[Qemu-devel] [RFC 2/3] arm: highbank: Implement dummy monitor

[Peter Crosthwaite]

Firstly, enable monitor mode and PSCI, both are which are features of
this board.

In addition to PSCI, this board also uses SMC for cache maintainence
ops. This means we need a secure monitor to catch these and nop them.
Use the ARM boot board setup blob to implement this.

FIXME: The blob population should be made Linux specific.

Signed-off-by: Peter Crosthwaite <address@hidden>
---
 hw/arm/highbank.c | 56 ++++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 45 insertions(+), 11 deletions(-)

diff --git a/hw/arm/highbank.c b/hw/arm/highbank.c
index be04b27..1fca057 100644
--- a/hw/arm/highbank.c
+++ b/hw/arm/highbank.c
@@ -28,6 +28,9 @@
 #include "exec/address-spaces.h"
 #include "qemu/error-report.h"
 
+#define FW_BLOB_ADDR            0x0
+#define LOAD_ADDR               0x1000
+
 #define SMP_BOOT_ADDR           0x100
 #define SMP_BOOT_REG            0x40
 #define MPCORE_PERIPHBASE       0xfff10000
@@ -36,6 +39,36 @@
 
 /* Board init.  */
 
+static void hb_write_fw_blob(void)
+{
+    int n;
+    uint32_t fw_blob[] = {
+        /* Reset */
+        0xe320f000, /* nop */
+        0xe320f000, /* nop */
+        /* smc */
+        0xe10f0000, /* mrs r0, CPSR */
+        0xe200001f, /* and r0, r0, #0x1f - mask off mode bits */
+        0xe3500016, /* cmp r0, #0x16 - are we in monitor mode? */
+        /* if (!monitor_mode) { */
+            0x11600070, /* smcne - go to monitor mode */
+            0x112fff1e, /* bxne lr - return to caller */
+        /* } */
+        /* do setup from monitor mode */
+        0xe3a00000 + FW_BLOB_ADDR, /* mov r0, #FW_BLOB_ADDR */
+        0xee0c0f30, /* mcr p15, 0, r0, c12, c0, 1 - set mvbar */
+        0xe58fe008, /* save lr */
+        0xe8dfc000, /* exception return */
+        0,
+        0,
+        0, /* exception return link will end up here */
+    };
+    for (n = 0; n < ARRAY_SIZE(fw_blob); n++) {
+        fw_blob[n] = tswap32(fw_blob[n]);
+    }
+    rom_add_blob_fixed("firmware", fw_blob, sizeof(fw_blob), FW_BLOB_ADDR);
+}
+
 static void hb_write_secondary(ARMCPU *cpu, const struct arm_boot_info *info)
 {
     int n;
@@ -248,16 +281,13 @@ static void calxeda_init(MachineState *machine, enum 
cxmachines machine_id)
         cpuobj = object_new(object_class_get_name(oc));
         cpu = ARM_CPU(cpuobj);
 
-        /* By default A9 and A15 CPUs have EL3 enabled.  This board does not
-         * currently support EL3 so the CPU EL3 property is disabled before
-         * realization.
-         */
-        if (object_property_find(cpuobj, "has_el3", NULL)) {
-            object_property_set_bool(cpuobj, false, "has_el3", &err);
-            if (err) {
-                error_report_err(err);
-                exit(1);
-            }
+        object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_SMC,
+                                "psci-conduit", &error_abort);
+
+        if (n) {
+            /* Secondary CPUs start in PSCI powered-down state */
+            object_property_set_bool(cpuobj, true,
+                                     "start-powered-off", &error_abort);
         }
 
         if (object_property_find(cpuobj, "reset-cbar", NULL)) {
@@ -375,9 +405,13 @@ static void calxeda_init(MachineState *machine, enum 
cxmachines machine_id)
      */
     highbank_binfo.board_id = -1;
     highbank_binfo.nb_cpus = smp_cpus;
-    highbank_binfo.loader_start = 0;
+    highbank_binfo.loader_start = LOAD_ADDR;
     highbank_binfo.write_secondary_boot = hb_write_secondary;
     highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
+    highbank_binfo.board_setup_blob = true;
+    highbank_binfo.board_setup_blob_addr = FW_BLOB_ADDR;
+
+    hb_write_fw_blob();
     arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
 }
 
-- 
1.9.1