[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 12/14] qtest/ahci: remove getter/setter macros
From: |
Paolo Bonzini |
Subject: |
Re: [Qemu-devel] [PATCH 12/14] qtest/ahci: remove getter/setter macros |
Date: |
Mon, 19 Jan 2015 18:10:14 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.3.0 |
On 13/01/2015 04:34, John Snow wrote:
> These macros were a bad idea: They relied upon certain arguments being
> present locally with a specific name.
>
> With the endgoal being to factor out AHCI helper functions outside of
> the test file itself, these have to be replaced by more explicit helper
> setter/getter functions.
>
> Signed-off-by: John Snow <address@hidden>
> ---
> tests/ahci-test.c | 178
> +++++++++++++++++++++++++-----------------------------
> 1 file changed, 83 insertions(+), 95 deletions(-)
>
> diff --git a/tests/ahci-test.c b/tests/ahci-test.c
> index ef751a4..0bf572e 100644
> --- a/tests/ahci-test.c
> +++ b/tests/ahci-test.c
> @@ -46,21 +46,6 @@
> static char tmp_path[] = "/tmp/qtest.XXXXXX";
> static bool ahci_pedantic;
>
> -/*** IO macros for the AHCI memory registers. ***/
> -#define AHCI_READ(OFST) ahci_mread(ahci, (OFST))
> -#define AHCI_WRITE(OFST, VAL) ahci_mwrite(ahci, (OFST), (VAL))
> -#define AHCI_RREG(regno) ahci_rreg(ahci, (regno))
> -#define AHCI_WREG(regno, val) ahci_wreg(ahci, (regno), (val))
> -#define AHCI_SET(regno, mask) ahci_set(ahci, (regno), (mask))
> -#define AHCI_CLR(regno, mask) ahci_clr(ahci, (regno), (mask))
> -
> -/*** IO macros for port-specific offsets inside of AHCI memory. ***/
> -#define PX_OFST(port, regno) ahci_px_ofst((port), (regno))
> -#define PX_RREG(port, regno) ahci_px_rreg(ahci, (port), (regno))
> -#define PX_WREG(port, regno, val) ahci_px_wreg(ahci, (port), (regno), (val))
> -#define PX_SET(port, reg, mask) ahci_px_set(ahci, (port), (reg), (mask))
> -#define PX_CLR(port, reg, mask) ahci_px_clr(ahci, (port), (reg), (mask))
> -
> /*** Function Declarations ***/
> static QPCIDevice *get_ahci_device(uint32_t *fingerprint);
> static void start_ahci_device(AHCIQState *ahci);
> @@ -228,20 +213,20 @@ static void ahci_hba_enable(AHCIQState *ahci)
> g_assert(ahci != NULL);
>
> /* Set GHC.AE to 1 */
> - AHCI_SET(AHCI_GHC, AHCI_GHC_AE);
> - reg = AHCI_RREG(AHCI_GHC);
> + ahci_set(ahci, AHCI_GHC, AHCI_GHC_AE);
> + reg = ahci_rreg(ahci, AHCI_GHC);
> ASSERT_BIT_SET(reg, AHCI_GHC_AE);
>
> /* Cache CAP and CAP2. */
> - ahci->cap = AHCI_RREG(AHCI_CAP);
> - ahci->cap2 = AHCI_RREG(AHCI_CAP2);
> + ahci->cap = ahci_rreg(ahci, AHCI_CAP);
> + ahci->cap2 = ahci_rreg(ahci, AHCI_CAP2);
>
> /* Read CAP.NCS, how many command slots do we have? */
> num_cmd_slots = ((ahci->cap & AHCI_CAP_NCS) >> ctzl(AHCI_CAP_NCS)) + 1;
> g_test_message("Number of Command Slots: %u", num_cmd_slots);
>
> /* Determine which ports are implemented. */
> - ports_impl = AHCI_RREG(AHCI_PI);
> + ports_impl = ahci_rreg(ahci, AHCI_PI);
>
> for (i = 0; ports_impl; ports_impl >>= 1, ++i) {
