qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v2] block/gluster: add support for SEEK_DATA/SEE


From: Niels de Vos
Subject: Re: [Qemu-devel] [PATCH v2] block/gluster: add support for SEEK_DATA/SEEK_HOLE
Date: Wed, 9 Mar 2016 19:12:41 +0100
User-agent: Mutt/1.5.24 (2015-08-30)

On Wed, Mar 09, 2016 at 10:46:02AM -0500, Jeff Cody wrote:
> On Wed, Mar 09, 2016 at 01:30:14PM +0100, Niels de Vos wrote:
> > GlusterFS 3.8 contains support for SEEK_DATA and SEEK_HOLE. This makes
> > it possible to detect sparse areas in files.
> > 
> > Signed-off-by: Niels de Vos <address@hidden>
> > 
> > ---
> > Tested by compiling and running "qemu-img map gluster://..." with a
> > build of the current master branch of glusterfs. Using a Fedora cloud
> > image (in raw format) shows many SEEK procudure calls going back and
> > forth over the network. The output of "qemu map" matches the output when
> > run against the image on the local filesystem.
> > 
> > v2 based on feedback from Jeff Cody:
> > - Replace compile time detection by runtime detection
> > - Update return pointer (new argument) for .bdrv_co_get_block_status
> > ---
> >  block/gluster.c | 186 
> > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 186 insertions(+)
> > 
> > diff --git a/block/gluster.c b/block/gluster.c
> > index 65077a0..b01ab52 100644
> > --- a/block/gluster.c
> > +++ b/block/gluster.c
> > @@ -23,6 +23,7 @@ typedef struct GlusterAIOCB {
> >  typedef struct BDRVGlusterState {
> >      struct glfs *glfs;
> >      struct glfs_fd *fd;
> > +    bool supports_seek_data;
> >  } BDRVGlusterState;
> >  
> >  typedef struct GlusterConf {
> > @@ -286,6 +287,33 @@ static void qemu_gluster_parse_flags(int bdrv_flags, 
> > int *open_flags)
> >      }
> >  }
> >  
> > +/*
> > + * Do SEEK_DATA/HOLE to detect if it is functional. In order to be usable, 
> > it
> > + * should return different values for the start of data and the start of a
> > + * hole. There are three different cases to handle:
> > + *
> > + *  - the same position is returned for data/hole (indicates broken gfapi)
> > + *  - an error is returned:
> > + *     - ENXIO only gets returned if there is valid support on 
> > client+server
> > + *     - EINVAL is returned when gfapi or the server does not support it
> > + */
> > +static bool qemu_gluster_test_seek(struct glfs_fd *fd)
> > +{
> > +    off_t start_data, start_hole;
> > +    bool supports_seek_data = false;
> > +
> > +    start_data = glfs_lseek(fd, 0, SEEK_DATA);
> > +    if (start_data != -1) {
> 
> I recommend just checking if the returned value is >= 0.

Ok, I can change that.

> > +        start_hole = glfs_lseek(fd, 0, SEEK_HOLE);
> > +        if (start_hole != -1)
> 
> Minor formatting nit: per QEMU coding standard, all conditional
> statements require brackets.

Ah, sure, will do.

> > +            supports_seek_data = !(start_data == start_hole);
> > +    } else if (errno == ENXIO) {
> 
> This errno check for ENXIO won't catch the case if an ENXIO error
> occurs in the SEEK_HOLE call.

I'm not sure if I'm following. lseek(SEEK_DATA) returns -1 and sets
errno to ENXIO when the position in the filedescriptor is EOF. In this
test, we check from position=0, so when ENXIO is returned, we know the
file is empty and the return value+errno has gone through the whole
Gluster stack.

EINVAL would be an other error that is expected, in case either (a
current) gfapi or the server do not support SEEK_DATA.

I do not think there is a need to check for ENXIO on lseek(SEEK_HOLE).

Do you have a preference on how I should change it?

