Re: [Qemu-devel] [PATCH 5/6] qemu-char: Add reconnecting to client sockets

[Corey Minyard]

I haven't heard anything about these patches.  Is there anything I need
to do to get them included?

Thanks,

-corey

On 09/25/2014 03:07 PM, address@hidden wrote:
> From: Corey Minyard <address@hidden>
>
> Adds a "reconnect" option to socket backends that gives a reconnect
> timeout.  This only applies to client sockets.  If the other end
> of a socket closes the connection, qemu will attempt to reconnect
> after the given number of seconds.
>
> Signed-off-by: Corey Minyard <address@hidden>
> ---
>  qapi-schema.json | 15 ++++++----
>  qemu-char.c      | 88 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++----
>  qemu-options.hx  | 20 ++++++++-----
>  3 files changed, 105 insertions(+), 18 deletions(-)
>
> diff --git a/qapi-schema.json b/qapi-schema.json
> index 689b548..4226b97 100644
> --- a/qapi-schema.json
> +++ b/qapi-schema.json
> @@ -2648,14 +2648,19 @@
>  # @nodelay: #optional set TCP_NODELAY socket option (default: false)
>  # @telnet: #optional enable telnet protocol on server
>  #          sockets (default: false)
> +# @reconnect: #optional For a client socket, if a socket is disconnected,
> +#          then attempt a reconnect after the given number of seconds.
> +#          Setting this to zero disables this function. (default: 0)
> +#          (Since: 2.2)
>  #
>  # Since: 1.4
>  ##
> -{ 'type': 'ChardevSocket', 'data': { 'addr'     : 'SocketAddress',
> -                                     '*server'  : 'bool',
> -                                     '*wait'    : 'bool',
> -                                     '*nodelay' : 'bool',
> -                                     '*telnet'  : 'bool' } }
> +{ 'type': 'ChardevSocket', 'data': { 'addr'       : 'SocketAddress',
> +                                     '*server'    : 'bool',
> +                                     '*wait'      : 'bool',
> +                                     '*nodelay'   : 'bool',
> +                                     '*telnet'    : 'bool',
> +                                     '*reconnect' : 'int' } }
>  
>  ##
>  # @ChardevUdp:
> diff --git a/qemu-char.c b/qemu-char.c
> index b118e88..57567fe 100644
> --- a/qemu-char.c
> +++ b/qemu-char.c
> @@ -2501,8 +2501,20 @@ typedef struct {
>      SocketAddress *addr;
>      bool is_listen;
>      bool is_telnet;
> +
> +    guint reconnect_timer;
> +    int64_t reconnect_time;
>  } TCPCharDriver;
>  
> +static gboolean socket_reconnect_timeout(gpointer opaque);
> +
> +static void qemu_chr_socket_restart_timer(CharDriverState *chr)
> +{
> +    TCPCharDriver *s = chr->opaque;
> +    s->reconnect_timer = g_timeout_add_seconds(s->reconnect_time,
> +                                               socket_reconnect_timeout, 
> chr);
> +}
> +
>  static gboolean tcp_chr_accept(GIOChannel *chan, GIOCondition cond, void 
> *opaque);
>  
>  #ifndef _WIN32
> @@ -2784,6 +2796,9 @@ static void tcp_chr_disconnect(CharDriverState *chr)
>      SocketAddress_to_str(chr->filename, CHR_MAX_FILENAME_SIZE,
>                           "disconnected:", s->addr, s->is_listen, 
> s->is_telnet);
>      qemu_chr_be_event(chr, CHR_EVENT_CLOSED);
> +    if (s->reconnect_time) {
> +        qemu_chr_socket_restart_timer(chr);
> +    }
>  }
>  
>  static gboolean tcp_chr_read(GIOChannel *chan, GIOCondition cond, void 
> *opaque)
> @@ -2964,6 +2979,10 @@ static void tcp_chr_close(CharDriverState *chr)
>      TCPCharDriver *s = chr->opaque;
>      int i;
>  
> +    if (s->reconnect_timer) {
> +        g_source_remove(s->reconnect_timer);
> +     s->reconnect_timer = 0;
> +    }
>      qapi_free_SocketAddress(s->addr);
>      if (s->fd >= 0) {
>          remove_fd_in_watch(chr);
> @@ -3013,7 +3032,28 @@ static bool 
> qemu_chr_finish_socket_connection(CharDriverState *chr, int fd,
>          tcp_chr_connect(chr);
>      }
>  
> -    return chr;
> +    return true;
> +}
> +
> +static void qemu_chr_socket_connected(int fd, void *opaque)