> if (!(ports_impl & 0x01)) {
> @@ -250,16 +235,17 @@ static void ahci_hba_enable(AHCIQState *ahci)
>
> g_test_message("Initializing port %u", i);
>
> - reg = PX_RREG(i, AHCI_PX_CMD);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
> if (BITCLR(reg, AHCI_PX_CMD_ST | AHCI_PX_CMD_CR |
> AHCI_PX_CMD_FRE | AHCI_PX_CMD_FR)) {
> g_test_message("port is idle");
> } else {
> g_test_message("port needs to be idled");
> - PX_CLR(i, AHCI_PX_CMD, (AHCI_PX_CMD_ST | AHCI_PX_CMD_FRE));
> + ahci_px_clr(ahci, i, AHCI_PX_CMD,
> + (AHCI_PX_CMD_ST | AHCI_PX_CMD_FRE));
> /* The port has 500ms to disengage. */
> usleep(500000);
> - reg = PX_RREG(i, AHCI_PX_CMD);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CR);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FR);
> g_test_message("port is now idle");
> @@ -271,55 +257,56 @@ static void ahci_hba_enable(AHCIQState *ahci)
> /* PxCLB space ... 0x20 per command, as in 4.2.2 p 36 */
> clb = ahci_alloc(ahci, num_cmd_slots * 0x20);
> g_test_message("CLB: 0x%08x", clb);
> - PX_WREG(i, AHCI_PX_CLB, clb);
> - g_assert_cmphex(clb, ==, PX_RREG(i, AHCI_PX_CLB));
> + ahci_px_wreg(ahci, i, AHCI_PX_CLB, clb);
> + g_assert_cmphex(clb, ==, ahci_px_rreg(ahci, i, AHCI_PX_CLB));
>
> /* PxFB space ... 0x100, as in 4.2.1 p 35 */
> fb = ahci_alloc(ahci, 0x100);
> g_test_message("FB: 0x%08x", fb);
> - PX_WREG(i, AHCI_PX_FB, fb);
> - g_assert_cmphex(fb, ==, PX_RREG(i, AHCI_PX_FB));
> + ahci_px_wreg(ahci, i, AHCI_PX_FB, fb);
> + g_assert_cmphex(fb, ==, ahci_px_rreg(ahci, i, AHCI_PX_FB));
>
> /* Clear PxSERR, PxIS, then IS.IPS[x] by writing '1's. */
> - PX_WREG(i, AHCI_PX_SERR, 0xFFFFFFFF);
> - PX_WREG(i, AHCI_PX_IS, 0xFFFFFFFF);
> - AHCI_WREG(AHCI_IS, (1 << i));
> + ahci_px_wreg(ahci, i, AHCI_PX_SERR, 0xFFFFFFFF);
> + ahci_px_wreg(ahci, i, AHCI_PX_IS, 0xFFFFFFFF);
> + ahci_wreg(ahci, AHCI_IS, (1 << i));
>
> /* Verify Interrupts Cleared */
> - reg = PX_RREG(i, AHCI_PX_SERR);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
> g_assert_cmphex(reg, ==, 0);
>
> - reg = PX_RREG(i, AHCI_PX_IS);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
> g_assert_cmphex(reg, ==, 0);
>
> - reg = AHCI_RREG(AHCI_IS);
> + reg = ahci_rreg(ahci, AHCI_IS);
> ASSERT_BIT_CLEAR(reg, (1 << i));
>
> /* Enable All Interrupts: */
> - PX_WREG(i, AHCI_PX_IE, 0xFFFFFFFF);
> - reg = PX_RREG(i, AHCI_PX_IE);
> + ahci_px_wreg(ahci, i, AHCI_PX_IE, 0xFFFFFFFF);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_IE);
> g_assert_cmphex(reg, ==, ~((uint32_t)AHCI_PX_IE_RESERVED));
>
> /* Enable the FIS Receive Engine. */
> - PX_SET(i, AHCI_PX_CMD, AHCI_PX_CMD_FRE);
> - reg = PX_RREG(i, AHCI_PX_CMD);
> + ahci_px_set(ahci, i, AHCI_PX_CMD, AHCI_PX_CMD_FRE);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
> ASSERT_BIT_SET(reg, AHCI_PX_CMD_FR);
>
> /* AHCI 1.3 spec: if !STS.BSY, !STS.DRQ and PxSSTS.DET indicates
> * physical presence, a device is present and may be started.
