[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v5 7/8] hw/arm/sysbus-fdt: enable amd-xgbe dynam
From: |
Eric Auger |
Subject: |
Re: [Qemu-devel] [PATCH v5 7/8] hw/arm/sysbus-fdt: enable amd-xgbe dynamic instantiation |
Date: |
Mon, 1 Feb 2016 14:11:57 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.5.1 |
Hi Peter,
On 01/25/2016 03:33 PM, Peter Maydell wrote:
> On 18 January 2016 at 15:16, Eric Auger <address@hidden> wrote:
>> This patch allows the instantiation of the vfio-amd-xgbe device
>> from the QEMU command line (-device vfio-amd-xgbe,host="<device>").
>>
>> The guest is exposed with a device tree node that combines the description
>> of both XGBE and PHY (representation supported from 4.2 onwards kernel):
>> Documentation/devicetree/bindings/net/amd-xgbe.txt.
>>
>> There are 5 register regions, 6 interrupts including 4 optional
>> edge-sensitive per-channel interrupts.
>>
>> Some property values are inherited from host device tree. Host device tree
>> must feature a combined XGBE/PHY representation (>= 4.2 host kernel).
>>
>> 2 clock nodes (dma and ptp) also are created. It is checked those clocks
>> are fixed on host side.
>>
>> AMD XGBE node creation function has a dependency on vfio Linux header and
>> more generally node creation function for VFIO platform devices only make
>> sense with CONFIG_LINUX so let's protect this code with #ifdef CONFIG_LINUX.
>>
>> Signed-off-by: Eric Auger <address@hidden>
>
>> hw/arm/sysbus-fdt.c | 195
>> ++++++++++++++++++++++++++++++++++++++++++++++++++--
>> 1 file changed, 189 insertions(+), 6 deletions(-)
>
> I'll let it pass for this patchset, but this file is starting to
> get big, and probably needs some kind of split into common functions
> in one file and then a separate file for each pass-through device,
> if they're all going to require 200-odd lines to deal with.
That's understood. If you don't mind i would rather introduce that move
in a separate series then.
Thanks
Eric
>
>> +/**
>> + * sysfs_to_dt_name: convert the name found in sysfs into the node name
>> + * for instance e0900000.xgmac is converted into address@hidden
>> + * @sysfs_name: directory name in sysfs
>> + *
>> + * returns the device tree name upon success or NULL in case the sysfs name
>> + * does not match the expected format
>> + */
>> +static char *sysfs_to_dt_name(const char *sysfs_name)
>> +{
>> + gchar **substrings = g_strsplit(sysfs_name, ".", 2);
>> + char *dt_name = NULL;
>> +
>> + if (!substrings || !substrings[1] || !substrings[0]) {
>
> We should check substrings[0] before substrings[1], as otherwise
> if we're passed the empty string we'll index off the end of the
> vector.
>
>> + goto out;
>> + }
>> + dt_name = g_strdup_printf("address@hidden", substrings[1],
>> substrings[0]);
>> +out:
>> + g_strfreev(substrings);
>> + return dt_name;
>> +}
>> +
>> /* Device Specific Code */
>>
>> /**
>> @@ -243,9 +269,166 @@ fail_reg:
>> return ret;
>> }
>>
>> +
>> +/* AMD xgbe properties whose values are copied/pasted from host */
>> +static HostProperty amd_xgbe_copied_properties[] = {
>> + {"compatible", false},
>> + {"dma-coherent", true},
>> + {"amd,per-channel-interrupt", true},
>> + {"phy-mode", false},
>> + {"mac-address", true},
>> + {"amd,speed-set", false},
>> + {"amd,serdes-blwc", true},
>> + {"amd,serdes-cdr-rate", true},
>> + {"amd,serdes-pq-skew", true},
>> + {"amd,serdes-tx-amp", true},
>> + {"amd,serdes-dfe-tap-config", true},
>> + {"amd,serdes-dfe-tap-enable", true},
>> + {"clock-names", false},
>> +};
>> +
>> +/**
>> + * add_amd_xgbe_fdt_node
>> + *
>> + * Generates the combined xgbe/phy node following kernel >=4.2
>> + * binding documentation:
>> + * Documentation/devicetree/bindings/net/amd-xgbe.txt:
>> + * Also 2 clock nodes are created (dma and ptp)
>> + *
>> + * self-asserts in case of error
>
> "asserts".
>
>> + for (i = 0; i < vbasedev->num_irqs; i++) {
>> + irq_number = platform_bus_get_irqn(pbus, sbdev , i)
>> + + data->irq_start;
>> + irq_attr[3 * i] = cpu_to_be32(GIC_FDT_IRQ_TYPE_SPI);
>> + irq_attr[3 * i + 1] = cpu_to_be32(irq_number);
>> + /*
>> + * General device interrupt and PCS auto-negociation interrupts are
>
> "negotiation"
>
>> + * level-sensitive while the 4 per-channel interrupts are edge
>> + * sensitive
>> + */
>> + QLIST_FOREACH(intp, &vdev->intp_list, next) {
>> + if (intp->pin == i) {
>> + break;
>> + }
>> + }
>> + if (intp->flags & VFIO_IRQ_INFO_AUTOMASKED) {
>> + irq_attr[3 * i + 2] = cpu_to_be32(GIC_FDT_IRQ_FLAGS_LEVEL_HI);
>> + } else {
>> + irq_attr[3 * i + 2] = cpu_to_be32(GIC_FDT_IRQ_FLAGS_EDGE_LO_HI);
>> + }
>> + }
>> + qemu_fdt_setprop(guest_fdt, nodename, "interrupts",
>> + irq_attr, vbasedev->num_irqs * 3 * sizeof(uint32_t));
>> +
>> + g_free(host_fdt);
>> + g_strfreev(node_path);
>> + g_free(irq_attr);
>> + g_free(reg_attr);
>> + g_free(nodename);
>> + return 0;
>> +}
>> +
>> +#endif /* CONFIG_LINUX */
>> +
>> /* list of supported dynamic sysbus devices */
>> static const NodeCreationPair add_fdt_node_functions[] = {
>> +#ifdef CONFIG_LINUX
>> {TYPE_VFIO_CALXEDA_XGMAC, add_calxeda_midway_xgmac_fdt_node},
>> + {TYPE_VFIO_AMD_XGBE, add_amd_xgbe_fdt_node},
>> +#endif
>> {"", NULL}, /* last element */
>> };
>
> thanks
> -- PMM
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v5 7/8] hw/arm/sysbus-fdt: enable amd-xgbe dynamic instantiation,
Eric Auger <=