[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform su
From: |
Alexander Graf |
Subject: |
Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support |
Date: |
Wed, 05 Nov 2014 11:29:45 +0100 |
User-agent: |
Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:31.0) Gecko/20100101 Thunderbird/31.2.0 |
On 31.10.14 15:05, Eric Auger wrote:
> Minimal VFIO platform implementation supporting
> - register space user mapping,
> - IRQ assignment based on eventfds handled on qemu side.
>
> irqfd kernel acceleration comes in a subsequent patch.
>
> Signed-off-by: Kim Phillips <address@hidden>
> Signed-off-by: Eric Auger <address@hidden>
>
> ---
> v6 -> v7:
> - compat is not exposed anymore as a user option. Rationale is
> the vfio device became abstract and a specialization is needed
> anyway. The derived device must set the compat string.
> - in v6 vfio_start_irq_injection was exposed in vfio-platform.h.
> A new function dubbed vfio_register_irq_starter replaces it. It
> registers a machine init done notifier that programs & starts
> all dynamic VFIO device IRQs. This function is supposed to be
> called by the machine file. A set of static helper routines are
> added too. It must be called before the creation of the platform
> bus device.
>
> v5 -> v6:
> - vfio_device property renamed into host property
> - correct error handling of VFIO_DEVICE_GET_IRQ_INFO ioctl
> and remove PCI related comment
> - remove declaration of vfio_setup_irqfd and irqfd_allowed
> property.Both belong to next patch (irqfd)
> - remove declaration of vfio_intp_interrupt in vfio-platform.h
> - functions that can be static get this characteristic
> - remove declarations of vfio_region_ops, vfio_memory_listener,
> group_list, vfio_address_spaces. All are moved to vfio-common.h
> - remove vfio_put_device declaration and definition
> - print_regions removed. code moved into vfio_populate_regions
> - replace DPRINTF by trace events
> - new helper routine to set the trigger eventfd
> - dissociate intp init from the injection enablement:
> vfio_enable_intp renamed into vfio_init_intp and new function
> named vfio_start_eventfd_injection
> - injection start moved to vfio_start_irq_injection (not anymore
> in vfio_populate_interrupt)
> - new start_irq_fn field in VFIOPlatformDevice corresponding to
> the function that will be used for starting injection
> - user handled eventfd:
> x add mutex to protect IRQ state & list manipulation,
> x correct misleading comment in vfio_intp_interrupt.
> x Fix bugs thanks to fake interrupt modality
> - VFIOPlatformDeviceClass becomes abstract
> - add error_setg in vfio_platform_realize
>
> v4 -> v5:
> - vfio-plaform.h included first
> - cleanup error handling in *populate*, vfio_get_device,
> vfio_enable_intp
> - vfio_put_device not called anymore
> - add some includes to follow vfio policy
>
> v3 -> v4:
> [Eric Auger]
> - merge of "vfio: Add initial IRQ support in platform device"
> to get a full functional patch although perfs are limited.
> - removal of unrealize function since I currently understand
> it is only used with device hot-plug feature.
>
> v2 -> v3:
> [Eric Auger]
> - further factorization between PCI and platform (VFIORegion,
> VFIODevice). same level of functionality.
>
> <= v2:
> [Kim Philipps]
> - Initial Creation of the device supporting register space mapping
> ---
> hw/vfio/Makefile.objs | 1 +
> hw/vfio/platform.c | 672
> ++++++++++++++++++++++++++++++++++++++++
> include/hw/vfio/vfio-common.h | 1 +
> include/hw/vfio/vfio-platform.h | 87 ++++++
> trace-events | 12 +
> 5 files changed, 773 insertions(+)
> create mode 100644 hw/vfio/platform.c
> create mode 100644 include/hw/vfio/vfio-platform.h
>
> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
> index e31f30e..c5c76fe 100644
> --- a/hw/vfio/Makefile.objs
> +++ b/hw/vfio/Makefile.objs
> @@ -1,4 +1,5 @@
> ifeq ($(CONFIG_LINUX), y)
> obj-$(CONFIG_SOFTMMU) += common.o
> obj-$(CONFIG_PCI) += pci.o
> +obj-$(CONFIG_SOFTMMU) += platform.o
> endif
> diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
> new file mode 100644
> index 0000000..9f66610
> --- /dev/null
> +++ b/hw/vfio/platform.c
> @@ -0,0 +1,672 @@
> +/*
> + * vfio based device assignment support - platform devices
> + *
> + * Copyright Linaro Limited, 2014
> + *
> + * Authors:
> + * Kim Phillips <address@hidden>
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2. See
> + * the COPYING file in the top-level directory.