> +{
> +    CharDriverState *chr = opaque;
> +    TCPCharDriver *s = chr->opaque;
> +    Error *err = NULL;
> +
> +    if (fd >= 0) {
> +        if (qemu_chr_finish_socket_connection(chr, fd, &err)) {
> +            return;
> +        }
> +        if (err) {
> +            error_report("%s", error_get_pretty(err));
> +            error_free(err);
> +        }
> +        closesocket(fd);
> +    }
> +
> +    s->connected = 0;
> +    qemu_chr_socket_restart_timer(chr);
>  }
>  
>  static bool qemu_chr_open_socket_fd(CharDriverState *chr, Error **errp)
> @@ -3023,7 +3063,10 @@ static bool qemu_chr_open_socket_fd(CharDriverState 
> *chr, Error **errp)
>  
>      if (s->is_listen) {
>          fd = socket_listen(s->addr, errp);
> -    } else  {
> +    } else if (s->reconnect_time) {
> +     fd = socket_connect(s->addr, errp, qemu_chr_socket_connected, chr);
> +     return (fd >= 0);
> +    } else {
>          fd = socket_connect(s->addr, errp, NULL, NULL);
>      }
>      if (fd < 0) {
> @@ -3450,6 +3493,7 @@ static void qemu_chr_parse_socket(QemuOpts *opts, 
> ChardevBackend *backend,
>      bool is_waitconnect = is_listen && qemu_opt_get_bool(opts, "wait", true);
>      bool is_telnet      = qemu_opt_get_bool(opts, "telnet", false);
>      bool do_nodelay     = !qemu_opt_get_bool(opts, "delay", true);
> +    int64_t reconnect   = qemu_opt_get_number(opts, "reconnect", 0);
>      const char *path = qemu_opt_get(opts, "path");
>      const char *host = qemu_opt_get(opts, "host");
>      const char *port = qemu_opt_get(opts, "port");
> @@ -3476,6 +3520,8 @@ static void qemu_chr_parse_socket(QemuOpts *opts, 
> ChardevBackend *backend,
>      backend->socket->telnet = is_telnet;
>      backend->socket->has_wait = true;
>      backend->socket->wait = is_waitconnect;
> +    backend->socket->has_reconnect = true;
> +    backend->socket->reconnect = reconnect;
>  
>      addr = g_new0(SocketAddress, 1);
>      if (path) {
> @@ -3875,6 +3921,9 @@ QemuOptsList qemu_chardev_opts = {
>              .name = "delay",
>              .type = QEMU_OPT_BOOL,
>          },{
> +            .name = "reconnect",
> +            .type = QEMU_OPT_NUMBER,
> +        },{
>              .name = "telnet",
>              .type = QEMU_OPT_BOOL,
>          },{
> @@ -4018,6 +4067,26 @@ static CharDriverState 
> *qmp_chardev_open_parallel(ChardevHostdev *parallel,
>  
>  #endif /* WIN32 */
>  
> +static gboolean socket_reconnect_timeout(gpointer opaque)
> +{
> +    CharDriverState *chr = opaque;
> +    TCPCharDriver *s = chr->opaque;
> +    Error *err;
> +
> +    s->reconnect_timer = 0;
> +
> +    if (chr->be_open) {
> +        return false;
> +    }
> +
> +    if (!qemu_chr_open_socket_fd(chr, &err)) {
> +        error_report("Unable to connect to char device %s\n", chr->label);
> +        qemu_chr_socket_restart_timer(chr);
> +    }
> +
> +    return false;
> +}
> +
>  static CharDriverState *qmp_chardev_open_socket(ChardevSocket *sock,
>                                                  Error **errp)
>  {
> @@ -4028,6 +4097,7 @@ static CharDriverState 
> *qmp_chardev_open_socket(ChardevSocket *sock,
>      bool is_listen      = sock->has_server  ? sock->server  : true;
>      bool is_telnet      = sock->has_telnet  ? sock->telnet  : false;
>      bool is_waitconnect = sock->has_wait    ? sock->wait    : false;
> +    int64_t reconnect   = sock->has_reconnect ? sock->reconnect : 0;
>  
>      chr = qemu_chr_alloc();
>      s = g_malloc0(sizeof(TCPCharDriver));
> @@ -4060,13 +4130,19 @@ static CharDriverState 
> *qmp_chardev_open_socket(ChardevSocket *sock,
>          if (is_telnet) {
>              s->do_telnetopt = 1;
>          }
> +    } else if (reconnect > 0) {
> +        s->reconnect_time = reconnect;
>      }
>  
>      if (!qemu_chr_open_socket_fd(chr, errp)) {
> -        g_free(s);
> -        g_free(chr->filename);
> -        g_free(chr);
> -        return NULL;
> +        if (s->reconnect_time) {
> +            qemu_chr_socket_restart_timer(chr);