> However,
> * PxSERR.DIAG.X /may/ need to be cleared a priori. */
> - reg = PX_RREG(i, AHCI_PX_SERR);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
> if (BITSET(reg, AHCI_PX_SERR_DIAG_X)) {
> - PX_SET(i, AHCI_PX_SERR, AHCI_PX_SERR_DIAG_X);
> + ahci_px_set(ahci, i, AHCI_PX_SERR, AHCI_PX_SERR_DIAG_X);
> }
>
> - reg = PX_RREG(i, AHCI_PX_TFD);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_TFD);
> if (BITCLR(reg, AHCI_PX_TFD_STS_BSY | AHCI_PX_TFD_STS_DRQ)) {
> - reg = PX_RREG(i, AHCI_PX_SSTS);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_SSTS);
> if ((reg & AHCI_PX_SSTS_DET) == SSTS_DET_ESTABLISHED) {
> /* Device Found: set PxCMD.ST := 1 */
> - PX_SET(i, AHCI_PX_CMD, AHCI_PX_CMD_ST);
> - ASSERT_BIT_SET(PX_RREG(i, AHCI_PX_CMD), AHCI_PX_CMD_CR);
> + ahci_px_set(ahci, i, AHCI_PX_CMD, AHCI_PX_CMD_ST);
> + ASSERT_BIT_SET(ahci_px_rreg(ahci, i, AHCI_PX_CMD),
> + AHCI_PX_CMD_CR);
> g_test_message("Started Device %u", i);
> } else if ((reg & AHCI_PX_SSTS_DET)) {
> /* Device present, but in some unknown state. */
> @@ -329,8 +316,8 @@ static void ahci_hba_enable(AHCIQState *ahci)
> }
>
> /* Enable GHC.IE */
> - AHCI_SET(AHCI_GHC, AHCI_GHC_IE);
> - reg = AHCI_RREG(AHCI_GHC);
> + ahci_set(ahci, AHCI_GHC, AHCI_GHC_IE);
> + reg = ahci_rreg(ahci, AHCI_GHC);
> ASSERT_BIT_SET(reg, AHCI_GHC_IE);
>
> /* TODO: The device should now be idling and waiting for commands.
