[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions
From: |
Frank Blaschka |
Subject: |
Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions |
Date: |
Wed, 12 Nov 2014 09:49:44 +0100 |
User-agent: |
Mutt/1.5.17 (2007-11-01) |
On Tue, Nov 11, 2014 at 04:24:24PM +0100, Alexander Graf wrote:
>
>
> On 11.11.14 15:08, Frank Blaschka wrote:
> > On Tue, Nov 11, 2014 at 01:51:25PM +0100, Alexander Graf wrote:
> >>
> >>
> >>
> >>> Am 11.11.2014 um 13:39 schrieb Frank Blaschka <address@hidden>:
> >>>
> >>>> On Tue, Nov 11, 2014 at 01:16:04PM +0100, Alexander Graf wrote:
> >>>>
> >>>>
> >>>>> On 11.11.14 13:10, Frank Blaschka wrote:
> >>>>>> On Mon, Nov 10, 2014 at 04:56:21PM +0100, Alexander Graf wrote:
> >>>>>>
> >>>>>>
> >>>>>>> On 10.11.14 15:20, Frank Blaschka wrote:
> >>>>>>> From: Frank Blaschka <address@hidden>
> >>>>>>>
> >>>>>>> This patch implements the s390 pci instructions in qemu. It allows
> >>>>>>> to access and drive pci devices attached to the s390 pci bus.
> >>>>>>> Because of platform constrains devices using IO BARs are not
> >>>>>>> supported. Also a device has to support MSI/MSI-X to run on s390.
> >>>>>>>
> >>>>>>> Signed-off-by: Frank Blaschka <address@hidden>
> >>>>>>> ---
> >>>>>>> target-s390x/Makefile.objs | 2 +-
> >>>>>>> target-s390x/kvm.c | 52 ++++
> >>>>>>> target-s390x/pci_ic.c | 753
> >>>>>>> +++++++++++++++++++++++++++++++++++++++++++++
> >>>>>>> target-s390x/pci_ic.h | 335 ++++++++++++++++++++
> >>>>>>> 4 files changed, 1141 insertions(+), 1 deletion(-)
> >>>>>>> create mode 100644 target-s390x/pci_ic.c
> >>>>>>> create mode 100644 target-s390x/pci_ic.h
> >>>>>>>
> >>>>
> >>>> [...]
> >>>>
> >>>>>>> +int kvm_pcilg_service_call(S390CPU *cpu, struct kvm_run *run)
> >>>>>>> +{
> >>>>>>> + CPUS390XState *env = &cpu->env;
> >>>>>>> + S390PCIBusDevice *pbdev;
> >>>>>>> + uint8_t r1 = (run->s390_sieic.ipb & 0x00f00000) >> 20;
> >>>>>>> + uint8_t r2 = (run->s390_sieic.ipb & 0x000f0000) >> 16;
> >>>>>>> + PciLgStg *rp;
> >>>>>>> + uint64_t offset;
> >>>>>>> + uint64_t data;
> >>>>>>> + uint8_t len;
> >>>>>>> +
> >>>>>>> + cpu_synchronize_state(CPU(cpu));
> >>>>>>> +
> >>>>>>> + if (env->psw.mask & PSW_MASK_PSTATE) {
> >>>>>>> + program_interrupt(env, PGM_PRIVILEGED, 4);
> >>>>>>> + return 0;
> >>>>>>> + }
> >>>>>>> +
> >>>>>>> + if (r2 & 0x1) {
> >>>>>>> + program_interrupt(env, PGM_SPECIFICATION, 4);
> >>>>>>> + return 0;
> >>>>>>> + }
> >>>>>>> +
> >>>>>>> + rp = (PciLgStg *)&env->regs[r2];
> >>>>>>> + offset = env->regs[r2 + 1];
> >>>>>>> +
> >>>>>>> + pbdev = s390_pci_find_dev_by_fh(rp->fh);
> >>>>>>> + if (!pbdev) {
> >>>>>>> + DPRINTF("pcilg no pci dev\n");
> >>>>>>> + setcc(cpu, ZPCI_PCI_LS_INVAL_HANDLE);
> >>>>>>> + return 0;
> >>>>>>> + }
> >>>>>>> +
> >>>>>>> + len = rp->len & 0xF;
> >>>>>>> + if (rp->pcias < 6) {
> >>>>>>> + if ((8 - (offset & 0x7)) < len) {
> >>>>>>> + program_interrupt(env, PGM_OPERAND, 4);
> >>>>>>> + return 0;
> >>>>>>> + }
> >>>>>>> + MemoryRegion *mr = pbdev->pdev->io_regions[rp->pcias].memory;
> >>>>>>> + io_mem_read(mr, offset, &data, len);
> >>>>>>> + } else if (rp->pcias == 15) {
> >>>>>>> + if ((4 - (offset & 0x3)) < len) {
> >>>>>>> + program_interrupt(env, PGM_OPERAND, 4);
> >>>>>>> + return 0;
> >>>>>>> + }
> >>>>>>> + data = pci_host_config_read_common(
> >>>>>>> + pbdev->pdev, offset,
> >>>>>>> pci_config_size(pbdev->pdev), len);
> >>>>>>> +
> >>>>>>> + switch (len) {
> >>>>>>> + case 1:
> >>>>>>> + break;
> >>>>>>> + case 2:
> >>>>>>> + data = cpu_to_le16(data);
> >>>>>>> + break;
> >>>>>>> + case 4:
> >>>>>>> + data = cpu_to_le32(data);
> >>>>>>> + break;
> >>>>>>> + case 8:
> >>>>>>> + data = cpu_to_le64(data);
> >>>>>>> + break;
> >>>>>>
> >>>>>> Why? Also, this is wrong. cpu_to_le64 convert between host endianness
> >>>>>> and LE. So if you're running this on an LE host, you won't swap the
> >>>>>> value and get a broken result.
