[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v5 6/7] stm32f205: Add the stm32f205 SoC
From: |
Alistair Francis |
Subject: |
Re: [Qemu-devel] [PATCH v5 6/7] stm32f205: Add the stm32f205 SoC |
Date: |
Mon, 20 Oct 2014 22:30:40 +1000 |
On Mon, Oct 20, 2014 at 5:47 PM, Peter Crosthwaite
<address@hidden> wrote:
> On Thu, Oct 16, 2014 at 10:54 PM, Alistair Francis <address@hidden> wrote:
>> This patch adds the stm32f205 SoC. This will be used by the
>> Netduino 2 to create a machine.
>>
>> Signed-off-by: Alistair Francis <address@hidden>
>> ---
>> default-configs/arm-softmmu.mak | 1 +
>> hw/arm/Makefile.objs | 1 +
>> hw/arm/stm32f205_soc.c | 157
>> ++++++++++++++++++++++++++++++++++++++++
>> include/hw/arm/stm32f205_soc.h | 69 ++++++++++++++++++
>> 4 files changed, 228 insertions(+)
>> create mode 100644 hw/arm/stm32f205_soc.c
>> create mode 100644 include/hw/arm/stm32f205_soc.h
>>
>> diff --git a/default-configs/arm-softmmu.mak
>> b/default-configs/arm-softmmu.mak
>> index a2ea8f7..8068100 100644
>> --- a/default-configs/arm-softmmu.mak
>> +++ b/default-configs/arm-softmmu.mak
>> @@ -81,6 +81,7 @@ CONFIG_ZYNQ=y
>> CONFIG_STM32F205_TIMER=y
>> CONFIG_STM32F205_USART=y
>> CONFIG_STM32F205_SYSCFG=y
>> +CONFIG_STM32F205_SOC=y
>>
>> CONFIG_VERSATILE_PCI=y
>> CONFIG_VERSATILE_I2C=y
>> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
>> index 6088e53..9769317 100644
>> --- a/hw/arm/Makefile.objs
>> +++ b/hw/arm/Makefile.objs
>> @@ -8,3 +8,4 @@ obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o
>> pxa2xx_pic.o
>> obj-$(CONFIG_DIGIC) += digic.o
>> obj-y += omap1.o omap2.o strongarm.o
>> obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
>> +obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
>> diff --git a/hw/arm/stm32f205_soc.c b/hw/arm/stm32f205_soc.c
>> new file mode 100644
>> index 0000000..bd9514e
>> --- /dev/null
>> +++ b/hw/arm/stm32f205_soc.c
>> @@ -0,0 +1,157 @@
>> +/*
>> + * STM32F205 SoC
>> + *
>> + * Copyright (c) 2014 Alistair Francis <address@hidden>
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> copy
>> + * of this software and associated documentation files (the "Software"), to
>> deal
>> + * in the Software without restriction, including without limitation the
>> rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included
>> in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
>> OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#include "hw/arm/stm32f205_soc.h"
>> +
>> +/* At the moment only Timer 2 to 5 are modelled */
>> +static const uint32_t timer_addr[] = { 0x40000000, 0x40000400,
>> + 0x40000800, 0x40000C00 };
>> +static const uint32_t usart_addr[] = { 0x40011000, 0x40004400,
>> + 0x40004800, 0x40004C00, 0x40005000, 0x40011400 };
>> +
>
> You have 6 addresses for USART ...
>
>> +static const int timer_irq[] = {28, 29, 30, 50};
>> +static const int usart_irq[] = {37, 38, 39, 52, 53, 71, 82, 83};
>> +
>
> ... but 8 IRQS and the loop below uses only 5 values. What's the system
> exactly?
