Re: [Qemu-devel] [PATCH v5 19/20] hw/arm/virt-acpi-build: Add PCIe controller in ACPI DSDT table

[Igor Mammedov]

On Tue, 28 Apr 2015 17:06:00 +0800
Shannon Zhao <address@hidden> wrote:

> On 2015/4/28 16:47, Michael S. Tsirkin wrote:
> > On Tue, Apr 28, 2015 at 10:42:25AM +0200, Igor Mammedov wrote:
> >> On Wed, 15 Apr 2015 21:25:08 +0800
> >> Shannon Zhao <address@hidden> wrote:
> >>
> >>> From: Shannon Zhao <address@hidden>
> >>>
> >>> Add PCIe controller in ACPI DSDT table, so the guest can detect
> >>> the PCIe.
> >>>
> >>> Signed-off-by: Shannon Zhao <address@hidden>
> >>> Signed-off-by: Shannon Zhao <address@hidden>
> >>> ---
> >>>  hw/arm/virt-acpi-build.c | 152 
> >>> +++++++++++++++++++++++++++++++++++++++++++++++
> >>>  1 file changed, 152 insertions(+)
> >>>
> >>> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> >>> index 85e8242..ceec405 100644
> >>> --- a/hw/arm/virt-acpi-build.c
> >>> +++ b/hw/arm/virt-acpi-build.c
> >>> @@ -49,6 +49,8 @@
> >>>  #include "qapi/qmp/qint.h"
> >>>  #include "qom/qom-qobject.h"
> >>>  #include "exec/ram_addr.h"
> >>> +#include "hw/pci/pcie_host.h"
> >>> +#include "hw/pci/pci.h"
> >>>  
> >>>  typedef struct VirtAcpiCpuInfo {
> >>>      DECLARE_BITMAP(found_cpus, VIRT_ACPI_CPU_ID_LIMIT);
> >>> @@ -160,6 +162,154 @@ static void acpi_dsdt_add_virtio(Aml *scope, const 
> >>> MemMap *virtio_mmio_memmap,
> >>>      }
> >>>  }
> >>>  
> >>> +static void acpi_dsdt_add_pci(Aml *scope, AcpiPcieInfo *info)
> >>> +{
> >>> +    Aml *method, *crs, *ifctx, *UUID, *ifctx1, *elsectx, *buf;
> >>> +    int i, bus_no;
> >>> +    int irq = *info->pcie_irq + 32;
> >>> +
> >>> +    Aml *dev = aml_device("%s", "PCI0");
> >>> +    aml_append(dev, aml_name_decl("_HID", aml_string("PNP0A08")));
> >>> +    aml_append(dev, aml_name_decl("_CID", aml_string("PNP0A03")));
> >>> +    aml_append(dev, aml_name_decl("_SEG", aml_int(0)));
> >>> +    aml_append(dev, aml_name_decl("_BBN", aml_int(0)));
> >>> +    aml_append(dev, aml_name_decl("_ADR", aml_int(0)));
> >>> +    aml_append(dev, aml_name_decl("_UID", aml_string("PCI0")));
> >>> +    aml_append(dev, aml_name_decl("_STR", aml_string("PCIe 0 Device")));
> >>> +
> >>> +    /* Declare the PCI Routing Table. */
> >>> +    Aml *rt_pkg = aml_package(info->nr_pcie_buses * PCI_NUM_PINS);
> >>> +    for (bus_no = 0; bus_no < info->nr_pcie_buses; bus_no++) {
> >>> +        for (i = 0; i < PCI_NUM_PINS; i++) {
> >>> +            int gsi = (i + bus_no) % PCI_NUM_PINS;
> >>> +            Aml *pkg = aml_package(4);
> >>> +            aml_append(pkg, aml_int((bus_no << 16) | 0xFFFF));
> >>> +            aml_append(pkg, aml_int(i));
> >>> +            aml_append(pkg, aml_name("GSI%d", gsi));
> >>> +            aml_append(pkg, aml_int(0));
> >>> +            aml_append(rt_pkg, pkg);
> >>> +        }
> >>> +    }
> >>> +    aml_append(dev, aml_name_decl("_PRT", rt_pkg));
> >>> +
> >>> +    /* Create GSI link device */
> >>> +    for (i = 0; i < PCI_NUM_PINS; i++) {
> >>> +        Aml *dev_gsi = aml_device("GSI%d", i);
> >>> +        aml_append(dev_gsi, aml_name_decl("_HID", 
> >>> aml_string("PNP0C0F")));
> >>> +        aml_append(dev_gsi, aml_name_decl("_UID", aml_int(0)));
> >>> +        crs = aml_resource_template();
> >>> +        aml_append(crs,
> >>> +                   aml_interrupt(aml_consumer, aml_level, 
> >>> aml_active_high,
> >>> +                   aml_exclusive, aml_not_wake_capable, irq + i));
> >>> +        aml_append(dev_gsi, aml_name_decl("_PRS", crs));
> >>> +        crs = aml_resource_template();
> >>> +        aml_append(crs,
> >>> +                   aml_interrupt(aml_consumer, aml_level, 
> >>> aml_active_high,
> >>> +                   aml_exclusive, aml_not_wake_capable, irq + i));
> >>> +        aml_append(dev_gsi, aml_name_decl("_CRS", crs));
> >>> +        method = aml_method("_SRS", 1);
> >>> +        aml_append(dev_gsi, method);
> >>> +        aml_append(dev, dev_gsi);
> >>> +    }
> >>> +
> >>> +    method = aml_method("_CBA", 0);
> >>> +    aml_append(method, aml_return(aml_int(info->pcie_ecam.addr)));
> >>> +    aml_append(dev, method);
> >>> +
> >>> +    method = aml_method("_CRS", 0);
> >>> +    Aml *rbuf = aml_resource_template();
> >>> +    aml_append(rbuf,
> >>> +        aml_word_bus_number(aml_min_fixed, aml_max_fixed, aml_pos_decode,
> >>> +                            0x0000, 0x0000, info->nr_pcie_buses - 1,
> >>> +                            0x0000, info->nr_pcie_buses));
> >>> +    aml_append(rbuf,
> >>> +        aml_dword_memory(aml_pos_decode, aml_min_fixed, aml_max_fixed,
> >>> +                         aml_non_cacheable, aml_ReadWrite,
> >>> +                         0x0000, info->pcie_mmio.addr,
