[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 2/7] hw/vfio/platform: vfio-platform skeleto
From: |
Eric Auger |
Subject: |
Re: [Qemu-devel] [PATCH v10 2/7] hw/vfio/platform: vfio-platform skeleton |
Date: |
Fri, 13 Mar 2015 10:28:13 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:24.0) Gecko/20100101 Thunderbird/24.2.0 |
Hi Alex,
Thank you for your review and the R-b on 5/7 & 7/7.
Please apologize for the long delay in response, mostly due to my
vacation :-(
I took into account all the comments below
Best Regards
Eric
On 02/17/2015 11:56 AM, Alex Bennée wrote:
>
> Eric Auger <address@hidden> writes:
>
>> Minimal VFIO platform implementation supporting register space
>> user mapping but not IRQ assignment.
>>
>> Signed-off-by: Kim Phillips <address@hidden>
>> Signed-off-by: Eric Auger <address@hidden>
>
> See comments inline.
>
> <snip>
>> +/**
>> + * vfio_populate_device - initialize MMIO region and IRQ
>> + * @vbasedev: the VFIO device
>> + *
>> + * query the VFIO device for exposed MMIO regions and IRQ and
>> + * populate the associated fields in the device struct
>> + */
>> +static int vfio_populate_device(VFIODevice *vbasedev)
>> +{
>> + struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) };
>
> This could be inside the for block.
>
>> + int i, ret = -1;
>> + VFIOPlatformDevice *vdev =
>> + container_of(vbasedev, VFIOPlatformDevice, vbasedev);
>> +
>> + if (!(vbasedev->flags & VFIO_DEVICE_FLAGS_PLATFORM)) {
>> + error_report("vfio: Um, this isn't a platform device");
>> + goto error;
>> + }
>> +
>> + vdev->regions = g_malloc0(sizeof(VFIORegion *) *
>> vbasedev->num_regions);
>
> I may have considered a g_malloc0_n but I see that's not actually used
> in the rest of the code (newer glib?).
>
>> +
>> + for (i = 0; i < vbasedev->num_regions; i++) {
>> + vdev->regions[i] = g_malloc0(sizeof(VFIORegion));
>
> An intermediate VFIORegion *ptr here would have saved a bunch of typing
> later on ;-)
>
>> + reg_info.index = i;
>> + ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info);
>> + if (ret) {
>> + error_report("vfio: Error getting region %d info: %m", i);
>> + goto error;
>> + }
>> + vdev->regions[i]->flags = reg_info.flags;
>> + vdev->regions[i]->size = reg_info.size;
>> + vdev->regions[i]->fd_offset = reg_info.offset;
>> + vdev->regions[i]->nr = i;
>> + vdev->regions[i]->vbasedev = vbasedev;
>> +
>> + trace_vfio_platform_populate_regions(vdev->regions[i]->nr,
>> + (unsigned long)vdev->regions[i]->flags,
>> + (unsigned long)vdev->regions[i]->size,
>> + vdev->regions[i]->vbasedev->fd,
>> + (unsigned long)vdev->regions[i]->fd_offset);
>> + }
>> +
>> + return 0;
>> +error:
>> + for (i = 0; i < vbasedev->num_regions; i++) {
>> + g_free(vdev->regions[i]);
>> + }
>> + g_free(vdev->regions);
>> + return ret;
>> +}
>> +
>> +/* specialized functions ofr VFIO Platform devices */
>> +static VFIODeviceOps vfio_platform_ops = {
>> + .vfio_compute_needs_reset = vfio_platform_compute_needs_reset,
>> + .vfio_hot_reset_multi = vfio_platform_hot_reset_multi,
>> + .vfio_populate_device = vfio_populate_device,
>> +};
>> +
>> +/**
>> + * vfio_base_device_init - implements some of the VFIO mechanics
>> + * @vbasedev: the VFIO device
>> + *
>> + * retrieves the group the device belongs to and get the device fd
>> + * returns the VFIO device fd
>> + * precondition: the device name must be initialized
>> + */
>> +static int vfio_base_device_init(VFIODevice *vbasedev)
>> +{
>> + VFIOGroup *group;
>> + VFIODevice *vbasedev_iter;
>> + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name;
>> + ssize_t len;
>> + struct stat st;
>> + int groupid;
>> + int ret;
>> +
>> + /* name must be set prior to the call */
>> + if (!vbasedev->name) {
>> + return -EINVAL;
>> + }
>> +
>> + /* Check that the host device exists */
>> + snprintf(path, sizeof(path), "/sys/bus/platform/devices/%s/",
>> + vbasedev->name);
>> +
>> + if (stat(path, &st) < 0) {
>> + error_report("vfio: error: no such host device: %s", path);
>> + return -errno;
>> + }
>> +
>> + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1);
>
> Consider g_strlcat which has nicer max length semantics.