> + *
> + * Based on vfio based PCI device assignment support:
> + * Copyright Red Hat, Inc. 2012
> + */
> +
> +#include <linux/vfio.h>
> +#include <sys/ioctl.h>
> +
> +#include "hw/vfio/vfio-platform.h"
> +#include "qemu/error-report.h"
> +#include "qemu/range.h"
> +#include "sysemu/sysemu.h"
> +#include "exec/memory.h"
> +#include "qemu/queue.h"
> +#include "hw/sysbus.h"
> +#include "trace.h"
> +#include "hw/platform-bus.h"
> +
> +static void vfio_intp_interrupt(VFIOINTp *intp);
> +typedef void (*eventfd_user_side_handler_t)(VFIOINTp *intp);
> +static int vfio_set_trigger_eventfd(VFIOINTp *intp,
> + eventfd_user_side_handler_t handler);
> +
> +/*
> + * Functions only used when eventfd are handled on user-side
> + * ie. without irqfd
> + */
> +
> +/**
> + * vfio_platform_eoi - IRQ completion routine
> + * @vbasedev: the VFIO device
> + *
> + * de-asserts the active virtual IRQ and unmask the physical IRQ
> + * (masked by the VFIO driver). Handle pending IRQs if any.
> + * eoi function is called on the first access to any MMIO region
> + * after an IRQ was triggered. It is assumed this access corresponds
> + * to the IRQ status register reset. With such a mechanism, a single
> + * IRQ can be handled at a time since there is no way to know which
> + * IRQ was completed by the guest (we would need additional details
> + * about the IRQ status register mask)
> + */
> +static void vfio_platform_eoi(VFIODevice *vbasedev)
> +{
> + VFIOINTp *intp;
> + VFIOPlatformDevice *vdev =
> + container_of(vbasedev, VFIOPlatformDevice, vbasedev);
> +
> + qemu_mutex_lock(&vdev->intp_mutex);
> + QLIST_FOREACH(intp, &vdev->intp_list, next) {
> + if (intp->state == VFIO_IRQ_ACTIVE) {
> + trace_vfio_platform_eoi(intp->pin,
> + event_notifier_get_fd(&intp->interrupt));
> + intp->state = VFIO_IRQ_INACTIVE;
> +
> + /* deassert the virtual IRQ and unmask physical one */
> + qemu_set_irq(intp->qemuirq, 0);
> + vfio_unmask_irqindex(vbasedev, intp->pin);
> +
> + /* a single IRQ can be active at a time */
> + break;
> + }
> + }
> + /* in case there are pending IRQs, handle them one at a time */
> + if (!QSIMPLEQ_EMPTY(&vdev->pending_intp_queue)) {
> + intp = QSIMPLEQ_FIRST(&vdev->pending_intp_queue);
> + trace_vfio_platform_eoi_handle_pending(intp->pin);
> + qemu_mutex_unlock(&vdev->intp_mutex);
> + vfio_intp_interrupt(intp);
> + qemu_mutex_lock(&vdev->intp_mutex);
> + QSIMPLEQ_REMOVE_HEAD(&vdev->pending_intp_queue, pqnext);
> + qemu_mutex_unlock(&vdev->intp_mutex);
> + } else {
> + qemu_mutex_unlock(&vdev->intp_mutex);
> + }
> +}
> +
> +/**
> + * vfio_mmap_set_enabled - enable/disable the fast path mode
> + * @vdev: the VFIO platform device
> + * @enabled: the target mmap state
> + *
> + * true ~ fast path = MMIO region is mmaped (no KVM TRAP)
> + * false ~ slow path = MMIO region is trapped and region callbacks
> + * are called slow path enables to trap the IRQ status register
> + * guest reset
> +*/
> +
> +static void vfio_mmap_set_enabled(VFIOPlatformDevice *vdev, bool enabled)
> +{
> + VFIORegion *region;
> + int i;
> +
> + trace_vfio_platform_mmap_set_enabled(enabled);
> +
> + for (i = 0; i < vdev->vbasedev.num_regions; i++) {
> + region = vdev->regions[i];
> +
> + /* register space is unmapped to trap EOI */
> + memory_region_set_enabled(®ion->mmap_mem, enabled);
> + }
> +}
> +
> +/**
> + * vfio_intp_mmap_enable - timer function, restores the fast path
> + * if there is no more active IRQ
> + * @opaque: actually points to the VFIO platform device
> + *
> + * Called on mmap timer timout, this function checks whether the
> + * IRQ is still active and in the negative restores the fast path.
