qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v4 2/8] ahci: MSI capability should be at 0x80,


From: Jan Kiszka
Subject: Re: [Qemu-devel] [PATCH v4 2/8] ahci: MSI capability should be at 0x80, not 0x50.
Date: Wed, 17 Sep 2014 17:54:28 +0200
User-agent: Mozilla/5.0 (X11; U; Linux i686 (x86_64); de; rv:1.8.1.12) Gecko/20080226 SUSE/2.0.0.12-1.1 Thunderbird/2.0.0.12 Mnenhy/0.7.5.666

On 2014-08-21 19:44, John Snow wrote:
> In the Intel ICH9 data sheet, the MSI capability offset
> in the PCI configuration space for ICH9 AHCI devices is
> specified to be 0x80.
> 
> Further, the PCI capability pointer should always point
> to 0x80 in ICH9 devices, despite the fact that AHCI 1.3
> specifies that it should be pointing to PMCAP (Which in
> this instance would be 0x70) to maintain adherence to
> the Intel data sheet specifications and real observed behavior.
> 
> Signed-off-by: John Snow <address@hidden>
> ---
>  hw/ide/ich.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/ide/ich.c b/hw/ide/ich.c
> index a2f1639..8eb77a1 100644
> --- a/hw/ide/ich.c
> +++ b/hw/ide/ich.c
> @@ -71,6 +71,7 @@
>  #include <hw/ide/pci.h>
>  #include <hw/ide/ahci.h>
>  
> +#define ICH9_MSI_CAP_OFFSET     0x80
>  #define ICH9_SATA_CAP_OFFSET    0xA8
>  
>  #define ICH9_IDP_BAR            4
> @@ -115,7 +116,6 @@ static int pci_ich9_ahci_init(PCIDevice *dev)
>      /* XXX Software should program this register */
>      dev->config[0x90]   = 1 << 6; /* Address Map Register - AHCI mode */
>  
> -    msi_init(dev, 0x50, 1, true, false);
>      d->ahci.irq = pci_allocate_irq(dev);
>  
>      pci_register_bar(dev, ICH9_IDP_BAR, PCI_BASE_ADDRESS_SPACE_IO,
> @@ -135,6 +135,11 @@ static int pci_ich9_ahci_init(PCIDevice *dev)
>                   (ICH9_IDP_BAR + 0x4) | (ICH9_IDP_INDEX_LOG2 << 4));
>      d->ahci.idp_offset = ICH9_IDP_INDEX;
>  
> +    /* Although the AHCI 1.3 specification states that the first capability
> +     * should be PMCAP, the Intel ICH9 data sheet specifies that the ICH9
> +     * AHCI device puts the MSI capability first, pointing to 0x80. */
> +    msi_init(dev, ICH9_MSI_CAP_OFFSET, 1, true, false);
> +
>      return 0;
>  }
>  
> 

I did this for HDA recently, and it became clear that this requires a
compat switch to expose the old, broken layout to older guests.
Otherwise you can't migrate from them.

Jan

-- 
Siemens AG, Corporate Technology, CT RTC ITP SES-DE
Corporate Competence Center Embedded Linux



reply via email to

[Prev in Thread] Current Thread [Next in Thread]