> >>> +                         info->pcie_mmio.addr + info->pcie_mmio.size - 1,
> >>> +                         0x0000, info->pcie_mmio.size));
> >>> +    aml_append(rbuf,
> >>> +        aml_dword_io(aml_min_fixed, aml_max_fixed,
> >>> +                     aml_pos_decode, aml_entire_range,
> >>> +                     0x0000, 0x0000, info->pcie_ioport.size - 1,
> >>> +                     info->pcie_ioport.addr, info->pcie_ioport.size));
> >>> +
> >>> +    aml_append(method, aml_name_decl("RBUF", rbuf));
> >>> +    aml_append(method, aml_return(rbuf));
> >>> +    aml_append(dev, method);
> >>> +
> >>> +    /* Declare an _OSC (OS Control Handoff) method */
> >>> +    aml_append(dev, aml_name_decl("SUPP", aml_int(0)));
> >>> +    aml_append(dev, aml_name_decl("CTRL", aml_int(0)));
> >>> +    method = aml_method("_OSC", 4);
> >>> +    aml_append(method,
> >>> +        aml_create_dword_field(aml_arg(3), aml_int(0), "CDW1"));
> >>> +
> >>> +    /* PCI Firmware Specification 3.0
> >>> +     * 4.5.1. _OSC Interface for PCI Host Bridge Devices
> >>> +     * The _OSC interface for a PCI/PCI-X/PCI Express hierarchy is
> >>> +     * identified by the Universal Unique IDentifier (UUID)
> >>> +     * 33db4d5b-1ff7-401c-9657-7441c03dd766
> >>> +     */
> >>> +    UUID = aml_touuid("33DB4D5B-1FF7-401C-9657-7441C03DD766");
> >>> +    ifctx = aml_if(aml_equal(aml_arg(0), UUID));
> >>> +    aml_append(ifctx,
> >>> +        aml_create_dword_field(aml_arg(3), aml_int(4), "CDW2"));
> >>> +    aml_append(ifctx,
> >>> +        aml_create_dword_field(aml_arg(3), aml_int(8), "CDW3"));
> >>> +    aml_append(ifctx, aml_store(aml_name("CDW2"), aml_name("SUPP")));
> >>> +    aml_append(ifctx, aml_store(aml_name("CDW3"), aml_name("CTRL")));
> >>> +    aml_append(ifctx, aml_store(aml_and(aml_name("CTRL"), aml_int(0x1D)),
> >>> +                                aml_name("CTRL")));
> >>> +
> >>> +    ifctx1 = aml_if(aml_not(aml_equal(aml_arg(1), aml_int(0x1))));
> >>> +    aml_append(ifctx1, aml_store(aml_or(aml_name("CDW1"), aml_int(0x08)),
> >>> +                                 aml_name("CDW1")));
> >>> +    aml_append(ifctx, ifctx1);
> >>> +
> >>> +    ifctx1 = aml_if(aml_not(aml_equal(aml_name("CDW3"), 
> >>> aml_name("CTRL"))));
> >>> +    aml_append(ifctx1, aml_store(aml_or(aml_name("CDW1"), aml_int(0x10)),
> >>> +                                 aml_name("CDW1")));
> >>> +    aml_append(ifctx, ifctx1);
> >>> +
> >>> +    aml_append(ifctx, aml_store(aml_name("CTRL"), aml_name("CDW3")));
> >>> +    aml_append(ifctx, aml_return(aml_arg(3)));
> >>> +    aml_append(method, ifctx);
> >>> +
> >>> +    elsectx = aml_else();
> >>> +    aml_append(elsectx, aml_store(aml_or(aml_name("CDW1"), aml_int(4)),
> >>> +                                  aml_name("CDW1")));
> >>> +    aml_append(elsectx, aml_return(aml_arg(3)));
> >>> +    aml_append(method, elsectx);
> >>> +    aml_append(dev, method);
> >>> +
> >>> +    method = aml_method("_DSM", 4);
> >>> +
> >>> +    /* PCI Firmware Specification 3.0
> >>> +     * 4.6.1. _DSM for PCI Express Slot Information
> >>> +     * The UUID in _DSM in this context is
> >>> +     * {E5C937D0-3553-4d7a-9117-EA4D19C3434D}
> >>> +     */
> >>> +    UUID = aml_touuid("E5C937D0-3553-4d7a-9117-EA4D19C3434D");
> >>> +    ifctx = aml_if(aml_equal(aml_arg(0), UUID));
> >>> +    ifctx1 = aml_if(aml_equal(aml_arg(2), aml_int(0)));
> >>> +    buf = aml_buffer();
> >>> +    build_append_int_noprefix(buf->buf, 0x01, 1);
> >> pls, do not modify internal buffer of Aml objects outside API,
> >> and do not export build_append_int_noprefix().
> >>
> >> Looking at spec _DSM returns bitfield buffer.
> >> for purposes you are using here i.e. set bit 1 to 1 or 0
> >> it's sufficient to use aml_int(1) or aml_int(0) as they are
> >> folded in OneOp /0x1/ and ZeroOp /0x0/ opcodes.
> >>
> >> However if you need to manipulate specific bitfields checkout 
> >> CreateBitField /ACPI5.0: 19.5.18 CreateBitField (Create 1-Bit Buffer 
> >> Field)/
> >> Probably that's what you are looking for.
> >>
> >> Also aml_buffer() needs to be modified to handle BufferSize
> >> see /ACPI5.0: 19.5.10 Buffer (Declare Buffer Object)/
> >> so that space for bitfields could be reserved
> >> /* as workaround/hack one can add several aml_int(0) into it to
> >> reserve needed amount of bytes */
> > 
> > I dislike abusing aml_int like this, makes code hard to follow.
> > Best just do it properly.
> > Internally you can call append_byte.
> > 
> 
> I agree we could use append_byte to reserve BufferSize of bytes.
> But we still need a function to initialize the buffer. A new function
> wraps build_append_int_noprefix()?
just extend aml_buffer(BufferSize) and then use any appropriate
internal functions inside API.

