[Qemu-devel] [PATCH v2 10/16] libqos/ahci: add NCQ frame support

[John Snow]

NCQ frames are generated a little differently than
their non-NCQ cousins. Add support for them.

Signed-off-by: John Snow <address@hidden>
---
 tests/libqos/ahci.c | 44 +++++++++++++++++++++++++++++++++++---------
 tests/libqos/ahci.h | 29 ++++++++++++++++++++++++++++-
 2 files changed, 63 insertions(+), 10 deletions(-)

diff --git a/tests/libqos/ahci.c b/tests/libqos/ahci.c
index 922af8b..9a4d510 100644
--- a/tests/libqos/ahci.c
+++ b/tests/libqos/ahci.c
@@ -695,19 +695,34 @@ static void command_header_init(AHCICommand *cmd)
 static void command_table_init(AHCICommand *cmd)
 {
     RegH2DFIS *fis = &(cmd->fis);
+    uint16_t sect_count = (cmd->xbytes / AHCI_SECTOR_SIZE);
 
     fis->fis_type = REG_H2D_FIS;
     fis->flags = REG_H2D_FIS_CMD; /* "Command" bit */
     fis->command = cmd->name;
-    cmd->fis.feature_low = 0x00;
-    cmd->fis.feature_high = 0x00;
-    if (cmd->props->lba28 || cmd->props->lba48) {
-        cmd->fis.device = ATA_DEVICE_LBA;
+
+    if (cmd->props->ncq) {
+        NCQFIS *ncqfis = (NCQFIS *)fis;
+        /* NCQ is weird and re-uses FIS frames for unrelated data.
+         * See SATA 3.2, 13.6.4.1 READ FPDMA QUEUED for an example. */
+        ncqfis->sector_low = sect_count & 0xFF;
+        ncqfis->sector_hi = (sect_count >> 8) & 0xFF;
+        ncqfis->device = NCQ_DEVICE_MAGIC;
+        /* Force Unit Access is bit 7 in the device register */
+        ncqfis->tag = 0;  /* bits 3-7 are the NCQ tag */
+        ncqfis->prio = 0; /* bits 6,7 are a prio tag */
+        /* RARC bit is bit 0 of TAG field */
+    } else {
+        fis->feature_low = 0x00;
+        fis->feature_high = 0x00;
+        if (cmd->props->lba28 || cmd->props->lba48) {
+            fis->device = ATA_DEVICE_LBA;
+        }
+        fis->count = (cmd->xbytes / AHCI_SECTOR_SIZE);
     }
-    cmd->fis.count = (cmd->xbytes / AHCI_SECTOR_SIZE);
-    cmd->fis.icc = 0x00;
-    cmd->fis.control = 0x00;
-    memset(cmd->fis.aux, 0x00, ARRAY_SIZE(cmd->fis.aux));
+    fis->icc = 0x00;
+    fis->control = 0x00;
+    memset(fis->aux, 0x00, ARRAY_SIZE(fis->aux));
 }
 
 AHCICommand *ahci_command_create(uint8_t command_name)
@@ -721,6 +736,7 @@ AHCICommand *ahci_command_create(uint8_t command_name)
     g_assert(!(props->lba28 && props->lba48));
     g_assert(!(props->read && props->write));
     g_assert(!props->size || props->data);
+    g_assert(!props->ncq || (props->ncq && props->lba48));
 
     /* Defaults and book-keeping */
     cmd->props = props;
@@ -789,6 +805,8 @@ void ahci_command_set_buffer(AHCICommand *cmd, uint64_t 
buffer)
 void ahci_command_set_sizes(AHCICommand *cmd, uint64_t xbytes,
                             unsigned prd_size)
 {
+    uint16_t sect_count;
+
     /* Each PRD can describe up to 4MiB, and must not be odd. */
     g_assert_cmphex(prd_size, <=, 4096 * 1024);
     g_assert_cmphex(prd_size & 0x01, ==, 0x00);
@@ -796,7 +814,15 @@ void ahci_command_set_sizes(AHCICommand *cmd, uint64_t 
xbytes,
         cmd->prd_size = prd_size;
     }
     cmd->xbytes = xbytes;
-    cmd->fis.count = (cmd->xbytes / AHCI_SECTOR_SIZE);
+    sect_count = (cmd->xbytes / AHCI_SECTOR_SIZE);
+
+    if (cmd->props->ncq) {
+        NCQFIS *nfis = (NCQFIS *)&(cmd->fis);
+        nfis->sector_low = sect_count & 0xFF;
+        nfis->sector_hi = (sect_count >> 8) & 0xFF;
+    } else {
+        cmd->fis.count = sect_count;
+    }
     cmd->header.prdtl = size_to_prdtl(cmd->xbytes, cmd->prd_size);
 }
 
diff --git a/tests/libqos/ahci.h b/tests/libqos/ahci.h
index ca8abee..594a1c9 100644
--- a/tests/libqos/ahci.h
+++ b/tests/libqos/ahci.h
@@ -291,8 +291,9 @@ enum {
 #define CMDH_PMP      (0xF000)
 
 /* ATA device register masks */
-#define ATA_DEVICE_MAGIC 0xA0
+#define ATA_DEVICE_MAGIC 0xA0 /* used in ata1-3 */
 #define ATA_DEVICE_LBA   0x40
+#define NCQ_DEVICE_MAGIC 0x40 /* for ncq device registers */
 #define ATA_DEVICE_DRIVE 0x10
 #define ATA_DEVICE_HEAD  0x0F
 
@@ -397,6 +398,32 @@ typedef struct RegH2DFIS {
 } __attribute__((__packed__)) RegH2DFIS;
 
 /**
+ * Register host-to-device FIS structure, for NCQ commands.
+ * Actually just a RegH2DFIS, but with fields repurposed.
+ * Repurposed fields are annotated below.
+ */
+typedef struct NCQFIS {
+    /* DW0 */
+    uint8_t fis_type;
+    uint8_t flags;
+    uint8_t command;
+    uint8_t sector_low; /* H2D: Feature 7:0 */
+    /* DW1 */
+    uint8_t lba_lo[3];
+    uint8_t device;
+    /* DW2 */
+    uint8_t lba_hi[3];
+    uint8_t sector_hi; /* H2D: Feature 15:8 */
+    /* DW3 */
+    uint8_t tag;       /* H2D: Count 0:7 */
+    uint8_t prio;      /* H2D: Count 15:8 */
+    uint8_t icc;
+    uint8_t control;
+    /* DW4 */
+    uint8_t aux[4];
+} __attribute__((__packed__)) NCQFIS;
+
+/**
  * Command List entry structure.
  * The command list contains between 1-32 of these structures.
  */
-- 
2.1.0