[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 22/28] acpi: add hardware implementation for memory h
From: |
Michael S. Tsirkin |
Subject: |
[Qemu-devel] [PULL 22/28] acpi: add hardware implementation for memory hot unplug |
Date: |
Mon, 11 May 2015 14:48:22 +0200 |
From: Zhu Guihua <address@hidden>
- implements QEMU hardware part of memory hot unplug protocol
described at "docs/spec/acpi_mem_hotplug.txt"
- handles memory remove notification event
- handles device eject notification
Reviewed-by: Igor Mammedov <address@hidden>
Signed-off-by: Zhu Guihua <address@hidden>
Reviewed-by: Michael S. Tsirkin <address@hidden>
Signed-off-by: Michael S. Tsirkin <address@hidden>
---
include/hw/acpi/pc-hotplug.h | 3 +++
include/hw/qdev-core.h | 1 +
hw/acpi/memory_hotplug.c | 21 ++++++++++++++++++++-
hw/core/qdev.c | 2 +-
hw/i386/acpi-build.c | 12 ++++++++++++
docs/specs/acpi_mem_hotplug.txt | 11 +++++++++--
hw/i386/acpi-dsdt-mem-hotplug.dsl | 13 ++++++++++++-
trace-events | 3 +++
8 files changed, 61 insertions(+), 5 deletions(-)
diff --git a/include/hw/acpi/pc-hotplug.h b/include/hw/acpi/pc-hotplug.h
index efa6ed7..0513c1c 100644
--- a/include/hw/acpi/pc-hotplug.h
+++ b/include/hw/acpi/pc-hotplug.h
@@ -43,6 +43,8 @@
#define MEMORY_SLOT_PROXIMITY MPX
#define MEMORY_SLOT_ENABLED MES
#define MEMORY_SLOT_INSERT_EVENT MINS
+#define MEMORY_SLOT_REMOVE_EVENT MRMV
+#define MEMORY_SLOT_EJECT MEJ
#define MEMORY_SLOT_SLECTOR MSEL
#define MEMORY_SLOT_OST_EVENT MOEV
#define MEMORY_SLOT_OST_STATUS MOSC
@@ -51,6 +53,7 @@
#define MEMORY_SLOT_CRS_METHOD MCRS
#define MEMORY_SLOT_OST_METHOD MOST
#define MEMORY_SLOT_PROXIMITY_METHOD MPXM
+#define MEMORY_SLOT_EJECT_METHOD MEJ0
#define MEMORY_SLOT_NOTIFY_METHOD MTFY
#define MEMORY_SLOT_SCAN_METHOD MSCN
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 4e673f9..5b7acf1 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -266,6 +266,7 @@ int qdev_init(DeviceState *dev) QEMU_WARN_UNUSED_RESULT;
void qdev_init_nofail(DeviceState *dev);
void qdev_set_legacy_instance_id(DeviceState *dev, int alias_id,
int required_for_version);
+HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev);
void qdev_unplug(DeviceState *dev, Error **errp);
void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp);
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 07e281f..35bbfeb 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -2,6 +2,7 @@
#include "hw/acpi/pc-hotplug.h"
#include "hw/mem/pc-dimm.h"
#include "hw/boards.h"
+#include "hw/qdev-core.h"
#include "trace.h"
#include "qapi-event.h"
@@ -91,6 +92,8 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr
addr, uint64_t data,
MemHotplugState *mem_st = opaque;
MemStatus *mdev;
ACPIOSTInfo *info;
+ DeviceState *dev = NULL;
+ HotplugHandler *hotplug_ctrl = NULL;
if (!mem_st->dev_count) {
return;
@@ -128,13 +131,29 @@ static void acpi_memory_hotplug_write(void *opaque,
hwaddr addr, uint64_t data,
qapi_event_send_acpi_device_ost(info, &error_abort);
qapi_free_ACPIOSTInfo(info);
break;
- case 0x14:
+ case 0x14: /* set is_* fields */
mdev = &mem_st->devs[mem_st->selector];
if (data & 2) { /* clear insert event */
mdev->is_inserting = false;
trace_mhp_acpi_clear_insert_evt(mem_st->selector);
+ } else if (data & 4) {
+ mdev->is_removing = false;
+ trace_mhp_acpi_clear_remove_evt(mem_st->selector);
+ } else if (data & 8) {
+ if (!mdev->is_enabled) {
+ trace_mhp_acpi_ejecting_invalid_slot(mem_st->selector);
+ break;
+ }
+
+ dev = DEVICE(mdev->dimm);
+ hotplug_ctrl = qdev_get_hotplug_handler(dev);
+ /* call pc-dimm unplug cb */
+ hotplug_handler_unplug(hotplug_ctrl, dev, NULL);
+ trace_mhp_acpi_pc_dimm_deleted(mem_st->selector);
}
break;
+ default:
+ break;
}
}
