[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master |
Date: |
Mon, 6 Oct 2014 19:26:21 +0300 |
On Mon, Oct 06, 2014 at 04:51:35PM +0200, Greg Kurz wrote:
> On Wed, 17 Sep 2014 20:39:25 +0300
> "Michael S. Tsirkin" <address@hidden> wrote:
>
> > On Wed, Sep 17, 2014 at 07:21:09PM +0200, Greg Kurz wrote:
> > > On Sun, 14 Sep 2014 21:30:36 +0300
> > > "Michael S. Tsirkin" <address@hidden> wrote:
> > >
> > > > Current support for bus master (clearing OK bit)
> > > > together with the need to support guests which do not
> > > > enable PCI bus mastering, leads to extra state in
> > > > VIRTIO_PCI_FLAG_BUS_MASTER_BUG bit, which isn't robust
> > > > in case of cross-version migration for the case when
> > > > guests use the device before setting DRIVER_OK.
> > > >
> > > > Rip out VIRTIO_PCI_FLAG_BUS_MASTER_BUG and implement a simpler
> > > > work-around: treat clearing of PCI_COMMAND as a virtio reset. Old
> > > > guests never touch this bit so they will work.
> > > >
> > > > As reset clears device status, DRIVER and MASTER bits are
> > > > now in sync, so we can fix up cross-version migration simply
> > > > by synchronising them, without need to detect a buggy guest
> > > > explicitly.
> > > >
> > > > Drop tracking VIRTIO_PCI_FLAG_BUS_MASTER_BUG completely.
> > > >
> > > > As reset makes the device quiescent, in the future we'll be able to drop
> > > > checking OK bit in a bunch of places.
> > > >
> > > > Cc: Jason Wang <address@hidden>
> > > > Cc: Greg Kurz <address@hidden>
> > > > Signed-off-by: Michael S. Tsirkin <address@hidden>
> > > > ---
> > >
> > > Hi Michael,
> > >
> > > I am not quite sure how to test this patch with my pseries based setup...
> > > Migrating from qemu-2.1 to qemu-master ?
> > >
> > > Cheers.
> > >
> > > --
> > > Greg
> >
> > Exactly. And back! Pls don't forget to specify the 2.1 machine type.
> > Thanks!
> >
>
> Michael,
>
> Nikunj and I had started to investigate the pseries breakage: the QEMU
> originated reset brought by this patch clears the vq and breaks SLOF.
> This isn't a surprise since reset should always come from the driver,
> not the device.
>
> Since commit 45363e46aeebfc99753389649eac7c7fc22bfe52 has reverted this
> patch, QEMU works again for pseries and virtio. :)
>
> So back to the initial issue, I've tried to migrate a pseries-2.1 guest
> running
> rhel65, from QEMU v2.1.2 to QEMU master, back and forth, several times and it
> always succeeded... what symptom this patch was expected to fix ?
>
> Cheers.
>
> --
> Greg
>
> > > > hw/virtio/virtio-pci.c | 39 ++++++++++++++++++++-------------------
> > > > 1 file changed, 20 insertions(+), 19 deletions(-)
> > > >
> > > > diff --git a/hw/virtio/virtio-pci.c b/hw/virtio/virtio-pci.c
> > > > index a827cd4..f560814 100644
> > > > --- a/hw/virtio/virtio-pci.c
> > > > +++ b/hw/virtio/virtio-pci.c
> > > > @@ -86,9 +86,6 @@
> > > > * 12 is historical, and due to x86 page size. */
> > > > #define VIRTIO_PCI_QUEUE_ADDR_SHIFT 12
> > > >
> > > > -/* Flags track per-device state like workarounds for quirks in older
> > > > guests. */
> > > > -#define VIRTIO_PCI_FLAG_BUS_MASTER_BUG (1 << 0)
> > > > -
> > > > static void virtio_pci_bus_new(VirtioBusState *bus, size_t bus_size,
> > > > VirtIOPCIProxy *dev);
> > > >
> > > > @@ -323,14 +320,6 @@ static void virtio_ioport_write(void *opaque,
> > > > uint32_t addr, uint32_t val)
> > > >
> > > > proxy->pci_dev.config[PCI_COMMAND] |
> > > > PCI_COMMAND_MASTER, 1);
> > > > }
> > > > -
> > > > - /* Linux before 2.6.34 sets the device as OK without enabling
> > > > - the PCI device bus master bit. In this case we need to
> > > > disable
> > > > - some safety checks. */
> > > > - if ((val & VIRTIO_CONFIG_S_DRIVER_OK) &&
> > > > - !(proxy->pci_dev.config[PCI_COMMAND] &
> > > > PCI_COMMAND_MASTER)) {
> > > > - proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