> @@ -602,11 +589,11 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> */
>
> /* 1 CAP - Capabilities Register */
> - ahci->cap = AHCI_RREG(AHCI_CAP);
> + ahci->cap = ahci_rreg(ahci, AHCI_CAP);
> ASSERT_BIT_CLEAR(ahci->cap, AHCI_CAP_RESERVED);
>
> /* 2 GHC - Global Host Control */
> - reg = AHCI_RREG(AHCI_GHC);
> + reg = ahci_rreg(ahci, AHCI_GHC);
> ASSERT_BIT_CLEAR(reg, AHCI_GHC_HR);
> ASSERT_BIT_CLEAR(reg, AHCI_GHC_IE);
> ASSERT_BIT_CLEAR(reg, AHCI_GHC_MRSM);
> @@ -619,11 +606,11 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> }
>
> /* 3 IS - Interrupt Status */
> - reg = AHCI_RREG(AHCI_IS);
> + reg = ahci_rreg(ahci, AHCI_IS);
> g_assert_cmphex(reg, ==, 0);
>
> /* 4 PI - Ports Implemented */
> - ports = AHCI_RREG(AHCI_PI);
> + ports = ahci_rreg(ahci, AHCI_PI);
> /* Ports Implemented must be non-zero. */
> g_assert_cmphex(ports, !=, 0);
> /* Ports Implemented must be <= Number of Ports. */
> @@ -639,7 +626,7 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> g_assert_cmphex((reg >> maxports), ==, 0);
>
> /* 5 AHCI Version */
> - reg = AHCI_RREG(AHCI_VS);
> + reg = ahci_rreg(ahci, AHCI_VS);
> switch (reg) {
> case AHCI_VERSION_0_95:
> case AHCI_VERSION_1_0:
> @@ -652,7 +639,7 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> }
>
> /* 6 Command Completion Coalescing Control: depends on CAP.CCCS. */
> - reg = AHCI_RREG(AHCI_CCCCTL);
> + reg = ahci_rreg(ahci, AHCI_CCCCTL);
> if (BITSET(ahci->cap, AHCI_CAP_CCCS)) {
> ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_EN);
> ASSERT_BIT_CLEAR(reg, AHCI_CCCCTL_RESERVED);
> @@ -663,18 +650,18 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> }
>
> /* 7 CCC_PORTS */
> - reg = AHCI_RREG(AHCI_CCCPORTS);
> + reg = ahci_rreg(ahci, AHCI_CCCPORTS);
> /* Must be zeroes initially regardless of CAP.CCCS */
> g_assert_cmphex(reg, ==, 0);
>
> /* 8 EM_LOC */
> - reg = AHCI_RREG(AHCI_EMLOC);
> + reg = ahci_rreg(ahci, AHCI_EMLOC);
> if (BITCLR(ahci->cap, AHCI_CAP_EMS)) {
> g_assert_cmphex(reg, ==, 0);
> }
>
> /* 9 EM_CTL */
> - reg = AHCI_RREG(AHCI_EMCTL);
> + reg = ahci_rreg(ahci, AHCI_EMCTL);
> if (BITSET(ahci->cap, AHCI_CAP_EMS)) {
> ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_STSMR);
> ASSERT_BIT_CLEAR(reg, AHCI_EMCTL_CTLTM);
> @@ -685,17 +672,17 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> }
>
> /* 10 CAP2 -- Capabilities Extended */
> - ahci->cap2 = AHCI_RREG(AHCI_CAP2);
> + ahci->cap2 = ahci_rreg(ahci, AHCI_CAP2);
> ASSERT_BIT_CLEAR(ahci->cap2, AHCI_CAP2_RESERVED);
>
> /* 11 BOHC -- Bios/OS Handoff Control */
> - reg = AHCI_RREG(AHCI_BOHC);
> + reg = ahci_rreg(ahci, AHCI_BOHC);
> g_assert_cmphex(reg, ==, 0);
>
> /* 12 -- 23: Reserved */
> g_test_message("Verifying HBA reserved area is empty.");
> for (i = AHCI_RESERVED; i < AHCI_NVMHCI; ++i) {
> - reg = AHCI_RREG(i);
> + reg = ahci_rreg(ahci, i);
> g_assert_cmphex(reg, ==, 0);
> }
>
> @@ -703,7 +690,7 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> if (BITCLR(ahci->cap2, AHCI_CAP2_NVMP)) {
> g_test_message("Verifying HBA/NVMHCI area is empty.");
> for (i = AHCI_NVMHCI; i < AHCI_VENDOR; ++i) {
> - reg = AHCI_RREG(i);
> + reg = ahci_rreg(ahci, i);
> g_assert_cmphex(reg, ==, 0);
> }
> }
