[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2 2/5] target-microblaze: Preserve the pvr regi
From: |
Edgar E. Iglesias |
Subject: |
Re: [Qemu-devel] [PATCH v2 2/5] target-microblaze: Preserve the pvr registers during reset |
Date: |
Thu, 28 May 2015 16:42:20 +1000 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Thu, May 28, 2015 at 03:37:03PM +1000, Alistair Francis wrote:
> Move the Microblaze PVR registers to the end of the CPUMBState
> and preserve them during reset. This is similar to what the
> QEMU ARM model does with some of it's registers.
>
> This allows the Microblaze PVR registers to only be set once
> at realise instead of constantly at reset.
>
> Signed-off-by: Alistair Francis <address@hidden>
> Reviewed-by: Peter Crosthwaite <address@hidden>
Reviewed-by: Edgar E. Iglesias <address@hidden>
> ---
> V2:
> - Remove the memset and cpu_reset functions as they aren't
> required in the realize and I'm touching them anyway.
>
> NOTE: The individual machine resets still write to the PVR
> registers on each reset. This is no longer required as it only
> needs to be done once. Instead of moving them now, they are
> being left there and will be removed when they are all
> converted to the standard CPU properties.
>
> target-microblaze/cpu.c | 40 ++++++++++++++++++++++------------------
> target-microblaze/cpu.h | 10 ++++++----
> 2 files changed, 28 insertions(+), 22 deletions(-)
>
> diff --git a/target-microblaze/cpu.c b/target-microblaze/cpu.c
> index 67e3182..95be540 100644
> --- a/target-microblaze/cpu.c
> +++ b/target-microblaze/cpu.c
> @@ -63,13 +63,34 @@ static void mb_cpu_reset(CPUState *s)
>
> mcc->parent_reset(s);
>
> - memset(env, 0, sizeof(CPUMBState));
> + memset(env, 0, offsetof(CPUMBState, pvr));
> env->res_addr = RES_ADDR_NONE;
> tlb_flush(s, 1);
>
> /* Disable stack protector. */
> env->shr = ~0;
>
> +#if defined(CONFIG_USER_ONLY)
> + /* start in user mode with interrupts enabled. */
> + env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
> +#else
> + env->sregs[SR_MSR] = 0;
> + mmu_init(&env->mmu);
> + env->mmu.c_mmu = 3;
> + env->mmu.c_mmu_tlb_access = 3;
> + env->mmu.c_mmu_zones = 16;
> +#endif
> +}
> +
> +static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
> +{
> + CPUState *cs = CPU(dev);
> + MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(dev);
> + MicroBlazeCPU *cpu = MICROBLAZE_CPU(cs);
> + CPUMBState *env = &cpu->env;
> +
> + qemu_init_vcpu(cs);
> +
> env->pvr.regs[0] = PVR0_PVR_FULL_MASK \
> | PVR0_USE_BARREL_MASK \
> | PVR0_USE_DIV_MASK \
> @@ -99,25 +120,8 @@ static void mb_cpu_reset(CPUState *s)
> env->sregs[SR_PC] = cpu->base_vectors;
>
> #if defined(CONFIG_USER_ONLY)
> - /* start in user mode with interrupts enabled. */
> - env->sregs[SR_MSR] = MSR_EE | MSR_IE | MSR_VM | MSR_UM;
> env->pvr.regs[10] = 0x0c000000; /* Spartan 3a dsp. */
> -#else
> - env->sregs[SR_MSR] = 0;
> - mmu_init(&env->mmu);
> - env->mmu.c_mmu = 3;
> - env->mmu.c_mmu_tlb_access = 3;
> - env->mmu.c_mmu_zones = 16;
> #endif
> -}
> -
> -static void mb_cpu_realizefn(DeviceState *dev, Error **errp)
> -{
> - CPUState *cs = CPU(dev);
> - MicroBlazeCPUClass *mcc = MICROBLAZE_CPU_GET_CLASS(dev);
> -
> - cpu_reset(cs);
> - qemu_init_vcpu(cs);
>
> mcc->parent_realize(dev, errp);
> }
> diff --git a/target-microblaze/cpu.h b/target-microblaze/cpu.h
> index 4ea04ac..e4c1cde 100644
> --- a/target-microblaze/cpu.h
> +++ b/target-microblaze/cpu.h
> @@ -260,16 +260,18 @@ struct CPUMBState {
> #define IFLAGS_TB_MASK (D_FLAG | IMM_FLAG | DRTI_FLAG | DRTE_FLAG |
> DRTB_FLAG)
> uint32_t iflags;
>
> - struct {
> - uint32_t regs[16];
> - } pvr;
> -
> #if !defined(CONFIG_USER_ONLY)
> /* Unified MMU. */
> struct microblaze_mmu mmu;
> #endif
>
> CPU_COMMON
> +
> + /* These fields are preserved on reset. */
> +
> + struct {
> + uint32_t regs[16];
> + } pvr;
> };
>
> #include "cpu-qom.h"
> --
> 1.7.1
>
[Qemu-devel] [PATCH v2 4/5] target-microblaze: Tidy up the base-vectors property, Alistair Francis, 2015/05/28
[Qemu-devel] [PATCH v2 5/5] target-microblaze: Convert use-fpu to a CPU property, Alistair Francis, 2015/05/28