>
>> + len = readlink(path, iommu_group_path, sizeof(path));
>> + if (len <= 0 || len >= sizeof(path)) {
>
> readlink should never report more than sizeof(path) although that will
> indicate a ENAMETOOLONG.
>
>> + error_report("vfio: error no iommu_group for device");
>> + return len < 0 ? -errno : ENAMETOOLONG;
>> + }
>> +
>> + iommu_group_path[len] = 0;
>> + group_name = basename(iommu_group_path);
>> +
>> + if (sscanf(group_name, "%d", &groupid) != 1) {
>> + error_report("vfio: error reading %s: %m", path);
>> + return -errno;
>> + }
>> +
>> + trace_vfio_platform_base_device_init(vbasedev->name, groupid);
>> +
>> + group = vfio_get_group(groupid, &address_space_memory);
>> + if (!group) {
>> + error_report("vfio: failed to get group %d", groupid);
>> + return -ENOENT;
>> + }
>> +
>> + snprintf(path, sizeof(path), "%s", vbasedev->name);
>> +
>> + QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
>> + if (strcmp(vbasedev_iter->name, vbasedev->name) == 0) {
>> + error_report("vfio: error: device %s is already attached",
>> path);
>> + vfio_put_group(group);
>> + return -EBUSY;
>> + }
>> + }
>> + ret = vfio_get_device(group, path, vbasedev);
>> + if (ret) {
>> + error_report("vfio: failed to get device %s", path);
>> + vfio_put_group(group);
>> + }
>> + return ret;
>> +}
>> +
>> +/**
>> + * vfio_map_region - initialize the 2 mr (mmapped on ops) for a
>> + * given index
>> + * @vdev: the VFIO platform device
>> + * @nr: the index of the region
>> + *
>> + * init the top memory region and the mmapped memroy region beneath
>> + * VFIOPlatformDevice is used since VFIODevice is not a QOM Object
>> + * and could not be passed to memory region functions
>> +*/
>> +static void vfio_map_region(VFIOPlatformDevice *vdev, int nr)
>> +{
>> + VFIORegion *region = vdev->regions[nr];
>> + unsigned size = region->size;
>> + char name[64];
>> +
>> + if (!size) {
>> + return;
>> + }
>> +
>> + snprintf(name, sizeof(name), "VFIO %s region %d",
>> + vdev->vbasedev.name, nr);
>> +
>> + /* A "slow" read/write mapping underlies all regions */
>> + memory_region_init_io(®ion->mem, OBJECT(vdev), &vfio_region_ops,
>> + region, name, size);
>> +
>> + strncat(name, " mmap", sizeof(name) - strlen(name) - 1);
>
> again consider g_strlcat
>
>> +
>> + if (vfio_mmap_region(OBJECT(vdev), region, ®ion->mem,
>> + ®ion->mmap_mem, ®ion->mmap, size, 0, name)) {
>> + error_report("%s unsupported. Performance may be slow", name);
>> + }
>> +}
>> +
>> +/**
>> + * vfio_platform_realize - the device realize function
>> + * @dev: device state pointer
>> + * @errp: error
>> + *
>> + * initialize the device, its memory regions and IRQ structures
>> + * IRQ are started separately
