[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 4/4] qemu-ga: Building Windows MSI installation
From: |
Yossi Hindin |
Subject: |
Re: [Qemu-devel] [PATCH 4/4] qemu-ga: Building Windows MSI installation with configure/Makefile |
Date: |
Wed, 6 May 2015 07:53:55 -0400 (EDT) |
I am submitting second version of patches.
----- Original Message -----
> From: "Paolo Bonzini" <address@hidden>
> To: "Yossi Hindin" <address@hidden>, address@hidden
> Cc: address@hidden, address@hidden, address@hidden
> Sent: Monday, May 4, 2015 12:03:02 PM
> Subject: Re: [PATCH 4/4] qemu-ga: Building Windows MSI installation with
> configure/Makefile
>
>
>
> On 26/04/2015 09:04, Yossi Hindin wrote:
> > +ifdef QEMU_GA_MSI_WITH_VSS
> > +${QEMU_GA_MSI}: qga/vss-win32/qga-vss.dll qemu-ga.exe
>
> Shouldn't the qemu-ga.exe dependency be unconditional?
Yes, it should. Fixed in the new patches.
>
> > +endif
> > +
> > +${QEMU_GA_MSI}: config-host.mak
> > +
> > +${QEMU_GA_MSI}: qga/installer/qemu-ga.wxs
> > + $(call quiet-command,QEMU_GA_VERSION="$(QEMU_GA_VERSION)"
> > QEMU_GA_MANUFACTURER="$(QEMU_GA_MANUFACTURER)"
> > QEMU_GA_DISTRO="$(QEMU_GA_DISTRO)" \
> > + wixl -o $@ ${QEMU_GA_MSI_ARCH} ${QEMU_GA_MSI_WITH_VSS}
> > ${QEMU_GA_MSI_MINGW_DLL_PATH} $<, " WIXL $@")
>
> Please use $(...) instead of ${...} for consistency.
Fixed. BTW. there are other places in the 'configure' script where ${} is
used.
>
> > +
> > clean:
> > # avoid old build problems by removing potentially incorrect old files
> > rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h
> > gen-op-arm.h
> > rm -f qemu-options.def
> > + rm -f *.msi
> > find . \( -name '*.l[oa]' -o -name '*.so' -o -name '*.dll' -o -name
> > '*.mo' -o -name '*.[oda]' \) -type f -exec rm {} +
> > rm -f $(filter-out %.tlb,$(TOOLS)) $(HELPERS-y) qemu-ga TAGS cscope.*
> > *.pod *~ */*~
> > rm -f fsdev/*.pod
> > diff --git a/configure b/configure
> > index 6969f6f..0aa79bb 100755
> > --- a/configure
> > +++ b/configure
> > @@ -316,6 +316,7 @@ snappy=""
> > bzip2=""
> > guest_agent=""
> > guest_agent_with_vss="no"
> > +guest_msi=""
> > vss_win32_sdk=""
> > win_sdk="no"
> > want_tools="yes"
> > @@ -1069,6 +1070,10 @@ for opt do
> > ;;
> > --disable-guest-agent) guest_agent="no"
> > ;;
> > + --enable-guest-msi) guest_msi="yes"
> > + ;;
> > + --disable-guest-msi) guest_msi="no"
> > + ;;
> > --with-vss-sdk) vss_win32_sdk=""
> > ;;
> > --with-vss-sdk=*) vss_win32_sdk="$optarg"
> > @@ -1407,6 +1412,8 @@ Advanced options (experts only):
> > --enable-quorum enable quorum block filter support
> > --disable-numa disable libnuma support
> > --enable-numa enable libnuma support
> > + --enable-guest-msi enable building guest agent Windows MSI
> > installation package
> > + --disable-guest-msi disable building guest agent Windows MSI
> > installation package
>
> --enable-guest-agent-msi?
Renamed
>
> Also, please keep the guest agent options together.
Done.
