[Qemu-devel] [PATCH 3/3] sdhci: add optional quirk property to disable card insertion/removal interrupts

[Andrew Baumann]

This is needed for a quirk of the Raspberry Pi (bcm2835/6) MMC
controller, where the card insert bit is documented as unimplemented
(always reads zero, doesn't generate interrupts) but is in fact
observed on hardware as set at power on, but is cleared (and remains
clear) on subsequent controller resets.

Signed-off-by: Andrew Baumann <address@hidden>
---
 hw/sd/sdhci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index dd83e89..61f919b 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -193,7 +193,9 @@ static void sdhci_reset(SDHCIState *s)
      * initialization */
     memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - 
(uintptr_t)&s->sdmasysad);
 
-    sd_set_cb(s->card, s->ro_cb, s->eject_cb);
+    if (!s->noeject_quirk) {
+        sd_set_cb(s->card, s->ro_cb, s->eject_cb);
+    }
     s->data_count = 0;
     s->stopped_state = sdhc_not_stopped;
 }
@@ -1208,6 +1210,7 @@ const VMStateDescription sdhci_vmstate = {
         VMSTATE_UINT16(data_count, SDHCIState),
         VMSTATE_UINT64(admasysaddr, SDHCIState),
         VMSTATE_UINT8(stopped_state, SDHCIState),
+        VMSTATE_BOOL(noeject_quirk, SDHCIState),
         VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, 0, buf_maxsz),
         VMSTATE_TIMER_PTR(insert_timer, SDHCIState),
         VMSTATE_TIMER_PTR(transfer_timer, SDHCIState),
@@ -1276,6 +1279,7 @@ static Property sdhci_sysbus_properties[] = {
     DEFINE_PROP_UINT32("capareg", SDHCIState, capareg,
             SDHC_CAPAB_REG_DEFAULT),
     DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0),
+    DEFINE_PROP_BOOL("noeject-quirk", SDHCIState, noeject_quirk, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
-- 
2.5.3