> > +        supports_seek_data = true;
> > +    }
> > +
> > +    return supports_seek_data;
> > +}
> > +
> >  static int qemu_gluster_open(BlockDriverState *bs,  QDict *options,
> >                               int bdrv_flags, Error **errp)
> >  {
> > @@ -320,6 +348,8 @@ static int qemu_gluster_open(BlockDriverState *bs,  
> > QDict *options,
> >          ret = -errno;
> >      }
> >  
> > +    s->supports_seek_data = qemu_gluster_test_seek(s->fd);
> > +
> >  out:
> >      qemu_opts_del(opts);
> >      qemu_gluster_gconf_free(gconf);
> > @@ -677,6 +707,158 @@ static int 
> > qemu_gluster_has_zero_init(BlockDriverState *bs)
> >      return 0;
> >  }
> >  
> > +/*
> > + * Find allocation range in @bs around offset @start.
> > + * May change underlying file descriptor's file offset.
> > + * If @start is not in a hole, store @start in @data, and the
> > + * beginning of the next hole in @hole, and return 0.
> > + * If @start is in a non-trailing hole, store @start in @hole and the
> > + * beginning of the next non-hole in @data, and return 0.
> > + * If @start is in a trailing hole or beyond EOF, return -ENXIO.
> > + * If we can't find out, return a negative errno other than -ENXIO.
> > + *
> > + * (Shamefully copied from raw-posix.c, only miniscule adaptions.)
> > + */
> > +static int find_allocation(BlockDriverState *bs, off_t start,
> > +                           off_t *data, off_t *hole)
> > +{
> > +    BDRVGlusterState *s = bs->opaque;
> > +    off_t offs;
> > +
> > +    if (!s->supports_seek_data)
> 
> Another formatting nit: brackets needed here as well.

Ok!

> > +        return -EINVAL;
> 
> -ENOTSUP would probably be a better fit here, but I don't care too
> much, since the error code isn't passed along outside the gluster
> driver.

Yes, I agree that -ENOTSUP is nicer, will change that too.

> > +
> > +    /*
> > +     * SEEK_DATA cases:
> > +     * D1. offs == start: start is in data
> > +     * D2. offs > start: start is in a hole, next data at offs
> > +     * D3. offs < 0, errno = ENXIO: either start is in a trailing hole
> > +     *                              or start is beyond EOF
> > +     *     If the latter happens, the file has been truncated behind
> > +     *     our back since we opened it.  All bets are off then.
> > +     *     Treating like a trailing hole is simplest.
> > +     * D4. offs < 0, errno != ENXIO: we learned nothing
> > +     */
> > +    offs = glfs_lseek(s->fd, start, SEEK_DATA);
> > +    if (offs < 0) {
> > +        return -errno;          /* D3 or D4 */
> > +    }
> > +    assert(offs >= start);
> > +
> > +    if (offs > start) {
> > +        /* D2: in hole, next data at offs */
> > +        *hole = start;
> > +        *data = offs;
> > +        return 0;
> > +    }
> > +
> > +    /* D1: in data, end not yet known */
> > +
> > +    /*
> > +     * SEEK_HOLE cases:
> > +     * H1. offs == start: start is in a hole
> > +     *     If this happens here, a hole has been dug behind our back
> > +     *     since the previous lseek().
> > +     * H2. offs > start: either start is in data, next hole at offs,
> > +     *                   or start is in trailing hole, EOF at offs
> > +     *     Linux treats trailing holes like any other hole: offs ==
> > +     *     start.  Solaris seeks to EOF instead: offs > start (blech).
> > +     *     If that happens here, a hole has been dug behind our back
> > +     *     since the previous lseek().
> > +     * H3. offs < 0, errno = ENXIO: start is beyond EOF
> > +     *     If this happens, the file has been truncated behind our
> > +     *     back since we opened it.  Treat it like a trailing hole.
> > +     * H4. offs < 0, errno != ENXIO: we learned nothing
> > +     *     Pretend we know nothing at all, i.e. "forget" about D1.
> > +     */
> > +    offs = glfs_lseek(s->fd, start, SEEK_HOLE);
> > +    if (offs < 0) {
> > +        return -errno;          /* D1 and (H3 or H4) */
> > +    }
> > +    assert(offs >= start);
> > +
> > +    if (offs > start) {
> > +        /*
> > +         * D1 and H2: either in data, next hole at offs, or it was in
> > +         * data but is now in a trailing hole.  In the latter case,
> > +         * all bets are off.  Treating it as if it there was data all
> > +         * the way to EOF is safe, so simply do that.
> > +         */
> > +        *data = start;
> > +        *hole = offs;
> > +        return 0;
> > +    }
> > +
> > +    /* D1 and H1 */
> > +    return -EBUSY;
> > +}
> > +
> > +/*
> > + * Returns the allocation status of the specified sectors.
> > + *
> > + * If 'sector_num' is beyond the end of the disk image the return value is > > 0
> > + * and 'pnum' is set to 0.
> > + *
> > + * 'pnum' is set to the number of sectors (including and immediately 
> > following
> > + * the specified sector) that are known to be in the same
> > + * allocated/unallocated state.
> > + *
> > + * 'nb_sectors' is the max value 'pnum' should be set to.  If nb_sectors 
> > goes
> > + * beyond the end of the disk image it will be clamped.
> > + *
> > + * (Based on raw_co_get_block_status() from raw-posix.c.)
> > + */
> > +static int64_t coroutine_fn qemu_gluster_co_get_block_status(
> > +   BlockDriverState *bs, int64_t sector_num, int nb_sectors, int *pnum,
> 
> Nit: a tab snuck in the above line, before "BlockDriverState" (tabs
> expanded to spaces in coding guidelines as well).

