Re: [Qemu-devel] [PATCH V6 8/8] arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma

[Frederic Konrad]

On 16/01/2016 02:50, Alistair Francis wrote:
> On Mon, Jan 4, 2016 at 10:25 AM,  <address@hidden> wrote:
>> From: KONRAD Frederic <address@hidden>
>>
>> This adds the DP and the DPDMA to the Zynq MP platform.
>>
>> Signed-off-by: KONRAD Frederic <address@hidden>
>> Reviewed-by: Peter Crosthwaite <address@hidden>
>> Tested-By: Hyun Kwon <address@hidden>
>> ---
>>  hw/arm/xlnx-zynqmp.c         | 30 ++++++++++++++++++++++++++++++
>>  include/hw/arm/xlnx-zynqmp.h |  5 +++++
>>  2 files changed, 35 insertions(+)
>>
>> diff --git a/hw/arm/xlnx-zynqmp.c b/hw/arm/xlnx-zynqmp.c
>> index 87553bb..ce9919f 100644
>> --- a/hw/arm/xlnx-zynqmp.c
>> +++ b/hw/arm/xlnx-zynqmp.c
>> @@ -32,6 +32,12 @@
>>  #define SATA_ADDR           0xFD0C0000
>>  #define SATA_NUM_PORTS      2
>>
>> +#define DP_ADDR             0xfd4a0000
>> +#define DP_IRQ              113
>> +
>> +#define DPDMA_ADDR          0xfd4c0000
>> +#define DPDMA_IRQ           116
>> +
>>  static const uint64_t gem_addr[XLNX_ZYNQMP_NUM_GEMS] = {
>>      0xFF0B0000, 0xFF0C0000, 0xFF0D0000, 0xFF0E0000,
>>  };
>> @@ -112,6 +118,12 @@ static void xlnx_zynqmp_init(Object *obj)
>>          qdev_set_parent_bus(DEVICE(&s->sdhci[i]),
>>                              sysbus_get_default());
>>      }
>> +
>> +    object_initialize(&s->dp, sizeof(s->dp), TYPE_XLNX_DP);
>> +    qdev_set_parent_bus(DEVICE(&s->dp), sysbus_get_default());
>> +
>> +    object_initialize(&s->dpdma, sizeof(s->dpdma), TYPE_XLNX_DPDMA);
>> +    qdev_set_parent_bus(DEVICE(&s->dpdma), sysbus_get_default());
>>  }
>>
>>  static void xlnx_zynqmp_realize(DeviceState *dev, Error **errp)
>> @@ -286,6 +298,24 @@ static void xlnx_zynqmp_realize(DeviceState *dev, Error 
>> **errp)
>>          sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci[i]), 0,
>>                             gic_spi[sdhci_intr[i]]);
>>      }
>> +
>> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->dp), 0, DP_ADDR);
>> +    sysbus_connect_irq(SYS_BUS_DEVICE(&s->dp), 0, gic_spi[DP_IRQ]);
>> +
>> +    sysbus_mmio_map(SYS_BUS_DEVICE(&s->dpdma), 0, DPDMA_ADDR);
>> +    sysbus_connect_irq(SYS_BUS_DEVICE(&s->dpdma), 0, gic_spi[DPDMA_IRQ]);
>> +    object_property_set_bool(OBJECT(&s->dp), true, "realized", &err);
>> +    if (err) {
>> +        error_propagate(errp, err);
>> +        return;
>> +    }
>> +    object_property_set_bool(OBJECT(&s->dpdma), true, "realized", &err);
>> +    if (err) {
>> +        error_propagate(errp, err);
>> +        return;
>> +    }
> Can you set the device as realized before the sysbus connections? That
> is how every other device does it.
Ok will do that.

>
>> +    object_property_set_link(OBJECT(&s->dp), OBJECT(&s->dpdma), "dpdma",
>> +                             &error_abort);
>>  }
>>
>>  static Property xlnx_zynqmp_props[] = {
>> diff --git a/include/hw/arm/xlnx-zynqmp.h b/include/hw/arm/xlnx-zynqmp.h
>> index d116092..e683eaf 100644
>> --- a/include/hw/arm/xlnx-zynqmp.h
>> +++ b/include/hw/arm/xlnx-zynqmp.h
>> @@ -25,6 +25,8 @@
>>  #include "hw/ide/pci.h"
>>  #include "hw/ide/ahci.h"
>>  #include "hw/sd/sdhci.h"
>> +#include "hw/dma/xlnx_dpdma.h"
>> +#include "hw/display/xlnx_dp.h"
>>
>>  #define TYPE_XLNX_ZYNQMP "xlnx,zynqmp"
>>  #define XLNX_ZYNQMP(obj) OBJECT_CHECK(XlnxZynqMPState, (obj), \
>> @@ -69,6 +71,9 @@ typedef struct XlnxZynqMPState {
>>
>>      char *boot_cpu;
>>      ARMCPU *boot_cpu_ptr;
>> +
>> +    XlnxDPState dp;
>> +    XlnxDPDMAState dpdma;
> Can you also move these up so they are with the rest of the devices?
yes

>
> Otherwise:
>
> Reviewed-by: Alistair Francis <address@hidden>
>
> Thanks,
>
> Alistair
>
>>  }  XlnxZynqMPState;
>>
>>  #define XLNX_ZYNQMP_H
>> --
>> 1.9.0
>>
>>