[Qemu-devel] [PATCH 6/6] i.MX: Add sabrelite i.MX6 emulation.

[Jean-Christophe Dubois]

Signed-off-by: Jean-Christophe Dubois <address@hidden>
---
 hw/arm/Makefile.objs |  2 +-
 hw/arm/sabrelite.c   | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 94 insertions(+), 1 deletion(-)
 create mode 100644 hw/arm/sabrelite.c

diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index ac383df..fc1df45 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -15,4 +15,4 @@ obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
 obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-ep108.o
 obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
 obj-$(CONFIG_FSL_IMX31) += fsl-imx31.o kzm.o
-obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o
+obj-$(CONFIG_FSL_IMX6) += fsl-imx6.o sabrelite.o
diff --git a/hw/arm/sabrelite.c b/hw/arm/sabrelite.c
new file mode 100644
index 0000000..4e0c3fb
--- /dev/null
+++ b/hw/arm/sabrelite.c
@@ -0,0 +1,93 @@
+/*
+ * SABRELITE Board System emulation.
+ *
+ * Copyright (c) 2015 Jean-Christophe Dubois <address@hidden>
+ *
+ * This code is licensed under the GPL, version 2 or later.
+ * See the file `COPYING' in the top level directory.
+ *
+ * It (partially) emulates a sabrelite board, with a Freescale
+ * i.MX6 SoC
+ */
+
+#include "hw/arm/fsl-imx6.h"
+#include "hw/boards.h"
+#include "qemu/error-report.h"
+#include "exec/address-spaces.h"
+#include "net/net.h"
+#include "hw/devices.h"
+#include "hw/char/serial.h"
+#include "sysemu/qtest.h"
+
+typedef struct IMX6Sabrelite {
+    FslIMX6State soc;
+    MemoryRegion ram;
+} IMX6Sabrelite;
+
+static struct arm_boot_info sabrelite_binfo = {
+    /* DDR memory start */
+    .loader_start = FSL_IMX6_MMDC_ADDR,
+    /* No board ID, we boot from DT tree */
+    .board_id = -1,
+};
+
+/* No need to do any particulat setup for secondary boot */
+static void sabrelite_write_secondary(ARMCPU *cpu,
+                                      const struct arm_boot_info *info)
+{
+}
+
+/* Secondary cores are reseted through SRC device */
+static void sabrelite_reset_secondary(ARMCPU *cpu,
+                                      const struct arm_boot_info *info)
+{
+}
+
+static void sabrelite_init(MachineState *machine)
+{
+    IMX6Sabrelite *s = g_new0(IMX6Sabrelite, 1);
+    Error *err = NULL;
+
+    object_initialize(&s->soc, sizeof(s->soc), TYPE_FSL_IMX6);
+    object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+                              &error_abort);
+
+    object_property_set_bool(OBJECT(&s->soc), true, "realized", &err);
+    if (err != NULL) {
+        error_report("%s", error_get_pretty(err));
+        exit(1);
+    }
+
+    /* Check the amount of memory is compatible with the SOC */
+    if (machine->ram_size > FSL_IMX6_MMDC_SIZE) {
+        error_report("WARNING: RAM size " RAM_ADDR_FMT " above max supported, "
+                     "reduced to %x", machine->ram_size, FSL_IMX6_MMDC_SIZE);
+        machine->ram_size = FSL_IMX6_MMDC_SIZE;
+    }
+
+    memory_region_allocate_system_memory(&s->ram, NULL, "sabrelite.ram",
+                                         machine->ram_size);
+    memory_region_add_subregion(get_system_memory(), FSL_IMX6_MMDC_ADDR,
+                                &s->ram);
+
+    sabrelite_binfo.ram_size = machine->ram_size;
+    sabrelite_binfo.kernel_filename = machine->kernel_filename;
+    sabrelite_binfo.kernel_cmdline = machine->kernel_cmdline;
+    sabrelite_binfo.initrd_filename = machine->initrd_filename;
+    sabrelite_binfo.nb_cpus = smp_cpus;
+    sabrelite_binfo.write_secondary_boot = sabrelite_write_secondary;
+    sabrelite_binfo.secondary_cpu_reset_hook = sabrelite_reset_secondary;
+
+    if (!qtest_enabled()) {
+        arm_load_kernel(&s->soc.cpu[0], &sabrelite_binfo);
+    }
+}
+
+static void sabrelite_machine_init(MachineClass *mc)
+{
+    mc->desc = "Freescale i.MX6 Quad SABRE Lite Board (Cortex A9)";
+    mc->init = sabrelite_init;
+    mc->max_cpus = FSL_IMX6_NUM_CPUS;
+}
+
+DEFINE_MACHINE("sabrelite", sabrelite_machine_init)
-- 
2.5.0