> + * by construction a single eventfd is handled at a time.
> + * if the IRQ is still active, the timer is restarted.
> + */
> +static void vfio_intp_mmap_enable(void *opaque)
> +{
> + VFIOINTp *tmp;
> + VFIOPlatformDevice *vdev = (VFIOPlatformDevice *)opaque;
> +
> + qemu_mutex_lock(&vdev->intp_mutex);
> + QLIST_FOREACH(tmp, &vdev->intp_list, next) {
> + if (tmp->state == VFIO_IRQ_ACTIVE) {
> + trace_vfio_platform_intp_mmap_enable(tmp->pin);
> + /* re-program the timer to check active status later */
> + timer_mod(vdev->mmap_timer,
> + qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) +
> + vdev->mmap_timeout);
> + qemu_mutex_unlock(&vdev->intp_mutex);
> + return;
> + }
> + }
> + vfio_mmap_set_enabled(vdev, true);
> + qemu_mutex_unlock(&vdev->intp_mutex);
> +}
> +
> +/**
> + * vfio_intp_interrupt - The user-side eventfd handler
> + * @opaque: opaque pointer which in practice is the VFIOINTp*
> + *
> + * the function can be entered
> + * - in event handler context: this IRQ is inactive
> + * in that case, the vIRQ is injected into the guest if there
> + * is no other active or pending IRQ.
> + * - in IOhandler context: this IRQ is pending.
> + * there is no ACTIVE IRQ
> + */
> +static void vfio_intp_interrupt(VFIOINTp *intp)
> +{
> + int ret;
> + VFIOINTp *tmp;
> + VFIOPlatformDevice *vdev = intp->vdev;
> + bool delay_handling = false;
> +
> + qemu_mutex_lock(&vdev->intp_mutex);
> + if (intp->state == VFIO_IRQ_INACTIVE) {
> + QLIST_FOREACH(tmp, &vdev->intp_list, next) {
> + if (tmp->state == VFIO_IRQ_ACTIVE ||
> + tmp->state == VFIO_IRQ_PENDING) {
> + delay_handling = true;
> + break;
> + }
> + }
> + }
> + if (delay_handling) {
> + /*
> + * the new IRQ gets a pending status and is pushed in
> + * the pending queue
> + */
> + intp->state = VFIO_IRQ_PENDING;
> + trace_vfio_intp_interrupt_set_pending(intp->pin);
> + QSIMPLEQ_INSERT_TAIL(&vdev->pending_intp_queue,
> + intp, pqnext);
> + ret = event_notifier_test_and_clear(&intp->interrupt);
> + qemu_mutex_unlock(&vdev->intp_mutex);
> + return;
> + }
> +
> + /* no active IRQ, the new IRQ can be forwarded to the guest */
> + trace_vfio_platform_intp_interrupt(intp->pin,
> + event_notifier_get_fd(&intp->interrupt));
> +
> + if (intp->state == VFIO_IRQ_INACTIVE) {
> + ret = event_notifier_test_and_clear(&intp->interrupt);
> + if (!ret) {
> + error_report("Error when clearing fd=%d (ret = %d)\n",
> + event_notifier_get_fd(&intp->interrupt), ret);
> + }
> + } /* else this is a pending IRQ that moves to ACTIVE state */
> +
> + intp->state = VFIO_IRQ_ACTIVE;
> +
> + /* sets slow path */
> + vfio_mmap_set_enabled(vdev, false);
> +
> + /* trigger the virtual IRQ */
> + qemu_set_irq(intp->qemuirq, 1);
> +
> + /* schedule the mmap timer which will restore mmap path after EOI*/
> + if (vdev->mmap_timeout) {
> + timer_mod(vdev->mmap_timer,
> + qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) +
> + vdev->mmap_timeout);
> + }
> + qemu_mutex_unlock(&vdev->intp_mutex);
> +}
> +
> +/**
> + * vfio_start_eventfd_injection - starts the virtual IRQ injection using
> + * user-side handled eventfds
> + * @intp: the IRQ struct pointer
> + */
> +
> +static int vfio_start_eventfd_injection(VFIOINTp *intp)
> +{
> + int ret;
> + VFIODevice *vbasedev = &intp->vdev->vbasedev;
> +
> + vfio_mask_irqindex(vbasedev, intp->pin);
> +
> + ret = vfio_set_trigger_eventfd(intp, vfio_intp_interrupt);
> + if (ret) {
