qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v3 5/6] target-microblaze: Convert use-fpu to a


From: Edgar E. Iglesias
Subject: Re: [Qemu-devel] [PATCH v3 5/6] target-microblaze: Convert use-fpu to a CPU property
Date: Fri, 29 May 2015 16:51:49 +1000
User-agent: Mutt/1.5.21 (2010-09-15)

On Fri, May 29, 2015 at 04:31:58PM +1000, Alistair Francis wrote:
> Originally the use-fpu PVR bits were manually set for each machine. This
> is a hassle and difficult to read, instead set them based on the CPU
> properties.

The dt bindings for use-fpu are a bit non-intuivie unfortunately...
Anyway:

Reviewed-by: Edgar E. Iglesias <address@hidden>



> 
> Signed-off-by: Alistair Francis <address@hidden>
> Reviewed-by: Peter Crosthwaite <address@hidden>
> ---
> V3:
>  - Add comments explaing the FPU levels
> V2:
>  - Remove unnecessary declaration of r
> Changes since RFC:
>  - Tidy up the if logic
> 
>  hw/microblaze/petalogix_ml605_mmu.c |    7 +++++--
>  target-microblaze/cpu-qom.h         |    1 +
>  target-microblaze/cpu.c             |   13 ++++++++++---
>  target-microblaze/translate.c       |   10 +++-------
>  4 files changed, 19 insertions(+), 12 deletions(-)
> 
> diff --git a/hw/microblaze/petalogix_ml605_mmu.c 
> b/hw/microblaze/petalogix_ml605_mmu.c
> index 48c264b..05c120a 100644
> --- a/hw/microblaze/petalogix_ml605_mmu.c
> +++ b/hw/microblaze/petalogix_ml605_mmu.c
> @@ -71,9 +71,8 @@ static void machine_cpu_reset(MicroBlazeCPU *cpu)
>      env->pvr.regs[10] = 0x0e000000; /* virtex 6 */
>      /* setup pvr to match kernel setting */
>      env->pvr.regs[5] |= PVR5_DCACHE_WRITEBACK_MASK;
> -    env->pvr.regs[0] |= PVR0_USE_FPU_MASK | PVR0_ENDI;
> +    env->pvr.regs[0] |= PVR0_ENDI;
>      env->pvr.regs[0] = (env->pvr.regs[0] & ~PVR0_VERSION_MASK) | (0x14 << 8);
> -    env->pvr.regs[2] ^= PVR2_USE_FPU2_MASK;
>      env->pvr.regs[4] = 0xc56b8000;
>      env->pvr.regs[5] = 0xc56be000;
>  }
> @@ -95,6 +94,10 @@ petalogix_ml605_init(MachineState *machine)
>  
>      /* init CPUs */
>      cpu = MICROBLAZE_CPU(object_new(TYPE_MICROBLAZE_CPU));
> +    /* Use FPU but don't use floating point conversion and square
> +     * root instructions
> +     */
> +    object_property_set_int(OBJECT(cpu), 1, "use-fpu", &error_abort);
>      object_property_set_bool(OBJECT(cpu), true, "realized", &error_abort);
>  
>      /* Attach emulated BRAM through the LMB.  */
> diff --git a/target-microblaze/cpu-qom.h b/target-microblaze/cpu-qom.h
> index dd04199..a6474f9 100644
> --- a/target-microblaze/cpu-qom.h
> +++ b/target-microblaze/cpu-qom.h
> @@ -63,6 +63,7 @@ typedef struct MicroBlazeCPU {
>      struct {
>          bool stackprot;
>          uint32_t base_vectors;
> +        uint8_t usefpu;
>      } cfg;
>  
>      CPUMBState env;
> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> index 0f805d3..b857056 100644
> --- a/target-microblaze/cpu.c
> +++ b/target-microblaze/cpu.c
> @@ -110,12 +110,14 @@ static void mb_cpu_realizefn(DeviceState *dev, Error 
> **errp)
>                          | PVR2_USE_DIV_MASK \
>                          | PVR2_USE_HW_MUL_MASK \
>                          | PVR2_USE_MUL64_MASK \
> -                        | PVR2_USE_FPU_MASK \
> -                        | PVR2_USE_FPU2_MASK \
>                          | PVR2_FPU_EXC_MASK \
>                          | 0;
>  
> -    env->pvr.regs[0] |= cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0;
> +    env->pvr.regs[0] |= (cpu->cfg.stackprot ? PVR0_SPROT_MASK : 0) |
> +                        (cpu->cfg.usefpu ? PVR0_USE_FPU_MASK : 0);
> +
> +    env->pvr.regs[2] |= (cpu->cfg.usefpu ? PVR2_USE_FPU_MASK : 0) |
> +                        (cpu->cfg.usefpu > 1 ? PVR2_USE_FPU2_MASK : 0);
>  
>      env->pvr.regs[10] = 0x0c000000; /* Default to spartan 3a dsp family.  */
>      env->pvr.regs[11] = PVR11_USE_MMU | (16 << 17);
> @@ -161,6 +163,11 @@ static Property mb_properties[] = {
>      DEFINE_PROP_UINT32("base-vectors", MicroBlazeCPU, cfg.base_vectors, 0),
>      DEFINE_PROP_BOOL("use-stack-protection", MicroBlazeCPU, cfg.stackprot,
>                       true),
> +    /* If use-fpu > 0 - FPU is enabled
> +     * If use-fpu = 2 - Floating point conversion and square root 
> instructions
> +     *                  are enabled
> +     */
> +    DEFINE_PROP_UINT8("use-fpu", MicroBlazeCPU, cfg.usefpu, 2),
>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/target-microblaze/translate.c b/target-microblaze/translate.c
> index bd10b40..8187700 100644
> --- a/target-microblaze/translate.c
> +++ b/target-microblaze/translate.c
> @@ -1411,15 +1411,11 @@ static void dec_rts(DisasContext *dc)
>  
>  static int dec_check_fpuv2(DisasContext *dc)
>  {
> -    int r;
> -
> -    r = dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU2_MASK;
> -
> -    if (!r && (dc->tb_flags & MSR_EE_FLAG)) {
> +    if ((dc->cpu->cfg.usefpu != 2) && (dc->tb_flags & MSR_EE_FLAG)) {
>          tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_FPU);
>          t_gen_raise_exception(dc, EXCP_HW_EXCP);
>      }
> -    return r;
> +    return (dc->cpu->cfg.usefpu == 2) ? 0 : PVR2_USE_FPU2_MASK;
>  }
>  
>  static void dec_fpu(DisasContext *dc)
> @@ -1428,7 +1424,7 @@ static void dec_fpu(DisasContext *dc)
>  
>      if ((dc->tb_flags & MSR_EE_FLAG)
>            && (dc->cpu->env.pvr.regs[2] & PVR2_ILL_OPCODE_EXC_MASK)
> -          && !((dc->cpu->env.pvr.regs[2] & PVR2_USE_FPU_MASK))) {
> +          && (dc->cpu->cfg.usefpu != 1)) {
>          tcg_gen_movi_tl(cpu_SR[SR_ESR], ESR_EC_ILLEGAL_OP);
>          t_gen_raise_exception(dc, EXCP_HW_EXCP);
>          return;
> -- 
> 1.7.1
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]