> +        } else {
> +            g_free(s);
> +            g_free(chr->filename);
> +            g_free(chr);
> +            return NULL;
> +        }
>      }
>  
>      if (is_listen && is_waitconnect) {
> diff --git a/qemu-options.hx b/qemu-options.hx
> index 365b56c..22cf3b9 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -1930,9 +1930,9 @@ ETEXI
>  
>  DEF("chardev", HAS_ARG, QEMU_OPTION_chardev,
>      "-chardev null,id=id[,mux=on|off]\n"
> -    "-chardev 
> socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay]\n"
> -    "         [,server][,nowait][,telnet][,mux=on|off] (tcp)\n"
> -    "-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] 
> (unix)\n"
> +    "-chardev 
> socket,id=id[,host=host],port=port[,to=to][,ipv4][,ipv6][,nodelay][,reconnect=seconds]\n"
> +    "         [,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off] 
> (tcp)\n"
> +    "-chardev 
> socket,id=id,path=path[,server][,nowait][,telnet][,reconnect=seconds][,mux=on|off]
>  (unix)\n"
>      "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n"
>      "         [,localport=localport][,ipv4][,ipv6][,mux=on|off]\n"
>      "-chardev msmouse,id=id[,mux=on|off]\n"
> @@ -2004,7 +2004,7 @@ Options to each backend are described below.
>  A void device. This device will not emit any data, and will drop any data it
>  receives. The null backend does not take any options.
>  
> address@hidden -chardev socket ,address@hidden address@hidden options} or 
> @var{unix options}] [,server] [,nowait] [,telnet]
> address@hidden -chardev socket ,address@hidden address@hidden options} or 
> @var{unix options}] [,server] [,nowait] [,telnet] [,address@hidden
>  
>  Create a two-way stream socket, which can be either a TCP or a unix socket. A
>  unix socket will be created if @option{path} is specified. Behaviour is
> @@ -2018,6 +2018,10 @@ connect to a listening socket.
>  @option{telnet} specifies that traffic on the socket should interpret telnet
>  escape sequences.
>  
> address@hidden sets the timeout for reconnecting on non-server sockets when
> +the remote end goes away.  qemu will delay this many seconds and then attempt
> +to reconnect.  Zero disables reconnecting, and is the default.
> +
>  TCP and unix socket options are given below:
>  
>  @table @option
> @@ -2687,14 +2691,16 @@ telnet on port 5555 to access the QEMU port.
>  localhost 5555
>  @end table
>  
> address@hidden tcp:address@hidden:@var{port}[,@var{server}][,nowait][,nodelay]
> address@hidden 
> tcp:address@hidden:@var{port}[,@var{server}][,nowait][,nodelay][,address@hidden
>  The TCP Net Console has two modes of operation.  It can send the serial
>  I/O to a location or wait for a connection from a location.  By default
>  the TCP Net Console is sent to @var{host} at the @var{port}.  If you use
>  the @var{server} option QEMU will wait for a client socket application
>  to connect to the port before continuing, unless the @code{nowait}
>  option was specified.  The @code{nodelay} option disables the Nagle buffering
> -algorithm.  If @var{host} is omitted, 0.0.0.0 is assumed. Only
> +algorithm.  The @code{reconnect} option only applies if @var{noserver} is
> +set, if the connection goes down it will attempt to reconnect at the
> +given interval.  If @var{host} is omitted, 0.0.0.0 is assumed. Only
>  one TCP connection at a time is accepted. You can use @code{telnet} to
>  connect to the corresponding character device.
>  @table @code
> @@ -2715,7 +2721,7 @@ MAGIC_SYSRQ sequence if you use a telnet that supports 
> sending the break
>  sequence.  Typically in unix telnet you do it with Control-] and then
>  type "send break" followed by pressing the enter key.
>  
> address@hidden unix:@var{path}[,server][,nowait]
> address@hidden unix:@var{path}[,server][,nowait][,address@hidden
>  A unix domain socket is used instead of a tcp socket.  The option works the
>  same as if you had specified @code{-serial tcp} except the unix domain socket
>  @var{path} is used for connections.