[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 09/11] ahci: handle LIST_ON and FIS_ON in map helpers
From: |
John Snow |
Subject: |
[Qemu-devel] [PULL 09/11] ahci: handle LIST_ON and FIS_ON in map helpers |
Date: |
Wed, 10 Feb 2016 14:38:07 -0500 |
Instead of relying on ahci_cond_start_engines to maintain the
engine status indicators itself, have the lower-layer CLB and FIS mapper
helpers do it themselves.
This makes the cond_start routine slightly nicer to read, and makes sure
that the status indicators will always be correct.
Signed-off-by: John Snow <address@hidden>
Message-id: address@hidden
---
hw/ide/ahci.c | 28 ++++++++++++++++++----------
1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/hw/ide/ahci.c b/hw/ide/ahci.c
index 3a95dad..ff338fe 100644
--- a/hw/ide/ahci.c
+++ b/hw/ide/ahci.c
@@ -210,9 +210,7 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
AHCIPortRegs *pr = &ad->port_regs;
if (pr->cmd & PORT_CMD_START) {
- if (ahci_map_clb_address(ad)) {
- pr->cmd |= PORT_CMD_LIST_ON;
- } else {
+ if (!ahci_map_clb_address(ad)) {
error_report("AHCI: Failed to start DMA engine: "
"bad command list buffer address");
return -1;
@@ -220,7 +218,6 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
} else if (pr->cmd & PORT_CMD_LIST_ON) {
if (allow_stop) {
ahci_unmap_clb_address(ad);
- pr->cmd = pr->cmd & ~(PORT_CMD_LIST_ON);
} else {
error_report("AHCI: DMA engine should be off, "
"but appears to still be running");
@@ -229,9 +226,7 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
}
if (pr->cmd & PORT_CMD_FIS_RX) {
- if (ahci_map_fis_address(ad)) {
- pr->cmd |= PORT_CMD_FIS_ON;
- } else {
+ if (!ahci_map_fis_address(ad)) {
error_report("AHCI: Failed to start FIS receive engine: "
"bad FIS receive buffer address");
return -1;
@@ -239,7 +234,6 @@ static int ahci_cond_start_engines(AHCIDevice *ad, bool
allow_stop)
} else if (pr->cmd & PORT_CMD_FIS_ON) {
if (allow_stop) {
ahci_unmap_fis_address(ad);
- pr->cmd = pr->cmd & ~(PORT_CMD_FIS_ON);
} else {
error_report("AHCI: FIS receive engine should be off, "
"but appears to still be running");
@@ -657,7 +651,13 @@ static bool ahci_map_fis_address(AHCIDevice *ad)
AHCIPortRegs *pr = &ad->port_regs;
map_page(ad->hba->as, &ad->res_fis,
((uint64_t)pr->fis_addr_hi << 32) | pr->fis_addr, 256);
- return ad->res_fis != NULL;
+ if (ad->res_fis != NULL) {
+ pr->cmd |= PORT_CMD_FIS_ON;
+ return true;
+ }
+
+ pr->cmd &= ~PORT_CMD_FIS_ON;
+ return false;
}
static void ahci_unmap_fis_address(AHCIDevice *ad)
@@ -666,6 +666,7 @@ static void ahci_unmap_fis_address(AHCIDevice *ad)
DPRINTF(ad->port_no, "Attempt to unmap NULL FIS address\n");
return;
}
+ ad->port_regs.cmd &= ~PORT_CMD_FIS_ON;
dma_memory_unmap(ad->hba->as, ad->res_fis, 256,
DMA_DIRECTION_FROM_DEVICE, 256);
ad->res_fis = NULL;
@@ -677,7 +678,13 @@ static bool ahci_map_clb_address(AHCIDevice *ad)
ad->cur_cmd = NULL;
map_page(ad->hba->as, &ad->lst,
((uint64_t)pr->lst_addr_hi << 32) | pr->lst_addr, 1024);
- return ad->lst != NULL;
+ if (ad->lst != NULL) {
+ pr->cmd |= PORT_CMD_LIST_ON;
+ return true;
+ }
+
+ pr->cmd &= ~PORT_CMD_LIST_ON;
+ return false;
}
static void ahci_unmap_clb_address(AHCIDevice *ad)
@@ -686,6 +693,7 @@ static void ahci_unmap_clb_address(AHCIDevice *ad)
DPRINTF(ad->port_no, "Attempt to unmap NULL CLB address\n");
return;
}
+ ad->port_regs.cmd &= ~PORT_CMD_LIST_ON;
dma_memory_unmap(ad->hba->as, ad->lst, 1024,
DMA_DIRECTION_FROM_DEVICE, 1024);
ad->lst = NULL;
--
2.4.3
- [Qemu-devel] [PULL 00/11] Ide patches, (continued)
- [Qemu-devel] [PULL 00/11] Ide patches, John Snow, 2016/02/10
- [Qemu-devel] [PULL 03/11] ide: move buffered DMA cancel to core, John Snow, 2016/02/10
- [Qemu-devel] [PULL 04/11] ide: replace blk_drain_all by blk_drain, John Snow, 2016/02/10
- [Qemu-devel] [PULL 02/11] ide: code motion, John Snow, 2016/02/10
- [Qemu-devel] [PULL 05/11] ide: Add silent DRQ cancellation, John Snow, 2016/02/10
- [Qemu-devel] [PULL 06/11] ide: fix device_reset to not ignore pending AIO, John Snow, 2016/02/10
- [Qemu-devel] [PULL 07/11] fdc: always compile-check debug prints, John Snow, 2016/02/10
- [Qemu-devel] [PULL 10/11] ahci: explicitly reject bad engine states on post_load, John Snow, 2016/02/10
- [Qemu-devel] [PULL 08/11] ahci: Do not unmap NULL addresses, John Snow, 2016/02/10
- [Qemu-devel] [PULL 09/11] ahci: handle LIST_ON and FIS_ON in map helpers,
John Snow <=
- [Qemu-devel] [PULL 11/11] ahci: prohibit "restarting" the FIS or CLB engines, John Snow, 2016/02/10