> + error_report("vfio: Error: Failed to pass IRQ fd to the driver: %m");
> + vfio_unmask_irqindex(vbasedev, intp->pin);
> + return ret;
> + }
> + vfio_unmask_irqindex(vbasedev, intp->pin);
> + return 0;
> +}
> +
> +/*
> + * Functions used whatever the injection method
> + */
> +
> +/**
> + * vfio_set_trigger_eventfd - set VFIO eventfd handling
> + * ie. program the VFIO driver to associates a given IRQ index
> + * with a fd handler
> + *
> + * @intp: IRQ struct pointer
> + * @handler: handler to be called on eventfd trigger
> + */
> +static int vfio_set_trigger_eventfd(VFIOINTp *intp,
> + eventfd_user_side_handler_t handler)
> +{
> + VFIODevice *vbasedev = &intp->vdev->vbasedev;
> + struct vfio_irq_set *irq_set;
> + int argsz, ret;
> + int32_t *pfd;
> +
> + argsz = sizeof(*irq_set) + sizeof(*pfd);
> + irq_set = g_malloc0(argsz);
> + irq_set->argsz = argsz;
> + irq_set->flags = VFIO_IRQ_SET_DATA_EVENTFD | VFIO_IRQ_SET_ACTION_TRIGGER;
> + irq_set->index = intp->pin;
> + irq_set->start = 0;
> + irq_set->count = 1;
> + pfd = (int32_t *)&irq_set->data;
> + *pfd = event_notifier_get_fd(&intp->interrupt);
> + qemu_set_fd_handler(*pfd, (IOHandler *)handler, NULL, intp);
> + ret = ioctl(vbasedev->fd, VFIO_DEVICE_SET_IRQS, irq_set);
> + g_free(irq_set);
> + if (ret < 0) {
> + error_report("vfio: Failed to set trigger eventfd: %m");
> + qemu_set_fd_handler(*pfd, NULL, NULL, NULL);
> + }
> + return ret;
> +}
> +
> +/* not implemented yet */
> +static bool vfio_platform_compute_needs_reset(VFIODevice *vdev)
> +{
> +return false;
> +}
> +
> +/* not implemented yet */
> +static int vfio_platform_hot_reset_multi(VFIODevice *vdev)
> +{
> +return 0;
> +}
> +
> +/**
> + * vfio_init_intp - allocate, initialize the IRQ struct pointer
> + * and add it into the list of IRQ
> + * @vbasedev: the VFIO device
> + * @index: VFIO device IRQ index
> + */
> +static VFIOINTp *vfio_init_intp(VFIODevice *vbasedev, unsigned int index)
> +{
> + int ret;
> + VFIOPlatformDevice *vdev =
> + container_of(vbasedev, VFIOPlatformDevice, vbasedev);
> + SysBusDevice *sbdev = SYS_BUS_DEVICE(vdev);
> + VFIOINTp *intp;
> +
> + /* allocate and populate a new VFIOINTp structure put in a queue list */
> + intp = g_malloc0(sizeof(*intp));
> + intp->vdev = vdev;
> + intp->pin = index;
> + intp->state = VFIO_IRQ_INACTIVE;
> + sysbus_init_irq(sbdev, &intp->qemuirq);
> +
> + /* Get an eventfd for trigger */
> + ret = event_notifier_init(&intp->interrupt, 0);
> + if (ret) {
> + g_free(intp);
> + error_report("vfio: Error: trigger event_notifier_init failed ");
> + return NULL;
> + }
> +
> + /* store the new intp in qlist */
> + QLIST_INSERT_HEAD(&vdev->intp_list, intp, next);
> + return intp;
> +}
> +
> +/**
> + * vfio_populate_device - initialize MMIO region and IRQ
> + * @vbasedev: the VFIO device
> + *
> + * query the VFIO device for exposed MMIO regions and IRQ and
> + * populate the associated fields in the device struct
> + */
> +static int vfio_populate_device(VFIODevice *vbasedev)
> +{
> + struct vfio_irq_info irq = { .argsz = sizeof(irq) };
> + struct vfio_region_info reg_info = { .argsz = sizeof(reg_info) };
> + VFIOINTp *intp;
> + int i, ret = 0;
> + VFIOPlatformDevice *vdev =
> + container_of(vbasedev, VFIOPlatformDevice, vbasedev);
> +
> + vdev->regions = g_malloc0(sizeof(VFIORegion *) * vbasedev->num_regions);
> +
> + for (i = 0; i < vbasedev->num_regions; i++) {
> + vdev->regions[i] = g_malloc0(sizeof(VFIORegion));
