[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v14 Resend 12/13] vfio-pci: pass the aer error to gu
From: |
Cao jin |
Subject: |
[Qemu-devel] [PATCH v14 Resend 12/13] vfio-pci: pass the aer error to guest |
Date: |
Thu, 17 Dec 2015 09:41:53 +0800 |
From: Chen Fan <address@hidden>
when the vfio device encounters an uncorrectable error in host,
the vfio_pci driver will signal the eventfd registered by this
vfio device, the results in the qemu eventfd handler getting
invoked.
this patch is to pass the error to guest and have the guest driver
recover from the error.
Signed-off-by: Chen Fan <address@hidden>
---
hw/vfio/pci.c | 53 +++++++++++++++++++++++++++++++++++++++++++++++------
1 file changed, 47 insertions(+), 6 deletions(-)
diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
index df32618..c1300e9 100644
--- a/hw/vfio/pci.c
+++ b/hw/vfio/pci.c
@@ -2543,18 +2543,59 @@ static void vfio_put_device(VFIOPCIDevice *vdev)
static void vfio_err_notifier_handler(void *opaque)
{
VFIOPCIDevice *vdev = opaque;
+ PCIDevice *dev = &vdev->pdev;
+ PCIEAERMsg msg = {
+ .severity = 0,
+ .source_id = (pci_bus_num(dev->bus) << 8) | dev->devfn,
+ };
if (!event_notifier_test_and_clear(&vdev->err_notifier)) {
return;
}
/*
- * TBD. Retrieve the error details and decide what action
- * needs to be taken. One of the actions could be to pass
- * the error to the guest and have the guest driver recover
- * from the error. This requires that PCIe capabilities be
- * exposed to the guest. For now, we just terminate the
- * guest to contain the error.
+ * in case the real hardware configration has been changed,
+ * here we should recheck the bus reset capability.
+ */
+ if ((vdev->features & VFIO_FEATURE_ENABLE_AER) &&
+ vfio_check_host_bus_reset(vdev)) {
+ goto stop;
+ }
+ /*
+ * we should read the error details from the real hardware
+ * configuration spaces, here we only need to do is signaling
+ * to guest an uncorrectable error has occurred.
+ */
+ if ((vdev->features & VFIO_FEATURE_ENABLE_AER) &&
+ dev->exp.aer_cap) {
+ uint8_t *aer_cap = dev->config + dev->exp.aer_cap;
+ uint32_t uncor_status;
+ bool isfatal;
+
+ uncor_status = vfio_pci_read_config(dev,
+ dev->exp.aer_cap + PCI_ERR_UNCOR_STATUS, 4);
+
+ /*
+ * if we receive the error signal but not this device, we can
+ * just ignore it.
+ */
+ if (!(uncor_status & ~0UL)) {
+ return;
+ }
+
+ isfatal = uncor_status & pci_get_long(aer_cap + PCI_ERR_UNCOR_SEVER);
+
+ msg.severity = isfatal ? PCI_ERR_ROOT_CMD_FATAL_EN :
+ PCI_ERR_ROOT_CMD_NONFATAL_EN;
+
+ pcie_aer_msg(dev, &msg);
+ return;
+ }
+
+stop:
+ /*
+ * If the aer capability is not exposed to the guest. we just
+ * terminate the guest to contain the error.
*/
error_report("%s(%04x:%02x:%02x.%x) Unrecoverable error detected. "
--
1.9.3
- [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, (continued)
- [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Cao jin, 2015/12/16
- Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Alex Williamson, 2015/12/17
- Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Chen Fan, 2015/12/17
- Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Alex Williamson, 2015/12/21
- Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Chen Fan, 2015/12/22
- Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Chen Fan, 2015/12/24
- Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Michael S. Tsirkin, 2015/12/24
Re: [Qemu-devel] [PATCH v14 Resend 10/13] pci: add pci device pre-post reset callbacks for host bus reset, Michael S. Tsirkin, 2015/12/23
[Qemu-devel] [PATCH v14 Resend 11/13] pcie_aer: expose pcie_aer_msg() interface, Cao jin, 2015/12/16
[Qemu-devel] [PATCH v14 Resend 12/13] vfio-pci: pass the aer error to guest,
Cao jin <=
[Qemu-devel] [PATCH v14 Resend 13/13] vfio: add 'aer' property to expose aercap, Cao jin, 2015/12/16
[Qemu-devel] [PATCH v14 Resend 09/13] add check reset mechanism when hotplug vfio device, Cao jin, 2015/12/16
[Qemu-devel] [PATCH v14 Resend 07/13] vfio: add aer support for vfio device, Cao jin, 2015/12/16
[Qemu-devel] [PATCH v14 Resend 08/13] vfio: add check host bus reset is support or not, Cao jin, 2015/12/16