> > > > - }
> > > > break;
> > > > case VIRTIO_MSI_CONFIG_VECTOR:
> > > > msix_vector_unuse(&proxy->pci_dev, vdev->config_vector);
> > > > @@ -480,13 +469,18 @@ static void virtio_write_config(PCIDevice
> > > > *pci_dev, uint32_t address,
> > > > VirtIOPCIProxy *proxy = DO_UPCAST(VirtIOPCIProxy, pci_dev,
> > > > pci_dev);
> > > > VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
> > > >
> > > > + uint8_t cmd = proxy->pci_dev.config[PCI_COMMAND];
> > > > +
> > > > pci_default_write_config(pci_dev, address, val, len);
> > > >
> > > > if (range_covers_byte(address, len, PCI_COMMAND) &&
> > > > !(pci_dev->config[PCI_COMMAND] & PCI_COMMAND_MASTER) &&
> > > > - !(proxy->flags & VIRTIO_PCI_FLAG_BUS_MASTER_BUG)) {
> > > > + (cmd & PCI_COMMAND_MASTER)) {
> > > > + /* Bus driver disables bus mastering - make it act
> > > > + * as a kind of reset to render the device quiescent. */
> > > > virtio_pci_stop_ioeventfd(proxy);
> > > > - virtio_set_status(vdev, vdev->status &
> > > > ~VIRTIO_CONFIG_S_DRIVER_OK);
> > > > + virtio_reset(vdev);
> > > > + msix_unuse_all_vectors(&proxy->pci_dev);
> > > > }
> > > > }
> > > >
> > > > @@ -895,11 +889,19 @@ static void virtio_pci_vmstate_change(DeviceState
> > > > *d, bool running)
> > > > VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
> > > >
> > > > if (running) {
> > > > - /* Try to find out if the guest has bus master disabled, but is
> > > > - in ready state. Then we have a buggy guest OS. */
> > > > - if ((vdev->status & VIRTIO_CONFIG_S_DRIVER_OK) &&
> > > > - !(proxy->pci_dev.config[PCI_COMMAND] &
> > > > PCI_COMMAND_MASTER)) {
> > > > - proxy->flags |= VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
> > > > + /* Linux before 2.6.34 drives the device without enabling
> > > > + the PCI device bus master bit. Enable it automatically
> > > > + for the guest. This is a PCI spec violation but so is
> > > > + initiating DMA with bus master bit clear.
> > > > + Note: this only makes a difference when migrating
> > > > + across QEMU versions from an old QEMU, as for new QEMU
> > > > + bus master and driver bits are always in sync.
> > > > + TODO: consider enabling conditionally for compat machine
> > > > types. */
> > > > + if (vdev->status & (VIRTIO_CONFIG_S_ACKNOWLEDGE |
> > > > + VIRTIO_CONFIG_S_DRIVER)) {
> > > > + pci_default_write_config(&proxy->pci_dev, PCI_COMMAND,
> > > > +
> > > > proxy->pci_dev.config[PCI_COMMAND] |
> > > > + PCI_COMMAND_MASTER, 1);
> > > > }
> > > > virtio_pci_start_ioeventfd(proxy);
> > > > } else {
> > > > @@ -1040,7 +1042,6 @@ static void virtio_pci_reset(DeviceState *qdev)
> > > > virtio_pci_stop_ioeventfd(proxy);
> > > > virtio_bus_reset(bus);
> > > > msix_unuse_all_vectors(&proxy->pci_dev);
> > > > - proxy->flags &= ~VIRTIO_PCI_FLAG_BUS_MASTER_BUG;
> > > > }
> > > >
> > > > static Property virtio_pci_properties[] = {
> >
It's a race condition: you have to catch it migrating
in the window before DRIVER_OK is set.
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Greg Kurz, 2014/10/06
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master,
Michael S. Tsirkin <=
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Greg Kurz, 2014/10/06
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Michael S. Tsirkin, 2014/10/06
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Greg Kurz, 2014/10/13
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Michael S. Tsirkin, 2014/10/13
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Greg Kurz, 2014/10/13
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Alexander Graf, 2014/10/13
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Michael S. Tsirkin, 2014/10/13
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Michael S. Tsirkin, 2014/10/13
- Re: [Qemu-devel] [PATCH] virtio-pci: fix migration for pci bus master, Greg Kurz, 2014/10/13