> @@ -711,7 +698,7 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> /* 40 -- 63: Vendor */
> g_test_message("Verifying HBA/Vendor area is empty.");
> for (i = AHCI_VENDOR; i < AHCI_PORTS; ++i) {
> - reg = AHCI_RREG(i);
> + reg = ahci_rreg(ahci, i);
> g_assert_cmphex(reg, ==, 0);
> }
>
> @@ -728,7 +715,7 @@ static void ahci_test_hba_spec(AHCIQState *ahci)
> "(reg [%u-%u]) is empty.",
> i, low, high - 1);
> for (j = low; j < high; ++j) {
> - reg = AHCI_RREG(j);
> + reg = ahci_rreg(ahci, j);
> g_assert_cmphex(reg, ==, 0);
> }
> }
> @@ -744,35 +731,35 @@ static void ahci_test_port_spec(AHCIQState *ahci,
> uint8_t port)
> unsigned i;
>
> /* (0) CLB */
> - reg = PX_RREG(port, AHCI_PX_CLB);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_CLB);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_CLB_RESERVED);
>
> /* (1) CLBU */
> if (BITCLR(ahci->cap, AHCI_CAP_S64A)) {
> - reg = PX_RREG(port, AHCI_PX_CLBU);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_CLBU);
> g_assert_cmphex(reg, ==, 0);
> }
>
> /* (2) FB */
> - reg = PX_RREG(port, AHCI_PX_FB);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_FB);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_FB_RESERVED);
>
> /* (3) FBU */
> if (BITCLR(ahci->cap, AHCI_CAP_S64A)) {
> - reg = PX_RREG(port, AHCI_PX_FBU);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_FBU);
> g_assert_cmphex(reg, ==, 0);
> }
>
> /* (4) IS */
> - reg = PX_RREG(port, AHCI_PX_IS);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_IS);
> g_assert_cmphex(reg, ==, 0);
>
> /* (5) IE */
> - reg = PX_RREG(port, AHCI_PX_IE);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_IE);
> g_assert_cmphex(reg, ==, 0);
>
> /* (6) CMD */
> - reg = PX_RREG(port, AHCI_PX_CMD);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_CMD);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_FRE);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_RESERVED);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_CMD_CCS);
> @@ -810,11 +797,11 @@ static void ahci_test_port_spec(AHCIQState *ahci,
> uint8_t port)
> }
>
> /* (7) RESERVED */
> - reg = PX_RREG(port, AHCI_PX_RES1);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_RES1);
> g_assert_cmphex(reg, ==, 0);
>
> /* (8) TFD */
> - reg = PX_RREG(port, AHCI_PX_TFD);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
> /* At boot, prior to an FIS being received, the TFD register should be
> 0x7F,
> * which breaks down as follows, as seen in AHCI 1.3 sec 3.3.8, p. 27. */
> ASSERT_BIT_SET(reg, AHCI_PX_TFD_STS_ERR);
> @@ -832,33 +819,33 @@ static void ahci_test_port_spec(AHCIQState *ahci,
> uint8_t port)
> * so we cannot expect a value here. AHCI 1.3, sec 3.3.9, pp 27-28 */
>
> /* (10) SSTS / SCR0: SStatus */
> - reg = PX_RREG(port, AHCI_PX_SSTS);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_SSTS);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_SSTS_RESERVED);
> /* Even though the register should be 0 at boot, it is asynchronous and
> * prone to change, so we cannot test any well known value. */
>
> /* (11) SCTL / SCR2: SControl */
> - reg = PX_RREG(port, AHCI_PX_SCTL);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_SCTL);
> g_assert_cmphex(reg, ==, 0);
