[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 1/7] mips: Remove CONFIG_VT82C686 from non-Fulong con
From: |
Leon Alrae |
Subject: |
[Qemu-devel] [PULL 1/7] mips: Remove CONFIG_VT82C686 from non-Fulong configs |
Date: |
Fri, 7 Nov 2014 16:56:03 +0000 |
From: "Maciej W. Rozycki" <address@hidden>
Fix the regression introduced with commit
47934d0aadc075b05ce2d9e8a44fa6a46edd1afa [hw: move ISA bridges and
devices to hw/isa/, configure with default-configs/], by removing
CONFIG_VT82C686 from configurations that previously did not enable it.
That southbridge is only available on Fulong platforms (CONFIG_FULONG)
that are exclusively little-endian, 64-bit MIPS. Previously vt82c686.o
was pulled explicitly with obj-$(CONFIG_FULONG).
Signed-off-by: Maciej W. Rozycki <address@hidden>
Reviewed-by: Leon Alrae <address@hidden>
Signed-off-by: Leon Alrae <address@hidden>
---
default-configs/mips-softmmu.mak | 1 -
default-configs/mips64-softmmu.mak | 1 -
default-configs/mipsel-softmmu.mak | 1 -
3 files changed, 3 deletions(-)
diff --git a/default-configs/mips-softmmu.mak b/default-configs/mips-softmmu.mak
index 71177ef..2a80b04 100644
--- a/default-configs/mips-softmmu.mak
+++ b/default-configs/mips-softmmu.mak
@@ -32,6 +32,5 @@ CONFIG_G364FB=y
CONFIG_I8259=y
CONFIG_JAZZ_LED=y
CONFIG_MC146818RTC=y
-CONFIG_VT82C686=y
CONFIG_ISA_TESTDEV=y
CONFIG_EMPTY_SLOT=y
diff --git a/default-configs/mips64-softmmu.mak
b/default-configs/mips64-softmmu.mak
index 617301b..f1f933b 100644
--- a/default-configs/mips64-softmmu.mak
+++ b/default-configs/mips64-softmmu.mak
@@ -32,6 +32,5 @@ CONFIG_G364FB=y
CONFIG_I8259=y
CONFIG_JAZZ_LED=y
CONFIG_MC146818RTC=y
-CONFIG_VT82C686=y
CONFIG_ISA_TESTDEV=y
CONFIG_EMPTY_SLOT=y
diff --git a/default-configs/mipsel-softmmu.mak
b/default-configs/mipsel-softmmu.mak
index 532a9ae..7708185 100644
--- a/default-configs/mipsel-softmmu.mak
+++ b/default-configs/mipsel-softmmu.mak
@@ -32,6 +32,5 @@ CONFIG_G364FB=y
CONFIG_I8259=y
CONFIG_JAZZ_LED=y
CONFIG_MC146818RTC=y
-CONFIG_VT82C686=y
CONFIG_ISA_TESTDEV=y
CONFIG_EMPTY_SLOT=y
--
2.1.0
- [Qemu-devel] [PULL 0/7] target-mips queue, Leon Alrae, 2014/11/07
- [Qemu-devel] [PULL 1/7] mips: Remove CONFIG_VT82C686 from non-Fulong configs,
Leon Alrae <=
- [Qemu-devel] [PULL 2/7] mips: Respect CP0.Status.CU1 for microMIPS FP branches, Leon Alrae, 2014/11/07
- [Qemu-devel] [PULL 3/7] mips: Add macros for CP0.Config3 and CP0.Config4 bits, Leon Alrae, 2014/11/07
- [Qemu-devel] [PULL 4/7] mips: Set the CP0.Config3.DSP and CP0.Config3.DSP2P bits, Leon Alrae, 2014/11/07
- [Qemu-devel] [PULL 7/7] target-mips: fix multiple TCG registers covering same data, Leon Alrae, 2014/11/07
- [Qemu-devel] [PULL 6/7] mips: Ensure PC update with MTC0 single-stepping, Leon Alrae, 2014/11/07
- [Qemu-devel] [PULL 5/7] target-mips: fix for missing delay slot in BC1EQZ and BC1NEZ, Leon Alrae, 2014/11/07
- Re: [Qemu-devel] [PULL 0/7] target-mips queue, Peter Maydell, 2014/11/10