qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1471583] Re: QCA988X Wifi Card Not PCI Passing Through


From: bill
Subject: [Qemu-devel] [Bug 1471583] Re: QCA988X Wifi Card Not PCI Passing Through
Date: Mon, 06 Jul 2015 15:00:03 -0000

You mean 'a patch and recompile to the -guest- kernel'?  Otherwise I'm
confused.

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1471583

Title:
  QCA988X Wifi Card Not PCI Passing Through

Status in QEMU:
  New

Bug description:
  CPU:  Intel(R) Xeon(R) CPU E3-1265L v3 @ 2.50GHz
  KVM:  qemu-kvm-1.5.3-86.el7_1.2.x86_64
  Kernel:  4.1.1-1.el7.elrepo.x86_64, and kernel-3.10.0-229.7.2.el7.x86_64
  Host & Guest: CentOS 7.1
  Using virt-manager-1.1.0-12.el7.noarch to create, configure, and start guest

  I am trying to do a PCI passthrough of a QCA988X wifi card.  It's a Doodle 
Labs military-grade 802.11ac miniPCI card, which uses the ath10k kernel driver. 
 This card configures nicely on the host, and seems to pass through to the 
guest, but early in the boot of the guest it says "Unknown header type" at the 
wifi's bus address.  And sure enough, lspci -vv on the host then shows:
          !!! Unknown header type 7f
          Kernel driver in use: vfio-pci

  When the guest has booted, of course it shows as an Unclassified
  device.  Host and guest must run at least kernel 4.0 so the wifi
  card's current firmware will load, and so that its driver comes with
  the kernel.  I have both host and guest set up for the wifi card.  I
  tried running kernel 3.10 in the host and passing through the PCI
  device, but same behavior.

  I am passing through to the guest an Intel i350 ethernet card just
  fine, in fact I'm passing through two of its SR-IOV virt interfaces to
  the guest, so that works.

  On the host, before I start the guest, the wifi card looks like this
  (lspci -vv):

  0a:00.0 Network controller: Qualcomm Atheros QCA988x 802.11ac Wireless 
Network Adapter
          Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
          Latency: 0, Cache Line Size: 64 bytes
          Interrupt: pin A routed to IRQ 43
          Region 0: Memory at f7000000 (64-bit, non-prefetchable) [size=2M]
          Expansion ROM at f7200000 [disabled] [size=64K]
          Capabilities: [40] Power Management version 2
                  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
          Capabilities: [50] MSI: Enable+ Count=8/8 Maskable+ 64bit-
                  Address: fee00618  Data: 0000
                  Masking: 00000000  Pending: 00000000
          Capabilities: [70] Express (v2) Endpoint, MSI 00
                  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s 
unlimited, L1 <64us
                          ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                          RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                          MaxPayload 128 bytes, MaxReadReq 512 bytes
                  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <4us, L1 <64us
                          ClockPM- Surprise- LLActRep- BwNot-
                  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                          ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                  DevCap2: Completion Timeout: Not Supported, TimeoutDis+, 
LTR-, OBFF Not Supported
                  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, 
OBFF Disabled
                  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- 
SpeedDis-
                           Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                           Compliance De-emphasis: -6dB
                  LnkSta2: Current De-emphasis Level: -6dB, 
EqualizationComplete-, EqualizationPhase1-
                           EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
          Capabilities: [100 v1] Advanced Error Reporting
                  UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                  UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                  CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
NonFatalErr-
                  CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- 
NonFatalErr+
                  AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- 
ChkEn-
          Capabilities: [140 v1] Virtual Channel
                  Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                  Arb:    Fixed- WRR32- WRR64- WRR128-
                  Ctrl:   ArbSelect=Fixed
                  Status: InProgress-
                  VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                          Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                          Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                          Status: NegoPending- InProgress-
          Capabilities: [160 v1] Device Serial Number 00-00-00-00-00-00-00-00
          Kernel driver in use: ath10k_pci

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1471583/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]