> + reg_info.index = i;
> + ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_REGION_INFO, ®_info);
> + if (ret) {
> + error_report("vfio: Error getting region %d info: %m", i);
> + goto error;
> + }
> + vdev->regions[i]->flags = reg_info.flags;
> + vdev->regions[i]->size = reg_info.size;
> + vdev->regions[i]->fd_offset = reg_info.offset;
> + vdev->regions[i]->nr = i;
> + vdev->regions[i]->vbasedev = vbasedev;
> +
> + trace_vfio_platform_populate_regions(vdev->regions[i]->nr,
> + (unsigned long)vdev->regions[i]->flags,
> + (unsigned long)vdev->regions[i]->size,
> + vdev->regions[i]->vbasedev->fd,
> + (unsigned long)vdev->regions[i]->fd_offset);
> + }
> +
> + vdev->mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
> + vfio_intp_mmap_enable, vdev);
> +
> + QSIMPLEQ_INIT(&vdev->pending_intp_queue);
> +
> + for (i = 0; i < vbasedev->num_irqs; i++) {
> + irq.index = i;
> +
> + ret = ioctl(vbasedev->fd, VFIO_DEVICE_GET_IRQ_INFO, &irq);
> + if (ret) {
> + error_printf("vfio: error getting device %s irq info",
> + vbasedev->name);
> + return ret;
> + } else {
> + trace_vfio_platform_populate_interrupts(irq.index,
> + irq.count,
> + irq.flags);
> + intp = vfio_init_intp(vbasedev, irq.index);
> + if (!intp) {
> + error_report("vfio: Error installing IRQ %d up", i);
> + return ret;
> + }
> + }
> + }
> + return 0;
> +error:
> + return ret;
> +}
> +
> +/*
> + * vfio_start_irq_injection - associates a virtual irq to a
> + * VFIO IRQ index and start the injection of this IRQ
> + * @s: SysBus Device
> + * @index: VFIO IRQ index
> + * @virq: the virtual IRQ number, aka gsi
> + *
> + * this function is called when the device tree is built
> + */
> +static void vfio_start_irq_injection(SysBusDevice *s, int index, int virq)
> +{
> + VFIOPlatformDevice *vdev = container_of(s, VFIOPlatformDevice, sbdev);
> + VFIOINTp *intp;
> +
> + QLIST_FOREACH(intp, &vdev->intp_list, next) {
> + if (intp->pin == index) {
> + intp->virtualID = virq;
> + vdev->start_irq_fn(intp);
> + }
> + }
> +}
> +
> +/* specialized functions ofr VFIO Platform devices */
> +static VFIODeviceOps vfio_platform_ops = {
> + .vfio_compute_needs_reset = vfio_platform_compute_needs_reset,
> + .vfio_hot_reset_multi = vfio_platform_hot_reset_multi,
> + .vfio_eoi = vfio_platform_eoi,
> + .vfio_populate_device = vfio_populate_device,
> +};
> +
> +/**
> + * vfio_base_device_init - implements some of the VFIO mechanics
> + * @vbasedev: the VFIO device
> + *
> + * retrieves the group the device belongs to and get the device fd
> + * returns the VFIO device fd
> + * precondition: the device name must be initialized
> + */
> +static int vfio_base_device_init(VFIODevice *vbasedev)
> +{
> + VFIOGroup *group;
> + VFIODevice *vbasedev_iter;
> + char path[PATH_MAX], iommu_group_path[PATH_MAX], *group_name;
> + ssize_t len;
> + struct stat st;
> + int groupid;
> + int ret;
> +
> + /* name must be set prior to the call */
> + if (!vbasedev->name) {
> + return -EINVAL;
> + }
> +
> + /* Check that the host device exists */
> + snprintf(path, sizeof(path), "/sys/bus/platform/devices/%s/",
> + vbasedev->name);
> +
> + if (stat(path, &st) < 0) {
> + error_report("vfio: error: no such host device: %s", path);
> + return -errno;
> + }
> +
> + strncat(path, "iommu_group", sizeof(path) - strlen(path) - 1);
> + len = readlink(path, iommu_group_path, sizeof(path));
> + if (len <= 0 || len >= sizeof(path)) {
