[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH for-2.5 v1 3/4] arm: highbank: Implement PSCI an
From: |
Rob Herring |
Subject: |
Re: [Qemu-devel] [PATCH for-2.5 v1 3/4] arm: highbank: Implement PSCI and dummy monitor |
Date: |
Tue, 27 Oct 2015 15:29:37 -0500 |
On Sun, Oct 25, 2015 at 6:13 PM, Peter Crosthwaite
<address@hidden> wrote:
> Firstly, enable monitor mode and PSCI, both are which are features of
> this board.
>
> In addition to PSCI, this board also uses SMC for cache maintainence
> ops. This means we need a secure monitor to catch these and nop them.
> Use the ARM boot board-setup feature to implement this.
>
> Signed-off-by: Peter Crosthwaite <address@hidden>
Thanks for doing this. I'm not a big fan of how the machine code for
boot code is embedded into C in qemu, but that's a separate issue.
Acked-by: Rob Herring <address@hidden>
> ---
> Changed since RFC:
> Use bootloader callback to load blob.
> Change "firmware" to "board-setup" for consistency.
> Tweak commit message.
>
> hw/arm/highbank.c | 57
> ++++++++++++++++++++++++++++++++++++++++++++-----------
> 1 file changed, 46 insertions(+), 11 deletions(-)
>
> diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
> index be04b27..98daba0 100644
> --- a/hw/arm/highbank.c
> +++ b/hw/arm/highbank.c
> @@ -28,6 +28,9 @@
> #include "exec/address-spaces.h"
> #include "qemu/error-report.h"
>
> +#define BOARD_SETUP_ADDR 0x0
> +#define LOAD_ADDR 0x1000
> +
> #define SMP_BOOT_ADDR 0x100
> #define SMP_BOOT_REG 0x40
> #define MPCORE_PERIPHBASE 0xfff10000
> @@ -36,6 +39,38 @@
>
> /* Board init. */
>
> +static void hb_write_board_setup(ARMCPU *cpu,
> + const struct arm_boot_info *info)
> +{
> + int n;
> + uint32_t board_setup_blob[] = {
> + /* Reset */
> + 0xe320f000, /* nop */
> + 0xe320f000, /* nop */
> + /* smc */
> + 0xe10f0000, /* mrs r0, CPSR */
> + 0xe200001f, /* and r0, r0, #0x1f - mask off mode bits */
> + 0xe3500016, /* cmp r0, #0x16 - are we in monitor mode? */
> + /* if (!monitor_mode) { */
> + 0x11600070, /* smcne - go to monitor mode */
> + 0x112fff1e, /* bxne lr - return to caller */
> + /* } */
> + /* do setup from monitor mode */
> + 0xe3a00000 + BOARD_SETUP_ADDR, /* mov r0, #BOARD_SETUP_ADDR */
> + 0xee0c0f30, /* mcr p15, 0, r0, c12, c0, 1 - set mvbar */
> + 0xe58fe008, /* save lr */
> + 0xe8dfc000, /* exception return */
> + 0,
> + 0,
> + 0, /* exception return link will end up here */
> + };
> + for (n = 0; n < ARRAY_SIZE(board_setup_blob); n++) {
> + board_setup_blob[n] = tswap32(board_setup_blob[n]);
> + }
> + rom_add_blob_fixed("board-setup", board_setup_blob,
> + sizeof(board_setup_blob), BOARD_SETUP_ADDR);
> +}
> +
> static void hb_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info)
> {
> int n;
> @@ -248,16 +283,13 @@ static void calxeda_init(MachineState *machine, enum
> cxmachines machine_id)
> cpuobj = object_new(object_class_get_name(oc));
> cpu = ARM_CPU(cpuobj);
>
> - /* By default A9 and A15 CPUs have EL3 enabled. This board does not
> - * currently support EL3 so the CPU EL3 property is disabled before
> - * realization.
> - */
> - if (object_property_find(cpuobj, "has_el3", NULL)) {
> - object_property_set_bool(cpuobj, false, "has_el3", &err);
> - if (err) {
> - error_report_err(err);
> - exit(1);
> - }
> + object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_SMC,
> + "psci-conduit", &error_abort);
> +
> + if (n) {
> + /* Secondary CPUs start in PSCI powered-down state */
> + object_property_set_bool(cpuobj, true,
> + "start-powered-off", &error_abort);
> }
>
> if (object_property_find(cpuobj, "reset-cbar", NULL)) {
> @@ -375,9 +407,12 @@ static void calxeda_init(MachineState *machine, enum
> cxmachines machine_id)
> */
> highbank_binfo.board_id = -1;
> highbank_binfo.nb_cpus = smp_cpus;
> - highbank_binfo.loader_start = 0;
> + highbank_binfo.loader_start = LOAD_ADDR;
> highbank_binfo.write_secondary_boot = hb_write_secondary;
> highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
> + highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR;
> + highbank_binfo.write_board_setup = hb_write_board_setup;
> +
> arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
> }
>
> --
> 1.9.1
>
[Qemu-devel] [PATCH for-2.5 v1 4/4] arm: xilinx_zynq: Add linux pre-boot, Peter Crosthwaite, 2015/10/25