> >>>>>>
> >>>>>> If you know that the value is always swapped, use bswapxx().
> >>>>>>
> >>>>>
> >>>>> Actually the code is right and required for a big endian host :-)
> >>>>> pcilg/pcistg provide access to the PCI config space which is defined
> >>>>> as PCI byte order (little endian). Since pci_host_config_read_common
> >>>>> does
> >>>>> already a le to cpu conversion we have to convert back to PCI byte
> >>>>> order.
> >>>>> Doing an unconditional swap would be a bug on a little endian host.
> >>>>
> >>>> Why would it be a bug? The value you end up writing is contents of a
> >>>> register and thus doesn't have endianness. So if QEMU was an LE process,
> >>>
> >>> No, the s390 guest executing pcilg instruction expects to receive config
> >>> space data
> >>> in PCI byte order.
> >>>
> >>>> the value of data would be identical as on a BE QEMU before your swab.
> >>>> After the swab, it would be bswap'ed on BE, but not LE. So LE hosts
> >>>> break.
> >>>>
> >>>
> >>> Again on BE endian host we do the swap because of
> >>> pci_host_config_read_common does
> >>> read the value and do a byte swap for that value, but we need PCI byte
> >>> order not BE here.
> >>>
> >>> On LE host pci_host_config_read_common does not do a byte swap so we do
> >>> not have to
> >>> convert back to PCI byte order.
> >>
> >> We maintain the PCI config space always in LE byte order in memory, that's
> >> why there is a bwap in its read function. The return result of the read
> >> function however is always the same, regardless of LE or BE host. If I do
> >> a read of size 4, I will always get 0x1, not 0x01000000 returned.
> >>
> >> So now you need to convert that 0x1 into a 0x01000000 manually here
> >> because some architect thought that registers have endianness (which they
> >> don't). But you need to do it always, even on an LE host, because the pci
> >> config space return value is identical on LE and BE.
> >>
> > so you tell me pci_host_config_read_common does not end up in
> > pci_default_read_config?
> >
> > uint32_t pci_default_read_config(PCIDevice *d,
> > uint32_t address, int len)
> > {
> > uint32_t val = 0;
> >
> > memcpy(&val, d->config + address, len);
> > return le32_to_cpu(val);
> > }
> >
> > What did I miss?
>
> That's exactly where you end up in - and it's there to convert from the
> PCI config space backing storage to a native number.
>
> Imagine you write 0x12345678 at offset 0. Because PCI config space is
> defined to be LE, in the PCI config space memory this gets stored as
>
> 78 56 34 12
>
> The reason we do the internal storage of the config space that way is
> that it's (in some PCI implementations) legal to access with single byte
> granularities. So you could do a pci_config_read(offset = 1) which
> should return 0x56.
>
> However, that means we completely nullify any effect of host endianness
> in the PCI config layer already. So if you do pci_config_write(offset =
> 0, size = 4, value = 0x12345678), the contents of d->config will always
> be identical, regardless of host endianness. The same holds true for
> pci_config_read(offset = 0, size = 4). It will always return 0x12345678.
>
I understood this from the beginning and I completely agree to this.
> In your code, you swab that value again. I assume there's a reason
> you're swapping it and that it's the way the architecture expects it
Yes, s390 pcilg architecture states:
Data in the PCI configuration space are treated
as being in little-endian byte ordering
> (mind to point me to the respective spec so I can verify?). But if the
> architecture expects it, then it expects it regardless of host
> endianness. The contents of regs[r1] should always be 0x78563412, no
> matter whether we're in an LE or a BE environment.
>
> Does that make sense now?
>
Absolutely lets make an example for qemu running on BE and LE
byte order config space backing pci_default_read_config pcilg (with
cpu_to_le)
BE 0x78563412 0x12345678 0x78563412
LE 0x78563412 0x78563412 0x78563412
So what is the problem with my code? Adding unconditional byte swap instead of
cpu_to_le in pcilg would break architecture for pcilg if qemu is running on LE
platform.
>
> Alex
>
- Re: [Qemu-devel] [PATCH 1/3] s390: Add PCI bus support, (continued)
- [Qemu-devel] [PATCH 3/3] kvm: extend kvm_irqchip_add_msi_route to work on s390, Frank Blaschka, 2014/11/10
- [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/10
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/10
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions,
Frank Blaschka <=
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Paolo Bonzini, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Alexander Graf, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Paolo Bonzini, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/12
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Peter Maydell, 2014/11/11
- Re: [Qemu-devel] [PATCH 2/3] s390: implement pci instructions, Frank Blaschka, 2014/11/11