Re: [Qemu-devel] [PATCH 2/9] virtio-gpu/2d: add virtio gpu core code

[Max Reitz]

On 2015-03-13 at 05:47, Gerd Hoffmann wrote:
> This patch adds the core code for virtio gpu emulation,
> covering 2d support.
>
> Written by Dave Airlie and Gerd Hoffmann.
>
> Signed-off-by: Dave Airlie <address@hidden>
> Signed-off-by: Gerd Hoffmann <address@hidden>
> ---
>   hw/display/Makefile.objs       |   2 +
>   hw/display/virtio-gpu.c        | 923 +++++++++++++++++++++++++++++++++++++++++
>   include/hw/virtio/virtio-gpu.h | 147 +++++++
>   trace-events                   |  14 +
>   4 files changed, 1086 insertions(+)
>   create mode 100644 hw/display/virtio-gpu.c
>   create mode 100644 include/hw/virtio/virtio-gpu.h
>
> diff --git a/hw/display/virtio-gpu.c b/hw/display/virtio-gpu.c
> new file mode 100644
> index 0000000..ab71291
> --- /dev/null
> +++ b/hw/display/virtio-gpu.c

[snip]

> +static void virtio_gpu_device_realize(DeviceState *qdev, Error **errp)
> +{
> +    VirtIODevice *vdev = VIRTIO_DEVICE(qdev);
> +    VirtIOGPU *g = VIRTIO_GPU(qdev);
> +    int i;
> +
> +    g->config_size = sizeof(struct virtio_gpu_config);
> +    g->virtio_config.num_scanouts = g->conf.max_outputs;
> +    virtio_init(VIRTIO_DEVICE(g), "virtio-gpu", VIRTIO_ID_GPU,
> +                g->config_size);
> +
> +    g->req_state[0].width = 1024;
> +    g->req_state[0].height = 768;
> +
> +    g->ctrl_vq   = virtio_add_queue(vdev, 256, virtio_gpu_handle_ctrl_cb);
> +    g->cursor_vq = virtio_add_queue(vdev, 256, virtio_gpu_handle_cursor_cb);
> +
> +    g->ctrl_bh = qemu_bh_new(virtio_gpu_ctrl_bh, g);
> +    g->cursor_bh = qemu_bh_new(virtio_gpu_cursor_bh, g);
> +    QTAILQ_INIT(&g->reslist);
> +    QTAILQ_INIT(&g->fenceq);
> +
> +    g->enabled_output_bitmask = 1;
> +    g->qdev = qdev;
> +
> +    for (i = 0; i < g->conf.max_outputs; i++) {
> +        g->scanout[i].con =
> +            graphic_console_init(DEVICE(g), i, &virtio_gpu_ops, g);
> +        if (i > 0) {
> +            dpy_gfx_replace_surface(g->scanout[i].con, NULL);

GTK can't cope very well with NULL surfaces (read: after patch 7 (when 
using -vga virtio finally works) "x86_64-softmmu/qemu-system-x86_64 -vga 
virtio -display gtk" segfaults). With SDL (SDL2), it works fine.

A simple block like "if (!surface) { if (vc->gfx.surface) { 
cairo_surface_destroy(vc->gfx.surface); } vc->gfx.surface = NULL; 
return; }" at the beginning of gd_switch() in ui/gtk.c seems to work for 
me, though.

A similar problem exists with SDL1: Using Ctrl-Alt-2 segfaults (which is 
due to new_surface being NULL in sdl_switch(), and thus 
new_surface->format in the very first statement failing).

