default is none.
> >> address@hidden address@hidden
> >> +size of a Field Replaceable Unit (FRU) area.  The default is 1024.
> >> address@hidden address@hidden
> >> +file containing raw Field Replaceable Unit (FRU) inventory data. The 
> >> default is none.
> >>  @end table
> >>  
> >>  @item -device ipmi-bmc-extern,address@hidden,address@hidden,address@hidden
> >