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index 6e6a65d..b0f0f84 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -273,7 +273,7 @@ void qdev_set_legacy_instance_id(DeviceState *dev, int
alias_id,
dev->alias_required_for_version = required_for_version;
}
-static HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
+HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
{
HotplugHandler *hotplug_ctrl = NULL;
diff --git a/hw/i386/acpi-build.c b/hw/i386/acpi-build.c
index 4202d76..967448a 100644
--- a/hw/i386/acpi-build.c
+++ b/hw/i386/acpi-build.c
@@ -879,6 +879,12 @@ build_ssdt(GArray *table_data, GArray *linker,
aml_append(field,
/*(read) 1 if has a insert event. (write) 1 to clear event */
aml_named_field(stringify(MEMORY_SLOT_INSERT_EVENT), 1));
+ aml_append(field,
+ /* (read) 1 if has a remove event. (write) 1 to clear event */
+ aml_named_field(stringify(MEMORY_SLOT_REMOVE_EVENT), 1));
+ aml_append(field,
+ /* initiates device eject, write only */
+ aml_named_field(stringify(MEMORY_SLOT_EJECT), 1));
aml_append(scope, field);
field = aml_field(stringify(MEMORY_HOTPLUG_IO_REGION), aml_dword_acc,
@@ -923,6 +929,12 @@ build_ssdt(GArray *table_data, GArray *linker,
)));
aml_append(dev, method);
+ method = aml_method("_EJ0", 1);
+ s = BASEPATH stringify(MEMORY_SLOT_EJECT_METHOD);
+ aml_append(method, aml_return(aml_call2(
+ s, aml_name("_UID"), aml_arg(0))));
+ aml_append(dev, method);
+
aml_append(sb_scope, dev);
}
diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt
index 68daa14..3df3620 100644
--- a/docs/specs/acpi_mem_hotplug.txt
+++ b/docs/specs/acpi_mem_hotplug.txt
@@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte
access):
1: Device insert event, used to distinguish device for which
no device check event to OSPM was issued.
It's valid only when bit 1 is set.
- 2-7: reserved and should be ignored by OSPM
+ 2: Device remove event, used to distinguish device for which
+ no device eject request to OSPM was issued.
+ 3-7: reserved and should be ignored by OSPM
[0x15-0x17] reserved
write access:
@@ -38,7 +40,12 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte
access):
1: if set to 1 clears device insert event, set by OSPM
after it has emitted device check event for the
selected memory device
- 2-7: reserved, OSPM must clear them before writing to register
+ 2: if set to 1 clears device remove event, set by OSPM
+ after it has emitted device eject request for the
+ selected memory device
+ 3: if set to 1 initiates device eject, set by OSPM when it
+ triggers memory device removal and calls _EJ0 method
+ 4-7: reserved, OSPM must clear them before writing to register
Selecting memory device slot beyond present range has no effect on platform:
- write accesses to memory hot-plug registers not documented above are
diff --git a/hw/i386/acpi-dsdt-mem-hotplug.dsl
b/hw/i386/acpi-dsdt-mem-hotplug.dsl
index 1e9ec39..c2bb6a1 100644
--- a/hw/i386/acpi-dsdt-mem-hotplug.dsl
+++ b/hw/i386/acpi-dsdt-mem-hotplug.dsl
@@ -29,6 +29,8 @@
External(MEMORY_SLOT_PROXIMITY, FieldUnitObj) // read only
External(MEMORY_SLOT_ENABLED, FieldUnitObj) // 1 if enabled, read
only
External(MEMORY_SLOT_INSERT_EVENT, FieldUnitObj) // (read) 1 if
has a insert event. (write) 1 to clear event
+ External(MEMORY_SLOT_REMOVE_EVENT, FieldUnitObj) // (read) 1 if
has a remove event. (write) 1 to clear event
+ External(MEMORY_SLOT_EJECT, FieldUnitObj) // initiates device
eject, write only
External(MEMORY_SLOT_SLECTOR, FieldUnitObj) // DIMM selector,
write only
External(MEMORY_SLOT_OST_EVENT, FieldUnitObj) // _OST event code,
write only
External(MEMORY_SLOT_OST_STATUS, FieldUnitObj) // _OST status
code, write only
@@ -55,8 +57,10 @@
If (LEqual(MEMORY_SLOT_INSERT_EVENT, One)) { // Memory
