[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 00/30] AHCI test suite framework
From: |
John Snow |
Subject: |
[Qemu-devel] [PATCH v2 00/30] AHCI test suite framework |
Date: |
Mon, 4 Aug 2014 17:11:01 -0400 |
This patch series introduces a number of small fixes and tweaks to
help support an AHCI test suite that in the future I hope to expand
to a fuller regression suite to help guide the development of the
AHCI device support under, in particular, the Q35 machine type in QEMU.
Paolo Bonzini has contributed a number of cleanup and refactoring patches
that support changes to the PIO setup FIS packet construction code, which
is necessary for testing ths specification adherence of the IDENTIFY command,
which issues its data exclusively via PIO mechanisms.
The ahci-test code being checked in represents a minimum of functionality
needed in order to issue and receive commands from the AHCI HBA under the
libqos / qtest environment.
In V2, as detailed below, these tests are not currently expected to pass.
I will post a complementary patch outside of this set that highlights
the exact set of tests that will not pass, which can help verify at least
the portions of these tests that do work correctly.
Assertions that currently fail:
- Ordering of PCI capabilities as defined by either AHCI or Intel ICH9
- Boot-time values of the PxTFD register, which should not have valid
data until after a D2H FIS is received, but does in Qemu 2.1
- Boot-time values of the PxSIG register, which should have a specific
placeholder signature until the first D2H FIS is received, but is
currently blank.
- The "Descriptor Processed" interrupt is expected after the IDENTIFY
command exhausts the given PRDT, but is not seen.
V2:
"ide-test: add test for werror=stop"
- changed filename variable name
- altered the QMP event polling to avoid sleep
- debug_path file cleanup on exit.
"ide: stop PIO transfer on errors"
- Modified logic to be unconditional.
"ahci: construct PIO Setup FIS for PIO commands"
- Added in dma_memory_map success checks and error pathways.
"libqtest: Correct small memory leak."
- Corrected raw usage of free()
"ahci: Adding basic functionality qtest."
- Removed HBA type.
- Corrected cleanup order.
- Corrected raw usage of free()
- Removed needless conditional around g_free()
- Altered ahci_boot to return by value instead of parameter.
"ahci: Add test_pci_spec to ahci-test."
- Removed all ifdef logic in favor of runtime tuning. (--pedantic)
- Removed all warnings, all infractions are now hard assertions.
- Replaced g_assert with g_assert_cmphex in many cases
"ahci: add test_pci_enable to ahci-test."
- Removed MSI codepaths, as it was incomplete and unused.
"ahci: Add test_hba_spec to ahci-test."
- Removed unneeded macros
- Added in an optional bar_size return parameter to qpci_iomap
"ahci: Add test_identify case to ahci-test."
- Corrected raw usage of free()
For convenience; https://github.com/jnsnow/qemu/tree/ahci-test-v2
John Snow (13):
q35: Enable the ioapic device to be seen by qtest.
qtest: Adding qtest_memset and qmemset.
libqos: Correct memory leak
libqtest: Correct small memory leak.
libqos: Fixes a small memory leak.
libqos: allow qpci_iomap to return BAR mapping size
qtest/ide: Fix small memory leak
ahci: Adding basic functionality qtest.
ahci: Add test_pci_spec to ahci-test.
ahci: add test_pci_enable to ahci-test.
ahci: Add test_hba_spec to ahci-test.
ahci: Add test_hba_enable to ahci-test.
ahci: Add test_identify case to ahci-test.
Paolo Bonzini (17):
blkdebug: report errors on flush too
libqtest: add QTEST_LOG for debugging qtest testcases
ide-test: add test for werror=stop
ide: stash aiocb for flushes
ide: simplify reset callbacks
ide: simplify set_inactive callbacks
ide: simplify async_cmd_done callbacks
ide: simplify start_transfer callbacks
ide: wrap start_dma callback
ide: remove wrong setting of BM_STATUS_INT
ide: fold add_status callback into set_inactive
ide: move BM_STATUS bits to pci.[ch]
ide: move retry constants out of BM_STATUS_* namespace
ahci: remove duplicate PORT_IRQ_* constants
ide: stop PIO transfer on errors
ide: make all commands go through cmd_done
ahci: construct PIO Setup FIS for PIO commands
block/blkdebug.c | 20 +
hw/i386/pc_q35.c | 2 +-
hw/ide/ahci.c | 115 ++--
hw/ide/ahci.h | 21 -
hw/ide/atapi.c | 11 +-
hw/ide/core.c | 94 ++-
hw/ide/internal.h | 38 +-
hw/ide/macio.c | 9 -
hw/ide/pci.c | 45 +-
hw/ide/pci.h | 7 +
tests/Makefile | 2 +
tests/ahci-test.c | 1555 +++++++++++++++++++++++++++++++++++++++++++++
tests/ide-test.c | 85 ++-
tests/libqos/malloc-pc.c | 3 +
tests/libqos/pci-pc.c | 12 +-
tests/libqos/pci-pc.h | 1 +
tests/libqos/pci.c | 10 +-
tests/libqos/pci.h | 4 +-
tests/libqtest.c | 20 +-
tests/libqtest.h | 24 +
tests/usb-hcd-ehci-test.c | 2 +-
21 files changed, 1892 insertions(+), 188 deletions(-)
create mode 100644 tests/ahci-test.c
--
1.9.3
- [Qemu-devel] [PATCH v2 00/30] AHCI test suite framework,
John Snow <=
- [Qemu-devel] [PATCH v2 01/30] blkdebug: report errors on flush too, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 05/30] ide: simplify reset callbacks, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 02/30] libqtest: add QTEST_LOG for debugging qtest testcases, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 07/30] ide: simplify async_cmd_done callbacks, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 03/30] ide-test: add test for werror=stop, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 09/30] ide: wrap start_dma callback, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 08/30] ide: simplify start_transfer callbacks, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 06/30] ide: simplify set_inactive callbacks, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 11/30] ide: fold add_status callback into set_inactive, John Snow, 2014/08/04
- [Qemu-devel] [PATCH v2 04/30] ide: stash aiocb for flushes, John Snow, 2014/08/04