>
> /* (12) SERR / SCR1: SError */
> - reg = PX_RREG(port, AHCI_PX_SERR);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_SERR);
> g_assert_cmphex(reg, ==, 0);
>
> /* (13) SACT / SCR3: SActive */
> - reg = PX_RREG(port, AHCI_PX_SACT);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_SACT);
> g_assert_cmphex(reg, ==, 0);
>
> /* (14) CI */
> - reg = PX_RREG(port, AHCI_PX_CI);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_CI);
> g_assert_cmphex(reg, ==, 0);
>
> /* (15) SNTF */
> - reg = PX_RREG(port, AHCI_PX_SNTF);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_SNTF);
> g_assert_cmphex(reg, ==, 0);
>
> /* (16) FBS */
> - reg = PX_RREG(port, AHCI_PX_FBS);
> + reg = ahci_px_rreg(ahci, port, AHCI_PX_FBS);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_EN);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_DEC);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_FBS_SDE);
> @@ -872,13 +859,13 @@ static void ahci_test_port_spec(AHCIQState *ahci,
> uint8_t port)
>
> /* [17 -- 27] RESERVED */
> for (i = AHCI_PX_RES2; i < AHCI_PX_VS; ++i) {
> - reg = PX_RREG(port, i);
> + reg = ahci_px_rreg(ahci, port, i);
> g_assert_cmphex(reg, ==, 0);
> }
>
> /* [28 -- 31] Vendor-Specific */
> for (i = AHCI_PX_VS; i < 32; ++i) {
> - reg = PX_RREG(port, i);
> + reg = ahci_px_rreg(ahci, port, i);
> if (reg) {
> g_test_message("INFO: Vendor register %u non-empty", i);
> }
> @@ -918,7 +905,7 @@ static void ahci_test_identify(AHCIQState *ahci)
> */
>
> /* Pick the first implemented and running port */
> - ports = AHCI_RREG(AHCI_PI);
> + ports = ahci_rreg(ahci, AHCI_PI);
> for (i = 0; i < 32; ports >>= 1, ++i) {
> if (ports == 0) {
> i = 32;
> @@ -928,7 +915,7 @@ static void ahci_test_identify(AHCIQState *ahci)
> continue;
> }
>
> - reg = PX_RREG(i, AHCI_PX_CMD);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_CMD);
> if (BITSET(reg, AHCI_PX_CMD_ST)) {
> break;
> }
> @@ -937,12 +924,12 @@ static void ahci_test_identify(AHCIQState *ahci)
> g_test_message("Selected port %u for test", i);
>
> /* Clear out this port's interrupts (ignore the init register d2h fis) */
> - reg = PX_RREG(i, AHCI_PX_IS);
> - PX_WREG(i, AHCI_PX_IS, reg);
> - g_assert_cmphex(PX_RREG(i, AHCI_PX_IS), ==, 0);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
> + ahci_px_wreg(ahci, i, AHCI_PX_IS, reg);
> + g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_IS), ==, 0);
>
> /* Wipe the FIS-Recieve Buffer */
> - fb = PX_RREG(i, AHCI_PX_FB);
> + fb = ahci_px_rreg(ahci, i, AHCI_PX_FB);
> g_assert_cmphex(fb, !=, 0);
> qmemset(fb, 0x00, 0x100);
>
> @@ -957,7 +944,7 @@ static void ahci_test_identify(AHCIQState *ahci)
> g_assert(data_ptr);
>
> /* Grab the Command List Buffer pointer */
> - clb = PX_RREG(i, AHCI_PX_CLB);
> + clb = ahci_px_rreg(ahci, i, AHCI_PX_CLB);
> g_assert(clb);
>
> /* Copy the existing Command #0 structure from the CLB into local memory,
> @@ -985,7 +972,7 @@ static void ahci_test_identify(AHCIQState *ahci)
> fis.flags = 0x80; /* Indicate this is a command FIS */
>
> /* We've committed nothing yet, no interrupts should be posted yet. */
> - g_assert_cmphex(PX_RREG(i, AHCI_PX_IS), ==, 0);
> + g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_IS), ==, 0);