device needs check
MEMORY_SLOT_NOTIFY_METHOD(Local0, 1)
Store(1, MEMORY_SLOT_INSERT_EVENT)
+ } Elseif (LEqual(MEMORY_SLOT_REMOVE_EVENT, One)) { //
Ejection request
+ MEMORY_SLOT_NOTIFY_METHOD(Local0, 3)
+ Store(1, MEMORY_SLOT_REMOVE_EVENT)
}
- // TODO: handle memory eject request
Add(Local0, One, Local0) // goto next DIMM
}
Release(MEMORY_SLOT_LOCK)
@@ -156,5 +160,12 @@
Store(Arg2, MEMORY_SLOT_OST_STATUS)
Release(MEMORY_SLOT_LOCK)
}
+
+ Method(MEMORY_SLOT_EJECT_METHOD, 2) {
+ Acquire(MEMORY_SLOT_LOCK, 0xFFFF)
+ Store(ToInteger(Arg0), MEMORY_SLOT_SLECTOR) // select DIMM
+ Store(1, MEMORY_SLOT_EJECT)
+ Release(MEMORY_SLOT_LOCK)
+ }
} // Device()
} // Scope()
diff --git a/trace-events b/trace-events
index 30eba92..46f6ef0 100644
--- a/trace-events
+++ b/trace-events
@@ -1562,6 +1562,7 @@ vfio_put_base_device(int fd) "close vdev->fd=%d"
#hw/acpi/memory_hotplug.c
mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
+mhp_acpi_ejecting_invalid_slot(uint32_t slot) "0x%"PRIx32
mhp_acpi_read_addr_lo(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr
lo: 0x%"PRIx32
mhp_acpi_read_addr_hi(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr
hi: 0x%"PRIx32
mhp_acpi_read_size_lo(uint32_t slot, uint32_t size) "slot[0x%"PRIx32"] size
lo: 0x%"PRIx32
@@ -1572,6 +1573,8 @@ mhp_acpi_write_slot(uint32_t slot) "set active slot:
0x%"PRIx32
mhp_acpi_write_ost_ev(uint32_t slot, uint32_t ev) "slot[0x%"PRIx32"] OST
EVENT: 0x%"PRIx32
mhp_acpi_write_ost_status(uint32_t slot, uint32_t st) "slot[0x%"PRIx32"] OST
STATUS: 0x%"PRIx32
mhp_acpi_clear_insert_evt(uint32_t slot) "slot[0x%"PRIx32"] clear insert event"
+mhp_acpi_clear_remove_evt(uint32_t slot) "slot[0x%"PRIx32"] clear remove event"
+mhp_acpi_pc_dimm_deleted(uint32_t slot) "slot[0x%"PRIx32"] pc-dimm deleted"
# hw/i386/pc.c
mhp_pc_dimm_assigned_slot(int slot) "0x%d"
--
MST
- [Qemu-devel] [PULL 14/28] pci: remove hard-coded bar size in msix_init_exclusive_bar(), (continued)
- [Qemu-devel] [PULL 14/28] pci: remove hard-coded bar size in msix_init_exclusive_bar(), Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 16/28] docs: update documentation for memory hot unplug, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 17/28] acpi, mem-hotplug: add acpi_memory_slot_status() to get MemStatus, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 15/28] virtio: coding style tweak, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 18/28] acpi, mem-hotplug: add unplug request cb for memory device, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 19/28] acpi, mem-hotplug: add unplug cb for memory device, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 21/28] acpi: fix "Memory device control fields" register, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 20/28] acpi: extend aml_field() to support UpdateRule, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 24/28] acpi: add a missing backslash to the \_SB scope., Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 25/28] pci: Merge pci_nic_init() into pci_nic_init_nofail(), Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 22/28] acpi: add hardware implementation for memory hot unplug,
Michael S. Tsirkin <=
- [Qemu-devel] [PULL 28/28] acpi: update expected files for memory unplug, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 23/28] qmp-event: add event notification for memory hot unplug error, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 26/28] virtio-net: Move DEFINE_VIRTIO_NET_FEATURES to virtio-net, Michael S. Tsirkin, 2015/05/11
- [Qemu-devel] [PULL 27/28] virtio-scsi: Move DEFINE_VIRTIO_SCSI_FEATURES to virtio-scsi, Michael S. Tsirkin, 2015/05/11
- Re: [Qemu-devel] [PULL 00/28] pc, virtio enhancements, Peter Maydell, 2015/05/12