> + error_report("vfio: error no iommu_group for device");
> + return len < 0 ? -errno : ENAMETOOLONG;
> + }
> +
> + iommu_group_path[len] = 0;
> + group_name = basename(iommu_group_path);
> +
> + if (sscanf(group_name, "%d", &groupid) != 1) {
> + error_report("vfio: error reading %s: %m", path);
> + return -errno;
> + }
> +
> + trace_vfio_platform_base_device_init(vbasedev->name, groupid);
> +
> + group = vfio_get_group(groupid, &address_space_memory);
> + if (!group) {
> + error_report("vfio: failed to get group %d", groupid);
> + return -ENOENT;
> + }
> +
> + snprintf(path, sizeof(path), "%s", vbasedev->name);
> +
> + QLIST_FOREACH(vbasedev_iter, &group->device_list, next) {
> + if (strcmp(vbasedev_iter->name, vbasedev->name) == 0) {
> + error_report("vfio: error: device %s is already attached", path);
> + vfio_put_group(group);
> + return -EBUSY;
> + }
> + }
> + ret = vfio_get_device(group, path, vbasedev);
> + if (ret) {
> + error_report("vfio: failed to get device %s", path);
> + vfio_put_group(group);
> + }
> + return ret;
> +}
> +
> +/**
> + * vfio_map_region - initialize the 2 mr (mmapped on ops) for a
> + * given index
> + * @vdev: the VFIO platform device
> + * @nr: the index of the region
> + *
> + * init the top memory region and the mmapped memroy region beneath
> + * VFIOPlatformDevice is used since VFIODevice is not a QOM Object
> + * and could not be passed to memory region functions
> +*/
> +static void vfio_map_region(VFIOPlatformDevice *vdev, int nr)
> +{
> + VFIORegion *region = vdev->regions[nr];
> + unsigned size = region->size;
> + char name[64];
> +
> + if (!size) {
> + return;
> + }
> +
> + snprintf(name, sizeof(name), "VFIO %s region %d",
> + vdev->vbasedev.name, nr);
> +
> + /* A "slow" read/write mapping underlies all regions */
> + memory_region_init_io(®ion->mem, OBJECT(vdev), &vfio_region_ops,
> + region, name, size);
> +
> + strncat(name, " mmap", sizeof(name) - strlen(name) - 1);
> +
> + if (vfio_mmap_region(OBJECT(vdev), region, ®ion->mem,
> + ®ion->mmap_mem, ®ion->mmap, size, 0, name)) {
> + error_report("%s unsupported. Performance may be slow", name);
> + }
> +}
> +
> +/**
> + * vfio_platform_realize - the device realize function
> + * @dev: device state pointer
> + * @errp: error
> + *
> + * initialize the device, its memory regions and IRQ structures
> + * IRQ are started separately
> + */
> +static void vfio_platform_realize(DeviceState *dev, Error **errp)
> +{
> + VFIOPlatformDevice *vdev = VFIO_PLATFORM_DEVICE(dev);
> + SysBusDevice *sbdev = SYS_BUS_DEVICE(dev);
> + VFIODevice *vbasedev = &vdev->vbasedev;
> + int i, ret;
> +
> + vbasedev->type = VFIO_DEVICE_TYPE_PLATFORM;
> + vbasedev->ops = &vfio_platform_ops;
> + vdev->start_irq_fn = vfio_start_eventfd_injection;
> +
> + trace_vfio_platform_realize(vbasedev->name, vdev->compat);
> +
> + ret = vfio_base_device_init(vbasedev);
> + if (ret) {
> + error_setg(errp, "vfio: vfio_base_device_init failed for %s",
> + vbasedev->name);
> + return;
> + }
> +
> + for (i = 0; i < vbasedev->num_regions; i++) {
> + vfio_map_region(vdev, i);
> + sysbus_init_mmio(sbdev, &vdev->regions[i]->mem);
> + }
> +}
> +
> +/*
> + * Mechanics to program/start irq injection on machine init done notifier:
> + * this is needed since at finalize time, the device IRQ are not yet
> + * bound to the platform bus IRQ. It is assumed here dynamic instantiation
> + * always is used. Binding to the platform bus IRQ happens on a machine
