qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH 1/1] xhci PCIe endpoint migration compatibility


From: Michael S. Tsirkin
Subject: Re: [Qemu-devel] [PATCH 1/1] xhci PCIe endpoint migration compatibility fix
Date: Tue, 9 Sep 2014 16:14:19 +0300

On Tue, Sep 09, 2014 at 11:19:43AM +0100, Dr. David Alan Gilbert (git) wrote:
> From: "Dr. David Alan Gilbert" <address@hidden>
> 
> Add back the PCIe config capabilities on XHCI cards in non-PCIe slots,
> but only for machine types before 2.1.

You can clear cmask for these bits to at least
make it work one way.

> This fixes a migration incompatibility in the XHCI PCI devices
> caused by:
>    058fdcf52cdbf57b67e7 - xhci: add endpoint cap on express bus only
> 
> Note that in fixing it for compatibility with older QEMUs, it breaks
> compatibility with existing QEMU 2.1's on older machine types.
> 
> The status before this patch was (if it used an XHCI adapter):
>    machine type | source qemu
>      any           pre-2.1     - FAIL
>      any           2.1...      - PASS
> 
> With this patch:
>    machine type | source qemu
>      any           pre-2.1    - PASS
>      pre-2.1       2.1...     - FAIL
>      2.1           2.1...     - PASS
> 
> A test to trigger it is to add '-device nec-usb-xhci,id=xhci,addr=0x12'
> to the command line.
>
> Signed-off-by: Dr. David Alan Gilbert <address@hidden>

Cc: address@hidden
Acked-by: Michael S. Tsirkin <address@hidden>

> ---
>  hw/usb/hcd-xhci.c    | 6 +++++-
>  include/hw/i386/pc.h | 5 +++++
>  2 files changed, 10 insertions(+), 1 deletion(-)
> 
> diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
> index bbe4c5f..73ced1f 100644
> --- a/hw/usb/hcd-xhci.c
> +++ b/hw/usb/hcd-xhci.c
> @@ -499,6 +499,7 @@ enum xhci_flags {
>      XHCI_FLAG_USE_MSI = 1,
>      XHCI_FLAG_USE_MSI_X,
>      XHCI_FLAG_SS_FIRST,
> +    XHCI_FLAG_FORCE_PCIE_ENDCAP,
>  };
>  
>  static void xhci_kick_ep(XHCIState *xhci, unsigned int slotid,
> @@ -3626,7 +3627,8 @@ static int usb_xhci_initfn(struct PCIDevice *dev)
>                       
> PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64,
>                       &xhci->mem);
>  
> -    if (pci_bus_is_express(dev->bus)) {
> +    if (pci_bus_is_express(dev->bus) ||
> +        xhci_get_flag(xhci, XHCI_FLAG_FORCE_PCIE_ENDCAP)) {
>          ret = pcie_endpoint_cap_init(dev, 0xa0);
>          assert(ret >= 0);
>      }
> @@ -3855,6 +3857,8 @@ static Property xhci_properties[] = {
>      DEFINE_PROP_BIT("msix",     XHCIState, flags, XHCI_FLAG_USE_MSI_X, true),
>      DEFINE_PROP_BIT("superspeed-ports-first",
>                      XHCIState, flags, XHCI_FLAG_SS_FIRST, true),
> +    DEFINE_PROP_BIT("force-pcie-endcap", XHCIState, flags,
> +                    XHCI_FLAG_FORCE_PCIE_ENDCAP, false),
>      DEFINE_PROP_UINT32("intrs", XHCIState, numintrs, MAXINTRS),
>      DEFINE_PROP_UINT32("slots", XHCIState, numslots, MAXSLOTS),
>      DEFINE_PROP_UINT32("p2",    XHCIState, numports_2, 4),
> diff --git a/include/hw/i386/pc.h b/include/hw/i386/pc.h
> index a39cb42..77316d5 100644
> --- a/include/hw/i386/pc.h
> +++ b/include/hw/i386/pc.h
> @@ -330,6 +330,11 @@ bool e820_get_entry(int, uint32_t, uint64_t *, uint64_t 
> *);
>              .value    = "off",\
>          },\
>          {\
> +            .driver   = "nec-usb-xhci",\
> +            .property = "force-pcie-endcap",\
> +            .value    = "on",\
> +        },\
> +        {\
>              .driver   = "pci-serial",\
>              .property = "prog_if",\
>              .value    = stringify(0),\
> -- 
> 1.9.3



reply via email to

[Prev in Thread] Current Thread [Next in Thread]