[Qemu-devel] [PATCH v6 09/32] target-arm: add banked register accessors

[Greg Bellows]

From: Fabian Aggeler <address@hidden>

If EL3 is in AArch32 state certain cp registers are banked (secure and
non-secure instance). When reading or writing to coprocessor registers
the following macros can be used.

- A32_BANKED macros are used for choosing the banked register based on provided
  input security argument.  This macro is used to choose the bank during
  translation of MRC/MCR instructions that are dependent on something other
  than the current secure state.
- A32_BANKED_CURRENT macros are used for choosing the banked register based on
  current secure state.  This is NOT to be used for choosing the bank used
  during translation as it breaks monitor mode.

If EL3 is operating in AArch64 state coprocessor registers are not
banked anymore. The macros use the non-secure instance (_ns) in this
case, which is architecturally mapped to the AArch64 EL register.

Signed-off-by: Sergey Fedorov <address@hidden>
Signed-off-by: Fabian Aggeler <address@hidden>
Signed-off-by: Greg Bellows <address@hidden>

==========

v5 -> v6
- Converted macro USE_SECURE_REG() into inlince function use_secure_reg()
- Globally replace Aarch# with AArch#

v4 -> v5
- Cleaned-up macros to try and alleviate misuse.  Made A32_BANKED macros take
  secure arg indicator rather than relying on USE_SECURE_REG.  Incorporated the
  A32_BANKED macros into the A32_BANKED_CURRENT.  CURRENT is now the only one
  that automatically chooses based on current secure state.
---
 target-arm/cpu.h | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 6e633cd..9f1613f 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -812,6 +812,46 @@ static inline bool arm_el_is_aa64(CPUARMState *env, int el)
     return arm_feature(env, ARM_FEATURE_AARCH64);
 }
 
+/* Function for determing whether to use the secure or non-secure bank of a CP
+ * register.  When EL3 is operating in AArch32 state, the NS-bit determines
+ * whether the secure instance of a cp-register should be used.
+ */
+static inline bool use_secure_reg(CPUARMState *env)
+{
+    bool ret = (arm_feature(env, ARM_FEATURE_EL3) &&
+                !arm_el_is_aa64(env, 3) &&
+                !(env->cp15.scr_el3 & SCR_NS));
+
+    return ret;
+}
+
+/* Macros for accessing a specified CP register bank */
+#define A32_BANKED_REG_GET(_env, _regname, _secure)    \
+    ((_secure) ? (_env)->cp15._regname##_s : (_env)->cp15._regname##_ns)
+
+#define A32_BANKED_REG_SET(_env, _regname, _secure, _val)   \
+    do {                                                \
+        if (_secure) {                                   \
+            (_env)->cp15._regname##_s = (_val);            \
+        } else {                                        \
+            (_env)->cp15._regname##_ns = (_val);           \
+        }                                               \
+    } while (0)
+
+/* Macros for automatically accessing a specific CP register bank depending on
+ * the current secure state of the system.  These macros are not intended for
+ * supporting instruction translation reads/writes as these are dependent
+ * solely on the SCR.NS bit and not the mode.
+ */
+#define A32_BANKED_CURRENT_REG_GET(_env, _regname)        \
+    A32_BANKED_REG_GET((_env), _regname,                \
+                       ((!arm_el_is_aa64((_env), 3) && arm_is_secure(_env))))
+
+#define A32_BANKED_CURRENT_REG_SET(_env, _regname, _val)                       
\
+    A32_BANKED_REG_SET((_env), _regname,                                    \
+                       ((!arm_el_is_aa64((_env), 3) && arm_is_secure(_env))),  
\
+                       (_val))
+
 void arm_cpu_list(FILE *f, fprintf_function cpu_fprintf);
 unsigned int arm_excp_target_el(CPUState *cs, unsigned int excp_idx);
 
-- 
1.8.3.2