>> + */
>> +static void vfio_platform_realize(DeviceState *dev, Error **errp)
>> +{
>> + VFIOPlatformDevice *vdev = VFIO_PLATFORM_DEVICE(dev);
>> + SysBusDevice *sbdev = SYS_BUS_DEVICE(dev);
>> + VFIODevice *vbasedev = &vdev->vbasedev;
>> + int i, ret;
>> +
>> + vbasedev->type = VFIO_DEVICE_TYPE_PLATFORM;
>> + vbasedev->ops = &vfio_platform_ops;
>> +
>> + trace_vfio_platform_realize(vbasedev->name, vdev->compat);
>> +
>> + ret = vfio_base_device_init(vbasedev);
>> + if (ret) {
>> + error_setg(errp, "vfio: vfio_base_device_init failed for %s",
>> + vbasedev->name);
>> + return;
>> + }
>> +
>> + for (i = 0; i < vbasedev->num_regions; i++) {
>> + vfio_map_region(vdev, i);
>> + sysbus_init_mmio(sbdev, &vdev->regions[i]->mem);
>> + }
>> +}
>> +
>> +static const VMStateDescription vfio_platform_vmstate = {
>> + .name = TYPE_VFIO_PLATFORM,
>> + .unmigratable = 1,
>> +};
>> +
>> +static Property vfio_platform_dev_properties[] = {
>> + DEFINE_PROP_STRING("host", VFIOPlatformDevice, vbasedev.name),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void vfio_platform_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> +
>> + dc->realize = vfio_platform_realize;
>> + dc->props = vfio_platform_dev_properties;
>> + dc->vmsd = &vfio_platform_vmstate;
>> + dc->desc = "VFIO-based platform device assignment";
>> + set_bit(DEVICE_CATEGORY_MISC, dc->categories);
>> +}
>> +
>> +static const TypeInfo vfio_platform_dev_info = {
>> + .name = TYPE_VFIO_PLATFORM,
>> + .parent = TYPE_SYS_BUS_DEVICE,
>> + .instance_size = sizeof(VFIOPlatformDevice),
>> + .class_init = vfio_platform_class_init,
>> + .class_size = sizeof(VFIOPlatformDeviceClass),
>> + .abstract = true,
>> +};
>> +
>> +static void register_vfio_platform_dev_type(void)
>> +{
>> + type_register_static(&vfio_platform_dev_info);
>> +}
>> +
>> +type_init(register_vfio_platform_dev_type)
>> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
>> index 5f3679b..2d1d8b3 100644
>> --- a/include/hw/vfio/vfio-common.h
>> +++ b/include/hw/vfio/vfio-common.h
>> @@ -43,6 +43,7 @@
>>
>> enum {
>> VFIO_DEVICE_TYPE_PCI = 0,
>> + VFIO_DEVICE_TYPE_PLATFORM = 1,
>> };
>>
>> typedef struct VFIORegion {
>> diff --git a/include/hw/vfio/vfio-platform.h
>> b/include/hw/vfio/vfio-platform.h
>> new file mode 100644
>> index 0000000..338f0c6
>> --- /dev/null
>> +++ b/include/hw/vfio/vfio-platform.h
>> @@ -0,0 +1,44 @@
>> +/*
>> + * vfio based device assignment support - platform devices
>> + *
>> + * Copyright Linaro Limited, 2014
>> + *
>> + * Authors:
>> + * Kim Phillips <address@hidden>
>> + *
>> + * This work is licensed under the terms of the GNU GPL, version 2. See
>> + * the COPYING file in the top-level directory.