These must be left over from the Netduino Plus 2. I think it's just
the first five, but I'll
double check and fix in a respin
>
>> +static void stm32f205_soc_initfn(Object *obj)
>> +{
>> + STM32F205State *s = STM32F205_SOC(obj);
>> + int i;
>> +
>> + object_initialize(&s->syscfg, sizeof(s->syscfg), TYPE_STM32F205_SYSCFG);
>> + qdev_set_parent_bus(DEVICE(&s->syscfg), sysbus_get_default());
>> +
>> + for (i = 0; i < 5; i++) {
>> + object_initialize(&s->usart[i], sizeof(s->usart[i]),
>> + TYPE_STM32F205_USART);
>> + qdev_set_parent_bus(DEVICE(&s->usart[i]), sysbus_get_default());
>> + }
>> +
>> + for (i = 0; i < 4; i++) {
>> + object_initialize(&s->timer[i], sizeof(s->timer[i]),
>> + TYPE_STM32F205_TIMER);
>> + qdev_set_parent_bus(DEVICE(&s->timer[i]), sysbus_get_default());
>> + }
>> +}
>> +
>> +static void stm32f205_soc_realize(DeviceState *dev_soc, Error **errp)
>> +{
>> + STM32F205State *s = STM32F205_SOC(dev_soc);
>> + DeviceState *syscfgdev, *usartdev, *timerdev;
>> + SysBusDevice *syscfgbusdev, *usartbusdev, *timerbusdev;
>> + qemu_irq *pic;;
>
> stray ;
Will fix
>
>> + Error *err = NULL;
>> + int i;
>> +
>> + MemoryRegion *system_memory = get_system_memory();
>> + MemoryRegion *sram = g_new(MemoryRegion, 1);
>> + MemoryRegion *flash = g_new(MemoryRegion, 1);
>> + MemoryRegion *flash_alias = g_new(MemoryRegion, 1);
>> +
>> + memory_region_init_ram(flash, NULL, "netduino.flash", FLASH_SIZE,
>> + &error_abort);
>> + memory_region_init_alias(flash_alias, NULL, "netduino.flash.alias",
>> + flash, 0, FLASH_SIZE);
>> +
>> + vmstate_register_ram_global(flash);
>> +
>> + memory_region_set_readonly(flash, true);
>> + memory_region_set_readonly(flash_alias, true);
>> +
>> + memory_region_add_subregion(system_memory, FLASH_BASE_ADDRESS, flash);
>> + memory_region_add_subregion(system_memory, 0, flash_alias);
>> +
>> + memory_region_init_ram(sram, NULL, "netduino.sram", SRAM_SIZE,
>> + &error_abort);
>
> There shouldn't be any refs to "netduino" like this.
Ok, I will remove
Thanks,
Alistair
>
> Regards,
> Peter
>
>> + vmstate_register_ram_global(sram);
>> + memory_region_add_subregion(system_memory, SRAM_BASE_ADDRESS, sram);
>> +
>> + pic = armv7m_init(get_system_memory(), FLASH_SIZE, 96,
>> + s->kernel_filename, s->cpu_model);
>> +
>> + /* System configuration controller */
>> + syscfgdev = DEVICE(&s->syscfg);
>> + object_property_set_bool(OBJECT(&s->syscfg), true, "realized", &err);
>> + if (err != NULL) {
>> + error_propagate(errp, err);
>> + return;
>> + }
>> + syscfgbusdev = SYS_BUS_DEVICE(syscfgdev);
>> + sysbus_mmio_map(syscfgbusdev, 0, 0x40013800);
>> + sysbus_connect_irq(syscfgbusdev, 0, pic[71]);
>> +
>> + /* Attach UART (uses USART registers) and USART controllers */
>> + for (i = 0; i < 5; i++) {
>> + usartdev = DEVICE(&(s->usart[i]));
>> + object_property_set_bool(OBJECT(&s->usart[i]), true, "realized",
>> &err);
>> + if (err != NULL) {
>> + error_propagate(errp, err);
>> + return;
>> + }
>> + usartbusdev = SYS_BUS_DEVICE(usartdev);
>> + sysbus_mmio_map(usartbusdev, 0, usart_addr[i]);
>> + sysbus_connect_irq(usartbusdev, 0, pic[usart_irq[i]]);
>> + }
>> +
>> + /* Timer 2 to 5 */
>> + for (i = 0; i < 4; i++) {
>> + timerdev = DEVICE(&(s->timer[i]));
>> + qdev_prop_set_uint64(timerdev, "clock-frequency", 1000000000);
>> + object_property_set_bool(OBJECT(&s->timer[i]), true, "realized",
>> &err);
>> + if (err != NULL) {
>> + error_propagate(errp, err);
>> + return;
>> + }
>> + timerbusdev = SYS_BUS_DEVICE(timerdev);
>> + sysbus_mmio_map(timerbusdev, 0, timer_addr[i]);
>> + sysbus_connect_irq(timerbusdev, 0, pic[timer_irq[i]]);
>> + }
>> +}
>> +
>> +static Property stm32f205_soc_properties[] = {
>> + DEFINE_PROP_STRING("kernel-filename", STM32F205State, kernel_filename),
>> + DEFINE_PROP_END_OF_LIST(),
>> +};
>> +
>> +static void stm32f205_soc_class_init(ObjectClass *klass, void *data)