Outside you'll call:

buf = aml_buffer(1);
aml_append(method, aml_name_decl("RET", buf);
aml_createbitfield("RET", 0, "FNEN"/* non 0 functions supported */);
...
ifctx1 = aml_if(aml_equal(aml_arg(2), aml_int(0)));
aml_append(ifctx1, aml_store(aml_name("FNEN", aml_int(1)));
...
/* create bit field for every supported function if supported */
...
aml_append(method, aml_return(aml_name("RET")));


> 
> >>
> >>> +    aml_append(ifctx1, aml_return(buf));
> >>> +    aml_append(ifctx, ifctx1);
> >>> +    aml_append(method, ifctx);
> >>> +
> >>> +    buf = aml_buffer();
> >>> +    build_append_int_noprefix(buf->buf, 0x00, 1);
> >>> +    aml_append(method, aml_return(buf));
> >>> +    aml_append(dev, method);
> >>> +
> >>> +    Aml *dev_rp0 = aml_device("%s", "RP0");
> >>> +    aml_append(dev_rp0, aml_name_decl("_ADR", aml_int(0)));
> >>> +    aml_append(dev, dev_rp0);
> >>> +    aml_append(scope, dev);
> >>> +}
> >>> +
> >>>  /* RSDP */
> >>>  static GArray *
> >>>  build_rsdp(GArray *rsdp_table, GArray *linker, unsigned rsdt)
> >>> @@ -318,6 +468,8 @@ build_dsdt(GArray *table_data, GArray *linker, 
> >>> VirtGuestInfo *guest_info)
> >>>      acpi_dsdt_add_flash(scope, info->flash_memmap);
> >>>      acpi_dsdt_add_virtio(scope, info->virtio_mmio_memmap,
> >>>               info->virtio_mmio_irq, info->virtio_mmio_num);
> >>> +    acpi_dsdt_add_pci(scope, guest_info->pcie_info);
> >>> +
> >>>      aml_append(dsdt, scope);
> >>>  
> >>>      /* copy AML table into ACPI tables blob and patch header there */
> > 
> > .
> > 
> 
>