>> + *
>> + * Based on vfio based PCI device assignment support:
>> + * Copyright Red Hat, Inc. 2012
>> + */
>> +
>> +#ifndef HW_VFIO_VFIO_PLATFORM_H
>> +#define HW_VFIO_VFIO_PLATFORM_H
>> +
>> +#include "hw/sysbus.h"
>> +#include "hw/vfio/vfio-common.h"
>> +
>> +#define TYPE_VFIO_PLATFORM "vfio-platform"
>> +
>> +typedef struct VFIOPlatformDevice {
>> + SysBusDevice sbdev;
>> + VFIODevice vbasedev; /* not a QOM object */
>> + VFIORegion **regions;
>> + char *compat; /* compatibility string */
>> +} VFIOPlatformDevice;
>> +
>> +typedef struct VFIOPlatformDeviceClass {
>> + /*< private >*/
>> + SysBusDeviceClass parent_class;
>> + /*< public >*/
>> +} VFIOPlatformDeviceClass;
>> +
>> +#define VFIO_PLATFORM_DEVICE(obj) \
>> + OBJECT_CHECK(VFIOPlatformDevice, (obj), TYPE_VFIO_PLATFORM)
>> +#define VFIO_PLATFORM_DEVICE_CLASS(klass) \
>> + OBJECT_CLASS_CHECK(VFIOPlatformDeviceClass, (klass),
>> TYPE_VFIO_PLATFORM)
>> +#define VFIO_PLATFORM_DEVICE_GET_CLASS(obj) \
>> + OBJECT_GET_CLASS(VFIOPlatformDeviceClass, (obj), TYPE_VFIO_PLATFORM)
>> +
>> +#endif /*HW_VFIO_VFIO_PLATFORM_H*/
>> diff --git a/trace-events b/trace-events
>> index f87b077..d3685c9 100644
>> --- a/trace-events
>> +++ b/trace-events
>> @@ -1556,6 +1556,18 @@ vfio_put_group(int fd) "close group->fd=%d"
>> vfio_get_device(const char * name, unsigned int flags, unsigned int
>> num_regions, unsigned int num_irqs) "Device %s flags: %u, regions: %u, irqs:
>> %u"
>> vfio_put_base_device(int fd) "close vdev->fd=%d"
>>
>> +# hw/vfio/platform.c
>> +vfio_platform_eoi(int pin, int fd) "EOI IRQ pin %d (fd=%d)"
>> +vfio_platform_mmap_set_enabled(bool enabled) "fast path = %d"
>> +vfio_platform_intp_mmap_enable(int pin) "IRQ #%d still active, stay in slow
>> path"
>> +vfio_platform_intp_interrupt(int pin, int fd) "Handle IRQ #%d (fd = %d)"
>> +vfio_platform_populate_interrupts(int pin, int count, int flags) "- IRQ
>> index %d: count %d, flags=0x%x"
>> +vfio_platform_populate_regions(int region_index, unsigned long flag,
>> unsigned long size, int fd, unsigned long offset) "- region %d flags =
>> 0x%lx, size = 0x%lx, fd= %d, offset = 0x%lx"
>> +vfio_platform_base_device_init(char *name, int groupid) "%s belongs to
>> group #%d"
>> +vfio_platform_realize(char *name, char *compat) "vfio device %s, compat =
>> %s"
>> +vfio_intp_interrupt_set_pending(int index) "irq %d is set PENDING"
>> +vfio_platform_eoi_handle_pending(int index) "handle PENDING IRQ %d"
>> +
>> #hw/acpi/memory_hotplug.c
>> mhp_acpi_invalid_slot_selected(uint32_t slot) "0x%"PRIx32
>> mhp_acpi_read_addr_lo(uint32_t slot, uint32_t addr) "slot[0x%"PRIx32"] addr
>> lo: 0x%"PRIx32
>
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-devel] [PATCH v10 2/7] hw/vfio/platform: vfio-platform skeleton,
Eric Auger <=