Max

> +        }
> +    }
> +}
> +
> +static void virtio_gpu_instance_init(Object *obj)
> +{
> +}
> +
> +static void virtio_gpu_reset(VirtIODevice *vdev)
> +{
> +    VirtIOGPU *g = VIRTIO_GPU(vdev);
> +    struct virtio_gpu_simple_resource *res, *tmp;
> +    int i;
> +
> +    g->enable = 0;
> +
> +    QTAILQ_FOREACH_SAFE(res, &g->reslist, next, tmp) {
> +        virtio_gpu_resource_destroy(g, res);
> +    }
> +    for (i = 0; i < g->conf.max_outputs; i++) {
> +#if 0
> +        g->req_state[i].x = 0;
> +        g->req_state[i].y = 0;
> +        if (i == 0) {
> +            g->req_state[0].width = 1024;
> +            g->req_state[0].height = 768;
> +        } else {
> +            g->req_state[i].width = 0;
> +            g->req_state[i].height = 0;
> +        }
> +#endif
> +        g->scanout[i].resource_id = 0;
> +        g->scanout[i].width = 0;
> +        g->scanout[i].height = 0;
> +        g->scanout[i].x = 0;
> +        g->scanout[i].y = 0;
> +        g->scanout[i].ds = NULL;
> +    }
> +    g->enabled_output_bitmask = 1;
> +}
> +
> +static Property virtio_gpu_properties[] = {
> +    DEFINE_VIRTIO_GPU_PROPERTIES(VirtIOGPU, conf),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void virtio_gpu_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +    VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass);
> +
> +    vdc->realize = virtio_gpu_device_realize;
> +    vdc->get_config = virtio_gpu_get_config;
> +    vdc->set_config = virtio_gpu_set_config;
> +    vdc->get_features = virtio_gpu_get_features;
> +    vdc->set_features = virtio_gpu_set_features;
> +
> +    vdc->reset = virtio_gpu_reset;
> +
> +    dc->props = virtio_gpu_properties;
> +}
> +
> +static const TypeInfo virtio_gpu_info = {
> +    .name = TYPE_VIRTIO_GPU,
> +    .parent = TYPE_VIRTIO_DEVICE,
> +    .instance_size = sizeof(VirtIOGPU),
> +    .instance_init = virtio_gpu_instance_init,
> +    .class_init = virtio_gpu_class_init,
> +};
> +
> +static void virtio_register_types(void)
> +{
> +    type_register_static(&virtio_gpu_info);
> +}
> +
> +type_init(virtio_register_types)
> +
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_ctrl_hdr)                != 24);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_update_cursor)           != 56);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_resource_unref)          != 32);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_resource_create_2d)      != 40);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_set_scanout)             != 48);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_resource_flush)          != 48);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_transfer_to_host_2d)     != 56);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_mem_entry)               != 16);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_resource_attach_backing) != 32);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_resource_detach_backing) != 32);
> +QEMU_BUILD_BUG_ON(sizeof(struct virtio_gpu_resp_display_info)       != 408);
> diff --git a/include/hw/virtio/virtio-gpu.h b/include/hw/virtio/virtio-gpu.h
> new file mode 100644
> index 0000000..5d26ca9
> --- /dev/null
> +++ b/include/hw/virtio/virtio-gpu.h
> @@ -0,0 +1,147 @@
> +/*
> + * Virtio GPU Device
> + *
> + * Copyright Red Hat, Inc. 2013-2014
> + *
> + * Authors:
> + *     Dave Airlie <address@hidden>
> + *     Gerd Hoffmann <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2.
> + * See the COPYING file in the top-level directory.
> + */
> +
> +#ifndef _QEMU_VIRTIO_VGA_H
> +#define _QEMU_VIRTIO_VGA_H
> +
> +#include "qemu/queue.h"
> +#include "ui/qemu-pixman.h"
> +#include "ui/console.h"
> +#include "hw/virtio/virtio.h"
> +#include "hw/pci/pci.h"
> +
> +#include "hw/virtio/virtgpu_hw.h"
> +#define TYPE_VIRTIO_GPU "virtio-gpu-device"
> +#define VIRTIO_GPU(obj)                                        \
> +        OBJECT_CHECK(VirtIOGPU, (obj), TYPE_VIRTIO_GPU)
> +
> +#define VIRTIO_ID_GPU 16
> +
> +#define VIRTIO_GPU_MAX_RES 16
> +
> +#define VIRTIO_GPU_MAX_SCANOUT 4
> +
> +struct virtio_gpu_simple_resource {
> +    uint32_t resource_id;
> +    uint32_t width;
> +    uint32_t height;
> +    uint32_t format;
> +    struct iovec *iov;
> +    unsigned int iov_cnt;
> +    uint32_t scanout_bitmask;
> +    pixman_image_t *image;
> +    QTAILQ_ENTRY(virtio_gpu_simple_resource) next;
> +};
> +
> +struct virtio_gpu_scanout {
> +    QemuConsole *con;
> +    DisplaySurface *ds;
> +    uint32_t width, height;
> +    int x, y;
> +    int invalidate;
> +    uint32_t resource_id;
> +    QEMUCursor *current_cursor;
> +};
> +
> +struct virtio_gpu_requested_state {
> +    uint32_t width, height;
> +    int x, y;
> +};
> +
> +struct virtio_gpu_conf {
> +    uint32_t max_outputs;
> +};
> +
> +struct virtio_gpu_ctrl_command {
> +    VirtQueueElement elem;