Oh, yuck :-/

Thanks for the review!
Niels


> > +        BlockDriverState **file)
> > +{
> > +    BDRVGlusterState *s = bs->opaque;
> > +    off_t start, data = 0, hole = 0;
> > +    int64_t total_size;
> > +    int ret = -EINVAL;
> > +
> > +    if (!s->fd) {
> > +        return ret;
> > +    }
> > +
> > +    start = sector_num * BDRV_SECTOR_SIZE;
> > +    total_size = bdrv_getlength(bs);
> > +    if (total_size < 0) {
> > +        return total_size;
> > +    } else if (start >= total_size) {
> > +        *pnum = 0;
> > +        return 0;
> > +    } else if (start + nb_sectors * BDRV_SECTOR_SIZE > total_size) {
> > +        nb_sectors = DIV_ROUND_UP(total_size - start, BDRV_SECTOR_SIZE);
> > +    }
> > +
> > +    ret = find_allocation(bs, start, &data, &hole);
> > +    if (ret == -ENXIO) {
> > +        /* Trailing hole */
> > +        *pnum = nb_sectors;
> > +        ret = BDRV_BLOCK_ZERO;
> > +    } else if (ret < 0) {
> > +        /* No info available, so pretend there are no holes */
> > +        *pnum = nb_sectors;
> > +        ret = BDRV_BLOCK_DATA;
> > +    } else if (data == start) {
> > +        /* On a data extent, compute sectors to the end of the extent,
> > +         * possibly including a partial sector at EOF. */
> > +        *pnum = MIN(nb_sectors, DIV_ROUND_UP(hole - start, 
> > BDRV_SECTOR_SIZE));
> > +        ret = BDRV_BLOCK_DATA;
> > +    } else {
> > +        /* On a hole, compute sectors to the beginning of the next extent. 
> >  */
> > +        assert(hole == start);
> > +        *pnum = MIN(nb_sectors, (data - start) / BDRV_SECTOR_SIZE);
> > +        ret = BDRV_BLOCK_ZERO;
> > +    }
> > +
> > +    *file = bs;
> > +
> > +    return ret | BDRV_BLOCK_OFFSET_VALID | start;
> > +}
> > +
> > +
> >  static QemuOptsList qemu_gluster_create_opts = {
> >      .name = "qemu-gluster-create-opts",
> >      .head = QTAILQ_HEAD_INITIALIZER(qemu_gluster_create_opts.head),
> > @@ -719,6 +901,7 @@ static BlockDriver bdrv_gluster = {
> >  #ifdef CONFIG_GLUSTERFS_ZEROFILL
> >      .bdrv_co_write_zeroes         = qemu_gluster_co_write_zeroes,
> >  #endif
> > +    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
> >      .create_opts                  = &qemu_gluster_create_opts,
> >  };
> >  
> > @@ -746,6 +929,7 @@ static BlockDriver bdrv_gluster_tcp = {
> >  #ifdef CONFIG_GLUSTERFS_ZEROFILL
> >      .bdrv_co_write_zeroes         = qemu_gluster_co_write_zeroes,
> >  #endif
> > +    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
> >      .create_opts                  = &qemu_gluster_create_opts,
> >  };
> >  
> > @@ -773,6 +957,7 @@ static BlockDriver bdrv_gluster_unix = {
> >  #ifdef CONFIG_GLUSTERFS_ZEROFILL
> >      .bdrv_co_write_zeroes         = qemu_gluster_co_write_zeroes,
> >  #endif
> > +    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
> >      .create_opts                  = &qemu_gluster_create_opts,
> >  };
> >  
> > @@ -800,6 +985,7 @@ static BlockDriver bdrv_gluster_rdma = {
> >  #ifdef CONFIG_GLUSTERFS_ZEROFILL
> >      .bdrv_co_write_zeroes         = qemu_gluster_co_write_zeroes,
> >  #endif
> > +    .bdrv_co_get_block_status     = qemu_gluster_co_get_block_status,
> >      .create_opts                  = &qemu_gluster_create_opts,
> >  };
> >  
> > -- 
> > 2.5.0
> > 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]