>
> >
> > NOTE: The object files are built at the place where configure is launched
> > EOF
> > @@ -3832,6 +3839,54 @@ if test "$mingw32" = "yes" -a "$guest_agent" != "no"
> > -a "$guest_agent_with_vss"
> > fi
> >
> > ##########################################
> > +# Guest agent Window MSI package
> > +
> > +if test "$guest_msi" = "yes"; then
>
> Since building the MSI is on-demand anyway ("make msi"), we might as well
> treat it similar to other configure options:
>
> - --enable-foo causes an error if the feature is not available
> - --disable-foo forcibly disable the feature
> - the default is to configure the feature if available, otherwise disable it
>
> This would be something like this:
>
> if test "$guest_agent" != yes; then
> if test "$guest_msi" = yes; then
> error_exit "MSI guest agent package requires guest agent enabled"
> fi
> guest_msi=no
> elif test "$mingw32" != "yes"; then
> if test "$guest_msi" = "yes"; then
> error_exit "MSI guest agent package is available only for MinGW Windows
> cross-compilation"
> fi
> guest_msi=no
> elif test ! has_wixl; then
> if test "$guest_msi" = "yes"; then
> error_exit "wixl not found, required for building MSI guest agent
> package"
> fi
> guest_msi=no
> fi
>
> if test "$guest_msi" != no; then
> ...
> fi
The logic changed according to your comment. Also, Makefile doesn't try to
build MSI if MSI was not enabled by
configure script.
>
> > +
> > +
> > + if test "$guest_agent_with_vss" = "yes"; then
> > + QEMU_GA_MSI_WITH_VSS="-D InstallVss"
> > + fi
> > +
> > + if test "$QEMU_GA_MANUFACTURER" = ""; then
> > + QEMU_GA_MANUFACTURER=QEMU
> > + fi
> > +
> > + if test "$QEMU_GA_DISTRO" = ""; then
> > + QEMU_GA_DISTRO=Linux
> > + fi
> > +
> > + if test "$QEMU_GA_VERSION" = ""; then
> > + QEMU_GA_VERSION=`cat $source_path/VERSION`
> > + fi
> > +
> > + case "$cpu" in
> > + x86_64)
> > + QEMU_GA_MSI_ARCH="-a x64 -D Arch=64"
> > + ;;
> > + i386)
> > + QEMU_GA_MSI_ARCH="-D Arch=32"
> > + ;;
> > + *)
> > + error_exit "CPU $cpu not supported for building installation package"
> > + ;;
> > + esac
> > +
> > +fi
> > +
> > +##########################################
> >
> > ##########################################
> > # check if we have fdatasync
> > @@ -4500,6 +4555,14 @@ if test "$mingw32" = "yes" ; then
> > echo "CONFIG_QGA_VSS=y" >> $config_host_mak
> > echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
> > fi
> > + if test "$guest_msi" = "yes"; then
>
> Similarly, "!= no" here.
Done.
>
> > + echo "QEMU_GA_MSI_MINGW_DLL_PATH=-D Mingw_dlls=`$pkg_config
> > --variable=prefix glib-2.0`/bin" >> $config_host_mak
>
> Why not set up the variable above?
Assignment of QEMU_GA_MSI_MINGW_DLL_PATH grouped wihh other QEMU GA-related
variables.
>
> Paolo
>
> > + echo "QEMU_GA_MSI_WITH_VSS=${QEMU_GA_MSI_WITH_VSS}" >>
> > $config_host_mak
> > + echo "QEMU_GA_MSI_ARCH=${QEMU_GA_MSI_ARCH}" >> $config_host_mak
> > + echo "QEMU_GA_MANUFACTURER=${QEMU_GA_MANUFACTURER}" >>
> > $config_host_mak
> > + echo "QEMU_GA_DISTRO=${QEMU_GA_DISTRO}" >> $config_host_mak
> > + echo "QEMU_GA_VERSION=${QEMU_GA_VERSION}" >> $config_host_mak
> > + fi
> > else
> > echo "CONFIG_POSIX=y" >> $config_host_mak
> > fi
> >
>