>> +{
>> + DeviceClass *dc = DEVICE_CLASS(klass);
>> +
>> + dc->realize = stm32f205_soc_realize;
>> + dc->props = stm32f205_soc_properties;
>> +}
>> +
>> +static const TypeInfo stm32f205_soc_info = {
>> + .name = TYPE_STM32F205_SOC,
>> + .parent = TYPE_SYS_BUS_DEVICE,
>> + .instance_size = sizeof(STM32F205State),
>> + .instance_init = stm32f205_soc_initfn,
>> + .class_init = stm32f205_soc_class_init,
>> +};
>> +
>> +static void stm32f205_soc_types(void)
>> +{
>> + type_register_static(&stm32f205_soc_info);
>> +}
>> +
>> +type_init(stm32f205_soc_types)
>> diff --git a/include/hw/arm/stm32f205_soc.h b/include/hw/arm/stm32f205_soc.h
>> new file mode 100644
>> index 0000000..addc555
>> --- /dev/null
>> +++ b/include/hw/arm/stm32f205_soc.h
>> @@ -0,0 +1,69 @@
>> +/*
>> + * STM32F205 SoC
>> + *
>> + * Copyright (c) 2014 Alistair Francis <address@hidden>
>> + *
>> + * Permission is hereby granted, free of charge, to any person obtaining a
>> copy
>> + * of this software and associated documentation files (the "Software"), to
>> deal
>> + * in the Software without restriction, including without limitation the
>> rights
>> + * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
>> + * copies of the Software, and to permit persons to whom the Software is
>> + * furnished to do so, subject to the following conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be included
>> in
>> + * all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
>> OR
>> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
>> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
>> + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
>> OTHER
>> + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> FROM,
>> + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
>> + * THE SOFTWARE.
>> + */
>> +
>> +#ifndef HW_ARM_STM32F205SOC_H
>> +#define HW_ARM_STM32F205SOC_H
>> +
>> +#include "hw/sysbus.h"
>> +#include "hw/arm/arm.h"
>> +#include "hw/ssi.h"
>> +#include "hw/devices.h"
>> +#include "qemu/timer.h"
>> +#include "net/net.h"
>> +#include "elf.h"
>> +#include "hw/loader.h"
>> +#include "hw/boards.h"
>> +#include "exec/address-spaces.h"
>> +#include "qemu/error-report.h"
>> +#include "sysemu/qtest.h"
>> +#include "hw/misc/stm32f205_syscfg.h"
>> +#include "hw/timer/stm32f205_timer.h"
>> +#include "hw/char/stm32f205_usart.h"
>> +
>> +#define TYPE_STM32F205_SOC "stm32f205_soc"
>> +#define STM32F205_SOC(obj) \
>> + OBJECT_CHECK(STM32F205State, (obj), TYPE_STM32F205_SOC)
>> +
>> +#define STM_NUM_USARTS 5
>> +#define STM_NUM_TIMERS 5
>> +
>> +#define FLASH_BASE_ADDRESS 0x08000000
>> +#define FLASH_SIZE (1024 * 1024)
>> +#define SRAM_BASE_ADDRESS 0x20000000
>> +#define SRAM_SIZE (128 * 1024)
>> +
>> +typedef struct STM32F205State {
>> + /*< private >*/
>> + SysBusDevice parent_obj;
>> + /*< public >*/
>> +
>> + char *kernel_filename;
>> + char *cpu_model;
>> +
>> + STM32f205SyscfgState syscfg;
>> + STM32f205UsartState usart[STM_NUM_USARTS];
>> + STM32f205TimerState timer[STM_NUM_TIMERS];
>> +} STM32F205State;
>> +
>> +#endif
>> --
>> 1.9.1
>>
>>
- [Qemu-devel] [PATCH v5 2/7] stm32f205_USART: Add the stm32f205 USART Controller, (continued)
- [Qemu-devel] [PATCH v5 2/7] stm32f205_USART: Add the stm32f205 USART Controller, Alistair Francis, 2014/10/16
- [Qemu-devel] [PATCH v5 3/7] stm32f205_SYSCFG: Add the stm32f205 SYSCFG, Alistair Francis, 2014/10/16
- [Qemu-devel] [PATCH v5 4/7] target_arm: Remove memory region init from armv7m_init, Alistair Francis, 2014/10/16
- [Qemu-devel] [PATCH v5 5/7] target_arm: Parameterise the irq lines for armv7m_init, Alistair Francis, 2014/10/16
- [Qemu-devel] [PATCH v5 6/7] stm32f205: Add the stm32f205 SoC, Alistair Francis, 2014/10/16
- [Qemu-devel] [PATCH v5 7/7] netduino2: Add the Netduino 2 Machine, Alistair Francis, 2014/10/16