> + * init done notifier registered by the machine file. After its execution
> + * we execute a new notifier that actually starts the injection. When using
> + * irqfd, programming the injection consists in associating eventfds to
> + * GSI number,ie. virtual IRQ number
> + */
> +
> +typedef struct VfioIrqStarterNotifierParams {
> + unsigned int platform_bus_first_irq;
> + Notifier notifier;
> +} VfioIrqStarterNotifierParams;
> +
> +typedef struct VfioIrqStartParams {
> + PlatformBusDevice *pbus;
> + int platform_bus_first_irq;
> +} VfioIrqStartParams;
> +
> +/* Start injection of IRQ for a specific VFIO device */
> +static int vfio_irq_starter(SysBusDevice *sbdev, void *opaque)
> +{
> + int i;
> + VfioIrqStartParams *p = opaque;
> + VFIOPlatformDevice *vdev;
> + VFIODevice *vbasedev;
> + uint64_t irq_number;
> + PlatformBusDevice *pbus = p->pbus;
> + int platform_bus_first_irq = p->platform_bus_first_irq;
> +
> + if (object_dynamic_cast(OBJECT(sbdev), TYPE_VFIO_PLATFORM)) {
> + vdev = VFIO_PLATFORM_DEVICE(sbdev);
> + vbasedev = &vdev->vbasedev;
> + for (i = 0; i < vbasedev->num_irqs; i++) {
> + irq_number = platform_bus_get_irqn(pbus, sbdev, i)
> + + platform_bus_first_irq;
> + vfio_start_irq_injection(sbdev, i, irq_number);
> + }
> + }
> + return 0;
> +}
> +
> +/* loop on all VFIO platform devices and start their IRQ injection */
> +static void vfio_irq_starter_notify(Notifier *notifier, void *data)
> +{
> + VfioIrqStarterNotifierParams *p =
> + container_of(notifier, VfioIrqStarterNotifierParams, notifier);
> + DeviceState *dev =
> + qdev_find_recursive(sysbus_get_default(), TYPE_PLATFORM_BUS_DEVICE);
> + PlatformBusDevice *pbus = PLATFORM_BUS_DEVICE(dev);
> +
> + if (pbus->done_gathering) {
> + VfioIrqStartParams data = {
> + .pbus = pbus,
> + .platform_bus_first_irq = p->platform_bus_first_irq,
> + };
> +
> + foreach_dynamic_sysbus_device(vfio_irq_starter, &data);
> + }
> +}
> +
> +/* registers the machine init done notifier that will start VFIO IRQ */
> +void vfio_register_irq_starter(int platform_bus_first_irq)
> +{
> + VfioIrqStarterNotifierParams *p = g_new(VfioIrqStarterNotifierParams, 1);
> +
> + p->platform_bus_first_irq = platform_bus_first_irq;
> + p->notifier.notify = vfio_irq_starter_notify;
> + qemu_add_machine_init_done_notifier(&p->notifier);
Could you add a notifier for each device instead? Then the notifier
would be part of the vfio device struct and not some dangling random
pointer :).
Of course instead of foreach_dynamic_sysbus_device() you would directly
know the device you're dealing with and only handle a single device per
notifier.
Alex
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support,
Alexander Graf <=
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Eric Auger, 2014/11/05
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Eric Auger, 2014/11/26
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Alexander Graf, 2014/11/26
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Eric Auger, 2014/11/26
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Alexander Graf, 2014/11/26
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Eric Auger, 2014/11/26
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Eric Auger, 2014/11/27
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Alexander Graf, 2014/11/27
- Re: [Qemu-devel] [PATCH v7 09/16] hw/vfio/platform: add vfio-platform support, Eric Auger, 2014/11/27