Re: [Qemu-devel] [PATCH v2 1/8] i.MX: Standardize i.MX serial debug.

[Peter Crosthwaite]

On Wed, Oct 21, 2015 at 2:35 PM, Jean-Christophe Dubois
<address@hidden> wrote:
> The goal is to have debug code always compiled during build.
>
> We standardize all debug output on the following format:
>
> [QOM_TYPE_NAME]reporting_function: debug message
>
> We also replace IPRINTF with qemu_log_mask(). The qemu_log_mask() output
> is following the same format as the above debug.
>
> Signed-off-by: Jean-Christophe Dubois <address@hidden>
> ---
>
> Changes since v1:
>  * use HWADDR_PRIx for address formating
>  * standardize qemu_log_mask on same model.
>
>  hw/char/imx_serial.c | 57 
> ++++++++++++++++++++++++++--------------------------
>  1 file changed, 29 insertions(+), 28 deletions(-)
>
> diff --git a/hw/char/imx_serial.c b/hw/char/imx_serial.c
> index f0c4c72..73e8eb3 100644
> --- a/hw/char/imx_serial.c
> +++ b/hw/char/imx_serial.c
> @@ -22,25 +22,17 @@
>  #include "sysemu/sysemu.h"
>  #include "sysemu/char.h"
>
> -//#define DEBUG_SERIAL 1
> -#ifdef DEBUG_SERIAL
> -#define DPRINTF(fmt, args...) \
> -do { printf("%s: " fmt , TYPE_IMX_SERIAL, ##args); } while (0)
> -#else
> -#define DPRINTF(fmt, args...) do {} while (0)
> +#ifndef DEBUG_IMX_UART
> +#define DEBUG_IMX_UART 0
>  #endif
>
> -/*
> - * Define to 1 for messages about attempts to
> - * access unimplemented registers or similar.
> - */
> -//#define DEBUG_IMPLEMENTATION 1
> -#ifdef DEBUG_IMPLEMENTATION
> -#  define IPRINTF(fmt, args...) \
> -    do  { fprintf(stderr, "%s: " fmt, TYPE_IMX_SERIAL, ##args); } while (0)
> -#else
> -#  define IPRINTF(fmt, args...) do {} while (0)
> -#endif
> +#define DPRINTF(fmt, args...) \
> +          do { \
> +              if (DEBUG_IMX_UART) { \
> +                  fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SERIAL, \
> +                                                   __func__, ##args); \
> +              } \
> +          } while (0)
>
>  static const VMStateDescription vmstate_imx_serial = {
>      .name = TYPE_IMX_SERIAL,
> @@ -113,10 +105,12 @@ static uint64_t imx_serial_read(void *opaque, hwaddr 
> offset,
>                                  unsigned size)
>  {
>      IMXSerialState *s = (IMXSerialState *)opaque;
> +    uint32_t reg = offset >> 2;

Why the new variable? If anything, your change seems to have obsoleted
the need for a reg variable as you reduce the usage-count of (offset
>> 2) to just one (in the switch) where it vould stay inline as in
original code. Unless I am missing something?

With just that change (reverting)

Reviewed-by: Peter Crosthwaite <address@hidden>

Regards,
Peter

>      uint32_t c;
>
> -    DPRINTF("read(offset=%x)\n", offset >> 2);
> -    switch (offset >> 2) {
> +    DPRINTF("read(offset=0x%" HWADDR_PRIx ")\n", offset);
> +
> +    switch (reg) {
>      case 0x0: /* URXD */
>          c = s->readbuff;
>          if (!(s->uts1 & UTS1_RXEMPTY)) {
> @@ -167,7 +161,8 @@ static uint64_t imx_serial_read(void *opaque, hwaddr 
> offset,
>          return 0x0; /* TODO */
>
>      default:
> -        IPRINTF("%s: bad offset: 0x%x\n", __func__, (int)offset);
> +       qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
> +                      HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
>          return 0;
>      }
>  }
> @@ -176,13 +171,13 @@ static void imx_serial_write(void *opaque, hwaddr 
> offset,
>                               uint64_t value, unsigned size)
>  {
>      IMXSerialState *s = (IMXSerialState *)opaque;
> +    uint32_t reg = offset >> 2;
>      unsigned char ch;
>
> -    DPRINTF("write(offset=%x, value = %x) to %s\n",
> -            offset >> 2,
> -            (unsigned int)value, s->chr ? s->chr->label : "NODEV");
> +    DPRINTF("write(offset=0x%" HWADDR_PRIx ", value = 0x%x) to %s\n",
> +            offset, (unsigned int)value, s->chr ? s->chr->label : "NODEV");
>
> -    switch (offset >> 2) {
> +    switch (reg) {
>      case 0x10: /* UTXD */
>          ch = value;
>          if (s->ucr2 & UCR2_TXEN) {
> @@ -198,7 +193,9 @@ static void imx_serial_write(void *opaque, hwaddr offset,
>
>      case 0x20: /* UCR1 */
>          s->ucr1 = value & 0xffff;
> +
>          DPRINTF("write(ucr1=%x)\n", (unsigned int)value);
> +
>          imx_update(s);
>          break;
>
> @@ -266,12 +263,14 @@ static void imx_serial_write(void *opaque, hwaddr 
> offset,
>
>      case 0x2d: /* UTS1 */
>      case 0x23: /* UCR4 */
> -        IPRINTF("Unimplemented Register %x written to\n", offset >> 2);
> +       qemu_log_mask(LOG_UNIMP, "[%s]%s: Unimplemented reg %d\n",
> +                      TYPE_IMX_SERIAL, __func__, reg);
>          /* TODO */
>          break;
>
>      default:
> -        IPRINTF("%s: Bad offset 0x%x\n", __func__, (int)offset);
> +       qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
> +                      HWADDR_PRIx "\n", TYPE_IMX_SERIAL, __func__, offset);
>      }
>  }
>
> @@ -284,7 +283,9 @@ static int imx_can_receive(void *opaque)
>  static void imx_put_data(void *opaque, uint32_t value)
>  {
>      IMXSerialState *s = (IMXSerialState *)opaque;
> +
>      DPRINTF("received char\n");
> +
>      s->usr1 |= USR1_RRDY;
>      s->usr2 |= USR2_RDR;
>      s->uts1 &= ~UTS1_RXEMPTY;
> @@ -319,8 +320,8 @@ static void imx_serial_realize(DeviceState *dev, Error 
> **errp)
>          qemu_chr_add_handlers(s->chr, imx_can_receive, imx_receive,
>                                imx_event, s);
>      } else {
> -        DPRINTF("No char dev for uart at 0x%lx\n",
> -                (unsigned long)s->iomem.ram_addr);
> +        DPRINTF("No char dev for uart at 0x%" HWADDR_PRIx "\n",
> +                s->iomem.ram_addr);
>      }
>  }
>
> --
> 2.1.4
>