>
> /* Commit the Command FIS to the Command Table */
> memwrite(table, &fis, sizeof(fis));
> @@ -997,29 +984,30 @@ static void ahci_test_identify(AHCIQState *ahci)
> memwrite(clb, &cmd, sizeof(cmd));
>
> /* Everything is in place, but we haven't given the go-ahead yet. */
> - g_assert_cmphex(PX_RREG(i, AHCI_PX_IS), ==, 0);
> + g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_IS), ==, 0);
>
> /* Issue Command #0 via PxCI */
> - PX_WREG(i, AHCI_PX_CI, (1 << 0));
> - while (BITSET(PX_RREG(i, AHCI_PX_TFD), AHCI_PX_TFD_STS_BSY)) {
> + ahci_px_wreg(ahci, i, AHCI_PX_CI, (1 << 0));
> + while (BITSET(ahci_px_rreg(ahci, i, AHCI_PX_TFD), AHCI_PX_TFD_STS_BSY)) {
> usleep(50);
> }
>
> /* Check for expected interrupts */
> - reg = PX_RREG(i, AHCI_PX_IS);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_IS);
> ASSERT_BIT_SET(reg, AHCI_PX_IS_DHRS);
> ASSERT_BIT_SET(reg, AHCI_PX_IS_PSS);
> /* BUG: we expect AHCI_PX_IS_DPS to be set. */
> ASSERT_BIT_CLEAR(reg, AHCI_PX_IS_DPS);
>
> /* Clear expected interrupts and assert all interrupts now cleared. */
> - PX_WREG(i, AHCI_PX_IS, AHCI_PX_IS_DHRS | AHCI_PX_IS_PSS |
> AHCI_PX_IS_DPS);
> - g_assert_cmphex(PX_RREG(i, AHCI_PX_IS), ==, 0);
> + ahci_px_wreg(ahci, i, AHCI_PX_IS,
> + AHCI_PX_IS_DHRS | AHCI_PX_IS_PSS | AHCI_PX_IS_DPS);
> + g_assert_cmphex(ahci_px_rreg(ahci, i, AHCI_PX_IS), ==, 0);
>
> /* Check for errors. */
> - reg = PX_RREG(i, AHCI_PX_SERR);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_SERR);
> g_assert_cmphex(reg, ==, 0);
> - reg = PX_RREG(i, AHCI_PX_TFD);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_TFD);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_ERR);
> ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_ERR);
>
> @@ -1036,7 +1024,7 @@ static void ahci_test_identify(AHCIQState *ahci)
> g_assert_cmphex(pio->status, ==, d2h->status);
> g_assert_cmphex(pio->error, ==, d2h->error);
>
> - reg = PX_RREG(i, AHCI_PX_TFD);
> + reg = ahci_px_rreg(ahci, i, AHCI_PX_TFD);
> g_assert_cmphex((reg & AHCI_PX_TFD_ERR), ==, pio->error);
> g_assert_cmphex((reg & AHCI_PX_TFD_STS), ==, pio->status);
> /* The PIO Setup FIS contains a "bytes read" field, which is a
>
Assuming this was just done with search and replace,
Reviewed-by: Paolo Bonzini <address@hidden>
- [Qemu-devel] [PATCH 07/14] qtest/ahci: Store hba_base in AHCIQState, (continued)
- [Qemu-devel] [PATCH 07/14] qtest/ahci: Store hba_base in AHCIQState, John Snow, 2015/01/12
- [Qemu-devel] [PATCH 06/14] libqos: add pc specific interface, John Snow, 2015/01/12
- [Qemu-devel] [PATCH 11/14] libqos/ahci: Functional register helpers, John Snow, 2015/01/12
- [Qemu-devel] [PATCH 08/14] qtest/ahci: finalize AHCIQState consolidation, John Snow, 2015/01/12
- [Qemu-devel] [PATCH 12/14] qtest/ahci: remove getter/setter macros, John Snow, 2015/01/12
- Re: [Qemu-devel] [PATCH 12/14] qtest/ahci: remove getter/setter macros,
Paolo Bonzini <=
- [Qemu-devel] [PATCH 13/14] qtest/ahci: Bookmark FB and CLB pointers, John Snow, 2015/01/12
- [Qemu-devel] [PATCH 09/14] qtest/ahci: remove pcibus global, John Snow, 2015/01/12
- [Qemu-devel] [PATCH 14/14] libqos/ahci: create libqos/ahci.c, John Snow, 2015/01/12