> +    VirtQueue *vq;
> +    struct virtio_gpu_ctrl_hdr cmd_hdr;
> +    uint32_t error;
> +    bool finished;
> +    QTAILQ_ENTRY(virtio_gpu_ctrl_command) next;
> +};
> +
> +typedef struct VirtIOGPU {
> +    VirtIODevice parent_obj;
> +
> +    QEMUBH *ctrl_bh;
> +    QEMUBH *cursor_bh;
> +    VirtQueue *ctrl_vq;
> +    VirtQueue *cursor_vq;
> +
> +    int enable;
> +
> +    int config_size;
> +    DeviceState *qdev;
> +
> +    QTAILQ_HEAD(, virtio_gpu_simple_resource) reslist;
> +    QTAILQ_HEAD(, virtio_gpu_ctrl_command) fenceq;
> +
> +    struct virtio_gpu_scanout scanout[VIRTIO_GPU_MAX_SCANOUT];
> +    struct virtio_gpu_requested_state req_state[VIRTIO_GPU_MAX_SCANOUT];
> +
> +    struct virtio_gpu_conf conf;
> +    int enabled_output_bitmask;
> +    struct virtio_gpu_config virtio_config;
> +
> +    QEMUTimer *fence_poll;
> +    QEMUTimer *print_stats;
> +
> +    struct {
> +        uint32_t inflight;
> +        uint32_t max_inflight;
> +        uint32_t requests;
> +        uint32_t req_3d;
> +        uint32_t bytes_3d;
> +    } stats;
> +} VirtIOGPU;
> +
> +extern const GraphicHwOps virtio_gpu_ops;
> +
> +/* to share between PCI and VGA */
> +#define DEFINE_VIRTIO_GPU_PCI_PROPERTIES(_state)               \
> +    DEFINE_PROP_BIT("ioeventfd", _state, flags,                \
> +                    VIRTIO_PCI_FLAG_USE_IOEVENTFD_BIT, false), \
> +    DEFINE_PROP_UINT32("vectors", _state, nvectors, 3)
> +
> +#define DEFINE_VIRTIO_GPU_PROPERTIES(_state, _conf_field)               \
> +    DEFINE_PROP_UINT32("max_outputs", _state, _conf_field.max_outputs, 2)
> +
> +#define VIRTIO_GPU_FILL_CMD(out) do {                                   \
> +        size_t s;                                                       \
> +        s = iov_to_buf(cmd->elem.out_sg, cmd->elem.out_num, 0,          \
> +                       &out, sizeof(out));                              \
> +        if (s != sizeof(out)) {                                         \
> +            qemu_log_mask(LOG_GUEST_ERROR,                              \
> +                          "%s: command size incorrect %zu vs %zu\n",    \
> +                          __func__, s, sizeof(out));                    \
> +            return;                                                     \
> +        }                                                               \
> +    } while (0)
> +
> +/* virtio-gpu.c */
> +void virtio_gpu_ctrl_response(VirtIOGPU *g,
> +                              struct virtio_gpu_ctrl_command *cmd,
> +                              struct virtio_gpu_ctrl_hdr *resp,
> +                              size_t resp_len);
> +void virtio_gpu_ctrl_response_nodata(VirtIOGPU *g,
> +                                     struct virtio_gpu_ctrl_command *cmd,
> +                                     enum virtio_gpu_ctrl_type type);
> +void virtio_gpu_get_display_info(VirtIOGPU *g,
> +                                 struct virtio_gpu_ctrl_command *cmd);
> +int virtio_gpu_create_mapping_iov(struct virtio_gpu_resource_attach_backing 
> *ab,
> +                                  struct virtio_gpu_ctrl_command *cmd,
> +                                  struct iovec **iov);
> +void virtio_gpu_cleanup_mapping_iov(struct iovec *iov, uint32_t count);
> +
> +#endif
> diff --git a/trace-events b/trace-events
> index 30eba92..a3d6fff 100644
> --- a/trace-events
> +++ b/trace-events
> @@ -1167,6 +1167,20 @@ vmware_scratch_read(uint32_t index, uint32_t value) "index 
> %d, value 0x%x"
>   vmware_scratch_write(uint32_t index, uint32_t value) "index %d, value 0x%x"
>   vmware_setmode(uint32_t w, uint32_t h, uint32_t bpp) "%dx%d @ %d bpp"
>   
> +# hw/display/virtio-gpu.c
> +virtio_gpu_cmd_get_display_info(void) ""
> +virtio_gpu_cmd_get_caps(void) ""
> +virtio_gpu_cmd_set_scanout(uint32_t id, uint32_t res, uint32_t w, uint32_t h, uint32_t 
> x, uint32_t y) "id %d, res 0x%x, w %d, h %d, x %d, y %d"
> +virtio_gpu_cmd_res_create_2d(uint32_t res, uint32_t fmt, uint32_t w, uint32_t h) 
> "res 0x%x, fmt 0x%x, w %d, h %d"
> +virtio_gpu_cmd_res_create_3d(uint32_t res, uint32_t fmt, uint32_t w, uint32_t h, 
> uint32_t d) "res 0x%x, fmt 0x%x, w %d, h %d, d %d"
> +virtio_gpu_cmd_res_unref(uint32_t res) "res 0x%x"
> +virtio_gpu_cmd_res_back_attach(uint32_t res) "res 0x%x"
> +virtio_gpu_cmd_res_back_detach(uint32_t res) "res 0x%x"
> +virtio_gpu_cmd_res_xfer_toh_2d(uint32_t res) "res 0x%x"
> +virtio_gpu_cmd_res_flush(uint32_t res, uint32_t w, uint32_t h, uint32_t x, uint32_t y) 
> "res 0x%x, w %d, h %d, x %d, y %d"
> +virtio_gpu_fence_ctrl(uint64_t fence, uint32_t type) "fence 0x%" PRIx64 ", type 
> 0x%x"
> +virtio_gpu_fence_resp(uint64_t fence) "fence 0x%" PRIx64
> +
>   # savevm.c
>   qemu_loadvm_state_section(unsigned int section_type) "%d"
>   qemu_loadvm_state_section_partend(uint32_t section_id) "%u"